Print Report | Back to Sample Detail

Sample Record for 2025-09-20-31

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 5016 DEA: 080K8004 QA Service Level: 1
DIST-CO-RTE-PM: 08-SBd-395-51.9/58.1,61.0/65.6
Work Description: OVERLAY RUBBERIZED HOT MIX ASPHALT AND DIG OUTS
Location Description:
Contractor Name: GRANITE CONSTRUCTION COMPANY
Contractor Address: P O BOX 50085, WATSONVILLE CA 950775085
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2025-09-20-31
TL Number from the TL Form:
Sample Submitted By Organization: CT D04 - Richmond Field Laboratory
Sample Organization Contact: (510) 231-7151
Type of Sample: Quality Assurance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 09/20/2025
Date that the sample was received by the laboratory/organization performing the testing: 09/20/2025
The quantity of what the sample constitutes: 2 Bags
A brief description of the sample: Aggregates
From where was the sample collected: Manufacturer
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Dutra Richmond

Material Information

HMA Type: Type A HMA
HMA Grading: 3/4 inch
Lot number: 1
Sublot number: 1
HMA Mix Number: L240097
Binder content (%): 5.2
Virgin binder PG:
Design binder PG:
Binder Supplier: Valero Benicia
RAP content (%): 15
WMA Additives:
Antistrip type: WMA AD-Here XL-9000
Test results on following page(s): 2

Test Results

Test 1 of 2

DIME Test ID: 2025-09-20-31-1
Test Method: AASHTO T308-25: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 10/08/2025
Date Tested: 10/07/2025
Submitted By Organization: CT D04 - Richmond Field Laboratory
Organization Address: 3401 Regatta Boulevard,
Organization City: Richmond
Organization State: CA
Organization Zipcode: 94508
Organization Email: santiago.sequeira@dot.ca.gov
Organization Phone: (510) 385-7641
General Comments for this Test: Sample 1 For Correction Factor
Test Result Compliance: complies
Additional Comments When Verified:
What temperature unit is used? Celsius
Test procedure used? Method A
Corrected Asphalt Binder Content 5.54 %
Mass of HMA Sample prior to ignition 1968.6 g
Mass Loss 136.4 g
Correction Factor (Percent by mass of HMA Specimen) no data0 %
Moisture Content no data0 %
Temperature Compensation Factor 0.14 %
Test Temperature 538 C

Test 2 of 2

DIME Test ID: 2025-09-20-31-2
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 10/08/2025
Date Tested: 10/07/2025
Submitted By Organization: CT D04 - Richmond Field Laboratory
Organization Address: 3401 Regatta Boulevard,
Organization City: Richmond
Organization State: CA
Organization Zipcode: 94508
Organization Email: santiago.sequeira@dot.ca.gov
Organization Phone: (510) 385-7641
General Comments for this Test: Sample 2 for correction Factor
Test Result Compliance: complies
Additional Comments When Verified:
What temperature unit is used? Celsius
Test procedure used? Method A
Mass of HMA Sample prior to ignition 2104 g
Corrected Asphalt Binder Content 5.47 %
Mass Loss 134.9 g
Correction Factor (Percent by mass of HMA Specimen) no data0 %
Moisture Content no data0 %
Temperature Compensation Factor 0.14 %
Test Temperature 538 C