Print Report | Back to Sample Detail

Sample Record for 2025-09-18-68

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 66669 DEA: JMF-DATA EFIS: JMF-DATA QA Service Level:
DIST-CO-RTE-PM: 59---
Work Description: Special project for storing JMF sample data
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2025-09-18-68
TL Number from the TL Form:
Sample Submitted By Organization: RMA Group - Rancho Cucamonga
Sample Organization Contact: (909) 989-1751
Type of Sample: Quality Control
Type of Material: Asphalt Rubber Binder
Sample Taken Date: 09/18/2025
Date that the sample was received by the laboratory/organization performing the testing: 09/15/2025
The quantity of what the sample constitutes: 7.5%
A brief description of the sample: Rubber Binder
From where was the sample collected: Source
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: San Joaquin Refinery

Material Information

Asphalt modifier supplier:
Performance Grade: PG 64-16
Lot number:
Sublot number:
Asphalt Rubber Binder Mix Number:

Test Results

Test 1 of 15

DIME Test ID: 2025-09-18-68-1
Test Method: ASTM D217-16: Standard Test Methods for Cone Penetration of Lubricating Grease (Cone Penetration)
Verified Date: 10/07/2025
Date Tested: 09/18/2025
Submitted By Organization: RMA Group - Rancho Cucamonga
Organization Address: 12130 Santa Margarita Court,
Organization City: Rancho Cucamonga
Organization State: CA
Organization Zipcode: 91730
Organization Email: cbachler@rmacompanies.com
Organization Phone: (909) 989-1751
General Comments for this Test: Submitted from JMF - Ray Alcantara
Test Result Compliance:
Additional Comments When Verified:
Determination Block Penetration
Block Penetration no data
Minutes Reaction 45

Test 2 of 15

DIME Test ID: 2025-09-18-68-2
Test Method: ASTM D217-16: Standard Test Methods for Cone Penetration of Lubricating Grease (Cone Penetration)
Verified Date: 10/07/2025
Date Tested: 09/01/2025
Submitted By Organization: RMA Group - Rancho Cucamonga
Organization Address: 12130 Santa Margarita Court,
Organization City: Rancho Cucamonga
Organization State: CA
Organization Zipcode: 91730
Organization Email: cbachler@rmacompanies.com
Organization Phone: (909) 989-1751
General Comments for this Test: Submitted from JMF - Ray Alcantara
Test Result Compliance:
Additional Comments When Verified:
Determination Block Penetration
Block Penetration no data
Minutes Reaction 240

Test 3 of 15

DIME Test ID: 2025-09-18-68-3
Test Method: ASTM D217-16: Standard Test Methods for Cone Penetration of Lubricating Grease (Cone Penetration)
Verified Date: 10/07/2025
Date Tested: 09/01/2025
Submitted By Organization: RMA Group - Rancho Cucamonga
Organization Address: 12130 Santa Margarita Court,
Organization City: Rancho Cucamonga
Organization State: CA
Organization Zipcode: 91730
Organization Email: cbachler@rmacompanies.com
Organization Phone: (909) 989-1751
General Comments for this Test: Submitted from JMF - Ray Alcantara
Test Result Compliance:
Additional Comments When Verified:
Determination Block Penetration
Block Penetration no data
Minutes Reaction 1440

Test 4 of 15

DIME Test ID: 2025-09-18-68-4
Test Method: ASTM D5329-16: Standard Test Methods for Sealants and Fillers, Hot-Applied, for Joints and Cracks in Asphalt Pavements and Portland Cement Concrete Pavements (Asphalt Pavement)
Verified Date: 10/07/2025
Date Tested: 10/07/2025
Submitted By Organization: RMA Group - Rancho Cucamonga
Organization Address: 12130 Santa Margarita Court,
Organization City: Rancho Cucamonga
Organization State: CA
Organization Zipcode: 91730
Organization Email: cbachler@rmacompanies.com
Organization Phone: (909) 989-1751
General Comments for this Test: Submitted from JMF - Ray Alcantara
Test Result Compliance:
Additional Comments When Verified:
Temperature no data
Ball Penetration (P1) no data
Final Dial reading (F1) no data
Ball Penetration (P2) no data
Final Dial reading (F2) no data
Ball Penetration (P3) no data
Final Dial reading (F3) no data
Resilience 1 no data
Resilience 2 no data
Resilience 3 no data
Average Resilience 34 %
Minutes Reaction 240

Test 5 of 15

DIME Test ID: 2025-09-18-68-5
Test Method: ASTM D5329-16: Standard Test Methods for Sealants and Fillers, Hot-Applied, for Joints and Cracks in Asphalt Pavements and Portland Cement Concrete Pavements (Asphalt Pavement)
Verified Date: 10/07/2025
Date Tested: 10/07/2025
Submitted By Organization: RMA Group - Rancho Cucamonga
Organization Address: 12130 Santa Margarita Court,
Organization City: Rancho Cucamonga
Organization State: CA
Organization Zipcode: 91730
Organization Email: cbachler@rmacompanies.com
Organization Phone: (909) 989-1751
General Comments for this Test: Submitted from JMF - Ray Alcantara
Test Result Compliance:
Additional Comments When Verified:
Temperature no data
Ball Penetration (P1) no data
Final Dial reading (F1) no data
Ball Penetration (P2) no data
Final Dial reading (F2) no data
Ball Penetration (P3) no data
Final Dial reading (F3) no data
Resilience 1 no data
Resilience 2 no data
Resilience 3 no data
Average Resilience 27 %
Minutes Reaction 1440

Test 6 of 15

DIME Test ID: 2025-09-18-68-6
Test Method: ASTM D36-14ε1: Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus) (Softening Point)
Verified Date: 10/07/2025
Date Tested: 09/18/2025
Submitted By Organization: RMA Group - Rancho Cucamonga
Organization Address: 12130 Santa Margarita Court,
Organization City: Rancho Cucamonga
Organization State: CA
Organization Zipcode: 91730
Organization Email: cbachler@rmacompanies.com
Organization Phone: (909) 989-1751
General Comments for this Test: Submitted from JMF - Ray Alcantara
Test Result Compliance:
Additional Comments When Verified:
ASTM Thermometer used? C
Softening Point Sample 1 59 C
Softening Point Sample 2 no data
Bath Liquid no data
Minutes Reaction 45

Test 7 of 15

DIME Test ID: 2025-09-18-68-7
Test Method: ASTM D36-14ε1: Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus) (Softening Point)
Verified Date: 10/07/2025
Date Tested: 09/18/2025
Submitted By Organization: RMA Group - Rancho Cucamonga
Organization Address: 12130 Santa Margarita Court,
Organization City: Rancho Cucamonga
Organization State: CA
Organization Zipcode: 91730
Organization Email: cbachler@rmacompanies.com
Organization Phone: (909) 989-1751
General Comments for this Test: Submitted from JMF - Ray Alcantara
Test Result Compliance:
Additional Comments When Verified:
ASTM Thermometer used? C
Softening Point Sample 1 69 C
Softening Point Sample 2 no data
Bath Liquid no data
Minutes Reaction 240

Test 8 of 15

DIME Test ID: 2025-09-18-68-8
Test Method: ASTM D36-14ε1: Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus) (Softening Point)
Verified Date: 10/07/2025
Date Tested: 09/18/2025
Submitted By Organization: RMA Group - Rancho Cucamonga
Organization Address: 12130 Santa Margarita Court,
Organization City: Rancho Cucamonga
Organization State: CA
Organization Zipcode: 91730
Organization Email: cbachler@rmacompanies.com
Organization Phone: (909) 989-1751
General Comments for this Test: Submitted from JMF - Ray Alcantara
Test Result Compliance:
Additional Comments When Verified:
ASTM Thermometer used? C
Softening Point Sample 1 70 C
Softening Point Sample 2 no data
Bath Liquid no data
Minutes Reaction 1440

Test 9 of 15

DIME Test ID: 2025-09-18-68-9
Test Method: ASTM D7741-11ε1: Standard Test Method for Measurement of Apparent Viscosity of Asphalt-Rubber or Other Asphalt Binders by Using a Rotational Handheld Viscometer (Viscosity)
Verified Date: 10/07/2025
Date Tested: 09/18/2025
Submitted By Organization: RMA Group - Rancho Cucamonga
Organization Address: 12130 Santa Margarita Court,
Organization City: Rancho Cucamonga
Organization State: CA
Organization Zipcode: 91730
Organization Email: cbachler@rmacompanies.com
Organization Phone: (909) 989-1751
General Comments for this Test: Submitted from JMF - Ray Alcantara
Test Result Compliance:
Additional Comments When Verified:
Unit system used? US Units
Test Temperature no data
Average Viscosity 2560.0
Minutes Reaction 45

Test 10 of 15

DIME Test ID: 2025-09-18-68-10
Test Method: ASTM D7741-11ε1: Standard Test Method for Measurement of Apparent Viscosity of Asphalt-Rubber or Other Asphalt Binders by Using a Rotational Handheld Viscometer (Viscosity)
Verified Date: 10/07/2025
Date Tested: 09/18/2025
Submitted By Organization: RMA Group - Rancho Cucamonga
Organization Address: 12130 Santa Margarita Court,
Organization City: Rancho Cucamonga
Organization State: CA
Organization Zipcode: 91730
Organization Email: cbachler@rmacompanies.com
Organization Phone: (909) 989-1751
General Comments for this Test: Submitted from JMF - Ray Alcantara
Test Result Compliance:
Additional Comments When Verified:
Unit system used? US Units
Test Temperature no data
Average Viscosity 2460.0
Minutes Reaction 60

Test 11 of 15

DIME Test ID: 2025-09-18-68-11
Test Method: ASTM D7741-11ε1: Standard Test Method for Measurement of Apparent Viscosity of Asphalt-Rubber or Other Asphalt Binders by Using a Rotational Handheld Viscometer (Viscosity)
Verified Date: 10/07/2025
Date Tested: 09/18/2025
Submitted By Organization: RMA Group - Rancho Cucamonga
Organization Address: 12130 Santa Margarita Court,
Organization City: Rancho Cucamonga
Organization State: CA
Organization Zipcode: 91730
Organization Email: cbachler@rmacompanies.com
Organization Phone: (909) 989-1751
General Comments for this Test: Submitted from JMF - Ray Alcantara
Test Result Compliance:
Additional Comments When Verified:
Unit system used? US Units
Test Temperature no data
Average Viscosity 2330.0
Minutes Reaction 90

Test 12 of 15

DIME Test ID: 2025-09-18-68-12
Test Method: ASTM D7741-11ε1: Standard Test Method for Measurement of Apparent Viscosity of Asphalt-Rubber or Other Asphalt Binders by Using a Rotational Handheld Viscometer (Viscosity)
Verified Date: 10/07/2025
Date Tested: 09/18/2025
Submitted By Organization: RMA Group - Rancho Cucamonga
Organization Address: 12130 Santa Margarita Court,
Organization City: Rancho Cucamonga
Organization State: CA
Organization Zipcode: 91730
Organization Email: cbachler@rmacompanies.com
Organization Phone: (909) 989-1751
General Comments for this Test: Submitted from JMF - Ray Alcantara
Test Result Compliance:
Additional Comments When Verified:
Unit system used? US Units
Test Temperature no data
Average Viscosity 2170.0
Minutes Reaction 120

Test 13 of 15

DIME Test ID: 2025-09-18-68-13
Test Method: ASTM D7741-11ε1: Standard Test Method for Measurement of Apparent Viscosity of Asphalt-Rubber or Other Asphalt Binders by Using a Rotational Handheld Viscometer (Viscosity)
Verified Date: 10/07/2025
Date Tested: 09/18/2025
Submitted By Organization: RMA Group - Rancho Cucamonga
Organization Address: 12130 Santa Margarita Court,
Organization City: Rancho Cucamonga
Organization State: CA
Organization Zipcode: 91730
Organization Email: cbachler@rmacompanies.com
Organization Phone: (909) 989-1751
General Comments for this Test: Submitted from JMF - Ray Alcantara
Test Result Compliance:
Additional Comments When Verified:
Unit system used? US Units
Test Temperature no data
Average Viscosity 2035.0
Minutes Reaction 240

Test 14 of 15

DIME Test ID: 2025-09-18-68-14
Test Method: ASTM D7741-11ε1: Standard Test Method for Measurement of Apparent Viscosity of Asphalt-Rubber or Other Asphalt Binders by Using a Rotational Handheld Viscometer (Viscosity)
Verified Date: 10/07/2025
Date Tested: 09/18/2025
Submitted By Organization: RMA Group - Rancho Cucamonga
Organization Address: 12130 Santa Margarita Court,
Organization City: Rancho Cucamonga
Organization State: CA
Organization Zipcode: 91730
Organization Email: cbachler@rmacompanies.com
Organization Phone: (909) 989-1751
General Comments for this Test: Submitted from JMF - Ray Alcantara
Test Result Compliance:
Additional Comments When Verified:
Unit system used? US Units
Test Temperature no data
Average Viscosity 1960.0
Minutes Reaction 360

Test 15 of 15

DIME Test ID: 2025-09-18-68-15
Test Method: ASTM D7741-11ε1: Standard Test Method for Measurement of Apparent Viscosity of Asphalt-Rubber or Other Asphalt Binders by Using a Rotational Handheld Viscometer (Viscosity)
Verified Date: 10/07/2025
Date Tested: 09/18/2025
Submitted By Organization: RMA Group - Rancho Cucamonga
Organization Address: 12130 Santa Margarita Court,
Organization City: Rancho Cucamonga
Organization State: CA
Organization Zipcode: 91730
Organization Email: cbachler@rmacompanies.com
Organization Phone: (909) 989-1751
General Comments for this Test: Submitted from JMF - Ray Alcantara
Test Result Compliance:
Additional Comments When Verified:
Unit system used? US Units
Test Temperature no data
Average Viscosity 1710.0
Minutes Reaction 1440