Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 1000014 DEA: 010H1504 EFIS: 0117000116
QA Service Level: 1
DIST-CO-RTE-PM: 01-MEN-162-R0.0/25.7
Work Description: HMA, RHMA, AND GEOSYNTHETIC PAVEMENT INTERLAYER.
Location Description: MENDOCINO COUNTY NEAR LONGVALE FROM ROUTE 101 TO 1.1 MILES SOUTH OF POONKINNEY ROAD NEAR COVELO
Contractor Name: GRANITE CONSTRUCTION COMPANY
Contractor Address: Unknown
Resident Engineer: Steve Tisell Structure Rep.: Unknown
DIME Sample ID: 2025-09-24-53
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Sample Organization Contact: (916) 227-7302
Type of Sample: Quality Assurance
Type of Material: Asphalt Binder
Sample Taken Date: 09/24/2025
Date that the sample was received by the laboratory/organization performing the testing: 10/03/2025
The quantity of what the sample constitutes: 1 can binder
A brief description of the sample: 1 can PG 58-22
From where was the sample collected: Source
Laboratory sample identification: 25-187
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Granite Ukiah
Performance Grade: PG 58-22
Modified:
Lot number: 1
Sublot number: 4
Tank number:
Time of sample: 10:15
HMA Supplier:
Certified Asphalt Supplier: Valero Marketing & Supply - Benicia CA
Multigrade: No
Multigrade Type:
Asphalt Binder Mix Number:
DIME Test ID: 2025-09-24-53-1
Test Method: AASHTO T315-24: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Verified Date: 10/08/2025
Date Tested: 10/07/2025
Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (530) 713-6823
General Comments for this Test: Original
Test Result Compliance: complies
Additional Comments When Verified:
|
Phase
|
Original binder
|
|
Test Gap
|
1 mm
|
|
Test Frequency
|
10.0 rad/s
|
|
Strain Amplitude
|
12.06 %
|
|
Stress Amplitude
|
0.175 kPa
|
|
Phase Angle (δ) (for the 10 cycles)
|
87.3 degree
|
|
Complex Modulus (G*) (for the 10 measurements)
|
1.454 kPa
|
|
Test Temperature (Specimen 1)
|
58.0 C
|
|
Dynamic Shear, G*/sin(δ)
|
1.46 kPa
|
