Print Report | Back to Sample Detail

Sample Record for 2025-09-24-48

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 994583 DEA: 07333604 EFIS: 0716000313 QA Service Level: 1
DIST-CO-RTE-PM: 07-LA-2-2.3/14.2
Work Description: COLD PLANE AC, PLACE HMA, REPLACE CURB RAMPS AND TRAFFIC SIGNALS.
Location Description: LOS ANGELES COUNTY IN LOS ANGELES AT VARIOUS LOCATIONS FROM CENTINELA AVENUE TO GLENDALE BOULEVARD UNDERCROSSING
Contractor Name: SULLY-MILLER CONTRACTING COMPANY
Contractor Address: Unknown
Resident Engineer: Denrick Bautista Structure Rep.: Gon Choi

Sample Information

DIME Sample ID: 2025-09-24-48
TL Number from the TL Form:
Sample Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Sample Organization Contact: 213-792-4794
Type of Sample: Verification
Type of Material: Aggregate
Sample Taken Date: 09/24/2025
Date that the sample was received by the laboratory/organization performing the testing: 10/01/2025
The quantity of what the sample constitutes: 5 Bags of Combined Aggregate, 4 Bags of RAP
A brief description of the sample: JMF Verification, 3/4" WMA A SP R25 EVO .6%
From where was the sample collected: Manufacturer
Laboratory sample identification: 0616A-25
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Blue Diamond-Irwindale

Material Information

Source Identification (SMARA, name of Pit or Job Site): 91-19-0052
The fabricator's/manufacturer's product name for the sample:
The fabricator/manufacturer designation for the sample:
The plant number:
A detailed description of where the material sample was collected: Belt Cut at Vulcan Irwindale Plant
Where the material sample would have been placed if not sampled:
Primary Aggregate Nominal Size: 3/4 inch
The concrete mix design number: 300154-R25 WMA
Lot number:
Sublot number:
Aggregate Mix Number: 300154R25WMA

Test Results

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
2025-09-24-48-1AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)10/01/2025Not scheduledJulius EsonwuneCT D08 - Fontana Southern Regional Laboratory
2025-09-24-48-2AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)10/01/2025Not scheduledJulius EsonwuneCT D08 - Fontana Southern Regional Laboratory
2025-09-24-48-3AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)10/01/2025Not scheduledJulius EsonwuneCT D08 - Fontana Southern Regional Laboratory
2025-09-24-48-4AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)10/01/2025Not scheduledJulius EsonwuneCT D08 - Fontana Southern Regional Laboratory
2025-09-24-48-5AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)10/01/2025Not scheduledJulius EsonwuneCT D08 - Fontana Southern Regional Laboratory
2025-09-24-48-6AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)10/01/2025Not scheduledJulius EsonwuneCT D08 - Fontana Southern Regional Laboratory
2025-09-24-48-7AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)10/01/2025Not scheduledJulius EsonwuneCT D08 - Fontana Southern Regional Laboratory
2025-09-24-48-8ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)10/01/2025Not scheduledJulius EsonwuneCT D08 - Fontana Southern Regional Laboratory
2025-09-24-48-9CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates10/01/2025Not scheduledJulius EsonwuneCT D08 - Fontana Southern Regional Laboratory
2025-09-24-48-10CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates10/01/2025Not scheduledJulius EsonwuneCT D08 - Fontana Southern Regional Laboratory