Print Report | Back to Sample Detail

Sample Record for 2025-09-22-27

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 994586 DEA: 081C08U4 EFIS: 0822000142 QA Service Level: 1
DIST-CO-RTE-PM: 08-RIV-10-R134.0/R156.5
Work Description: PLACE HMA (TYPE A), JPCP, IMPORTED BORROW, ROADWAY EXCAVATION & CL2 AB
Location Description: RIVERSIDE COUNTY FROM 1.1 MILES WEST OF WILEY WELL ROAD OVERCROSSING TO CALIFORNIA/ARIZONA STATE LINE
Contractor Name: FISHER SAND & GRAVEL CO.
Contractor Address: 19062 San Jose Avenue, LA Puente, CA 91748
Resident Engineer: Ryan Espoy (cc on Reports) Structure Rep.: Tim Flores

Sample Information

DIME Sample ID: 2025-09-22-27
TL Number from the TL Form:
Sample Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Sample Organization Contact: 213-792-4794
Type of Sample: Verification
Type of Material: Aggregate
Sample Taken Date: 09/22/2025
Date that the sample was received by the laboratory/organization performing the testing: 09/26/2025
The quantity of what the sample constitutes: 8 Bags L.T. Agg, 6 Bags Virgin Agg, 2 Bags Rap
A brief description of the sample: Milestone 3/4" HMA-A-SP R24 1.0% LSM
From where was the sample collected: Manufacturer
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Fisher Sand and Gravel-Tempe

Material Information

Source Identification (SMARA, name of Pit or Job Site): CM203 Ehrenberg
The fabricator's/manufacturer's product name for the sample:
The fabricator/manufacturer designation for the sample:
The plant number:
A detailed description of where the material sample was collected: Belt cut at Fisher Sand and Gravel-Tempe
Where the material sample would have been placed if not sampled:
Primary Aggregate Nominal Size: 3/4 inch
The concrete mix design number:
Lot number:
Sublot number:
Aggregate Mix Number:

Test Results

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
2025-09-22-27-1AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)09/26/2025Not scheduledSatish JainCT D08 - Fontana Southern Regional Laboratory
2025-09-22-27-2AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)09/26/2025Not scheduledSatish JainCT D08 - Fontana Southern Regional Laboratory
2025-09-22-27-3AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)09/26/2025Not scheduledSatish JainCT D08 - Fontana Southern Regional Laboratory
2025-09-22-27-4AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)09/26/2025Not scheduledSatish JainCT D08 - Fontana Southern Regional Laboratory
2025-09-22-27-5AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)09/26/2025Not scheduledSatish JainCT D08 - Fontana Southern Regional Laboratory
2025-09-22-27-6AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)09/26/2025Not scheduledSatish JainCT D08 - Fontana Southern Regional Laboratory
2025-09-22-27-7AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)09/26/2025Not scheduledSatish JainCT D08 - Fontana Southern Regional Laboratory
2025-09-22-27-8ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)09/26/2025Not scheduledSatish JainCT D08 - Fontana Southern Regional Laboratory
2025-09-22-27-9CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates09/26/2025Not scheduledSatish JainCT D08 - Fontana Southern Regional Laboratory
2025-09-22-27-10CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates09/26/2025Not scheduledSatish JainCT D08 - Fontana Southern Regional Laboratory