Print Report | Back to Sample Detail

Sample Record for 2025-04-17-109

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 994812 DEA: 042K7204 EFIS: 0417000014 QA Service Level: 1
DIST-CO-RTE-PM: 04-CC-4-R14.3/24.3
Work Description: Pvmt rehabilitation, slab repl, ADA curb ramp and install guardrail.
Location Description: On state highway in Contra Costa County in and near Concord and Pittsburg from 0.3 miles east of Peralta Road Undercrossing to Loveridge Road Overcrossing.
Contractor Name: O.C. Jones & Sons, Inc. (Victor Babbitt)
Contractor Address: 1520 Fourth Street, Berkeley, CA 94710
Resident Engineer: Rabi Mukherjee Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2025-04-17-109
TL Number from the TL Form: CON-041725-3
Sample Submitted By Organization: BSK Associates
Sample Organization Contact: (925) 765-9483
Type of Sample: Production Start-Up
Type of Material: Aggregate
Sample Taken Date: 04/17/2025
Date that the sample was received by the laboratory/organization performing the testing: 04/24/2025
The quantity of what the sample constitutes: 2 Bags Agg
A brief description of the sample: 3/4" HMA-25%RAP+3%RAS
From where was the sample collected: Manufacturer
Laboratory sample identification: D04-SE-25-012
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Granite Construction - Pleasanton

Material Information

Source Identification (SMARA, name of Pit or Job Site): 91-01-0009
The fabricator's/manufacturer's product name for the sample:
The fabricator/manufacturer designation for the sample:
The plant number:
A detailed description of where the material sample was collected: Conveyor Belt at Plant
Where the material sample would have been placed if not sampled:
Primary Aggregate Nominal Size: 3/4 inch
The concrete mix design number:
Lot number:
Sublot number:
Aggregate Mix Number: 14790

Test Results

Test 1 of 4

DIME Test ID: 2025-04-17-109-1
Test Method: AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)
Submitted By Organization: BSK Associates
Organization Address: 399 Lindbergh Avenue,
Organization City: Livermore
Organization State: CA
Organization Zipcode: 94551
Organization Email: cmelo@bskassociates.com
Organization Phone: (925) 765-9483
Data has not been verified.

Test 2 of 4

DIME Test ID: 2025-04-17-109-2
Test Method: AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)
Submitted By Organization: BSK Associates
Organization Address: 399 Lindbergh Avenue,
Organization City: Livermore
Organization State: CA
Organization Zipcode: 94551
Organization Email: cmelo@bskassociates.com
Organization Phone: (925) 765-9483
Data has not been verified.

Test 3 of 4

DIME Test ID: 2025-04-17-109-3
Test Method: AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)
Submitted By Organization: BSK Associates
Organization Address: 399 Lindbergh Avenue,
Organization City: Livermore
Organization State: CA
Organization Zipcode: 94551
Organization Email: cmelo@bskassociates.com
Organization Phone: (925) 765-9483
Data has not been verified.

Test 4 of 4

DIME Test ID: 2025-04-17-109-4
Test Method: ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)
Submitted By Organization: BSK Associates
Organization Address: 399 Lindbergh Avenue,
Organization City: Livermore
Organization State: CA
Organization Zipcode: 94551
Organization Email: cmelo@bskassociates.com
Organization Phone: (925) 765-9483
Data has not been verified.