Sample Record for 2025-09-23-37
Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project Information
Project ID: 995026 DEA: 040Q1004 EFIS: 0418000044
QA Service Level: 1
DIST-CO-RTE-PM: 04-ALA-580-20.7/30.8
Work Description: REHAB ALA 580
Location Description: ALAMEDA COUNTY IN PLEASANTON AND CASTRO VALLEY FROM ROUTE 680/580 SEPARATION TO ROUTE 580/238 SEPARATION
Contractor Name: FBD VANGUARD CONSTRUCTION, INC.
Contractor Address: 550 Greenville Road, Livermore, CA 94550
Resident Engineer: Paramjit Pandher Structure Rep.: John Parecadan
Sample Information
DIME Sample ID: 2025-09-23-37
TL Number from the TL Form: C772476
Sample Submitted By Organization: CT D04 - Pleasanton Field Laboratory
Sample Organization Contact: (510) 224-6127
Type of Sample: Quality Assurance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 09/23/2025
Date that the sample was received by the laboratory/organization performing the testing: 09/24/2025
The quantity of what the sample constitutes: 750 Tons
A brief description of the sample: 1/2"RHMA-G
From where was the sample collected: Job Site
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Vulcan Pleasanton
Material Information
HMA Type: RHMA-G
HMA Grading: 1/2 inch
Lot number: 2
Sublot number: 4
HMA Mix Number: 326122
Binder content (%): 7.5
Virgin binder PG: PG 64-16
Design binder PG: PG 64-16
Binder Supplier:
RAP content (%):
WMA Additives: Yes
Antistrip type:
Test Results
Test 1 of 9
DIME Test ID: 2025-09-23-37-1
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 09/25/2025
Date Tested: 09/25/2025
Submitted By Organization: CT D04 - Pleasanton Field Laboratory
Organization Address: 5675 B Gibratar Drive,
Organization City: Pleasanton
Organization State: CA
Organization Zipcode: 94588
Organization Email: dennis.yeung@dot.ca.gov
Organization Phone: (510) 224-6127
General Comments for this Test: Lot 2 SL. 4
Test Result Compliance: complies
Additional Comments When Verified:
|
What temperature unit is used?
|
Celsius
|
|
Test procedure used?
|
Method A
|
|
Mass of the specimen basket assembly
|
3562.8 g
|
|
Mass of the specimen and specimen basket assembly prior to ignition
|
5117.1 g
|
|
Mass of HMA Sample prior to ignition
|
1554.3 g
|
|
Corrected Asphalt Binder Content
|
7.42 %
|
|
Mass Loss
|
122.9 g
|
|
Mass of aggregate remaining after ignition
|
1431.4 g
|
|
Correction Factor (Percent by mass of HMA Specimen)
|
0.3 %
|
|
Moisture Content
|
no data0 %
|
|
Temperature Compensation Factor
|
0.19 %
|
|
Test Temperature
|
482 C
|
Test 2 of 9
DIME Test ID: 2025-09-23-37-2
Test Method: AASHTO T209-22: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 09/25/2025
Date Tested: 09/25/2025
Submitted By Organization: CT D04 - Pleasanton Field Laboratory
Organization Address: 5675 B Gibratar Drive,
Organization City: Pleasanton
Organization State: CA
Organization Zipcode: 94588
Organization Email: dennis.yeung@dot.ca.gov
Organization Phone: (510) 224-6127
General Comments for this Test: Lot 2 SL. 4
Test Result Compliance: not applicable
Additional Comments When Verified:
|
Number of Samples
|
1
|
|
What is the unit of measurement for theoretical density?
|
SI Units
|
|
Mass Determination
|
Air
|
|
Method Performed
|
Mechanical Agitation - Method A
|
|
Mass of container filled with water 1
|
7334.5 grams
|
|
Mass of oven-dry sample in air for Sample 1
|
1528.2 grams
|
|
Mass of container filled with the sample and water for Sample 1
|
8234.6 grams
|
|
Temperature of Water
|
77 °F
|
|
Specific Gravity for Sample 1
|
2.433
|
|
Theoretical maximum density at 25°C (77°F)
|
2426 kg/m^3
|
Test 3 of 9
DIME Test ID: 2025-09-23-37-3
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Verified Date: 09/25/2025
Date Tested: 09/25/2025
Submitted By Organization: CT D04 - Pleasanton Field Laboratory
Organization Address: 5675 B Gibratar Drive,
Organization City: Pleasanton
Organization State: CA
Organization Zipcode: 94588
Organization Email: dennis.yeung@dot.ca.gov
Organization Phone: (510) 224-6127
General Comments for this Test: Lot 2 SL. 4
Test Result Compliance: not applicable
Additional Comments When Verified:
|
Bulk Specific Gravity
|
2.27
|
|
Bulk Specific Gravity 2
|
2.221
|
|
Bulk Specific Gravity 3
|
2.232
|
|
Average Bulk Specific Gravity
|
2.241
|
Test 4 of 9
DIME Test ID: 2025-09-23-37-4
Test Method: AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)
Verified Date: 09/25/2025
Date Tested: 09/25/2025
Submitted By Organization: CT D04 - Pleasanton Field Laboratory
Organization Address: 5675 B Gibratar Drive,
Organization City: Pleasanton
Organization State: CA
Organization Zipcode: 94588
Organization Email: dennis.yeung@dot.ca.gov
Organization Phone: (510) 224-6127
General Comments for this Test: Lot 2 SL. 4
Test Result Compliance: complies
Additional Comments When Verified:
|
Percent Air Voids
|
6.7 %
|
|
Percent Air Voids 2
|
8.7 %
|
|
Percent Air Voids 3
|
8.3 %
|
|
Average Percent Air Voids
|
7.9 %
|
|
Average Core Density
|
92.1 %
|
Test 5 of 9
DIME Test ID: 2025-09-23-37-5
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Submitted By Organization: CT D04 - Pleasanton Field Laboratory
Organization Address: 5675 Gibraltar Drive,
Organization City: Pleasanton
Organization State: CA
Organization Zipcode: 94588
Organization Email: dennis.yeung@dot.ca.gov
Organization Phone: (510) 224-6127
This test has been superseded on 09/29/2025. The corrected test ID is: 2025-09-23-37-8
Reason: corrected
Test 6 of 9
DIME Test ID: 2025-09-23-37-6
Test Method: AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)
Submitted By Organization: CT D04 - Pleasanton Field Laboratory
Organization Address: 5675 Gibraltar Drive,
Organization City: Pleasanton
Organization State: CA
Organization Zipcode: 94588
Organization Email: dennis.yeung@dot.ca.gov
Organization Phone: (510) 224-6127
This test has been superseded on 09/29/2025. The corrected test ID is: 2025-09-23-37-9
Reason: corrected
Test 7 of 9
DIME Test ID: 2025-09-23-37-7
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 09/25/2025
Date Tested: 09/25/2025
Submitted By Organization: CT D04 - Pleasanton Field Laboratory
Organization Address: 5675 B Gibratar Drive,
Organization City: Pleasanton
Organization State: CA
Organization Zipcode: 94588
Organization Email: dennis.yeung@dot.ca.gov
Organization Phone: (510) 224-6127
General Comments for this Test: Lot 2 SL. 5
Test Result Compliance: complies
Additional Comments When Verified:
|
What temperature unit is used?
|
Celsius
|
|
Test procedure used?
|
Method A
|
|
Mass of the specimen basket assembly
|
2904.4 g
|
|
Mass of the specimen and specimen basket assembly prior to ignition
|
4504.4 g
|
|
Mass of HMA Sample prior to ignition
|
1600 g
|
|
Corrected Asphalt Binder Content
|
7.55 %
|
|
Mass Loss
|
128.7 g
|
|
Mass of aggregate remaining after ignition
|
1471.3 g
|
|
Correction Factor (Percent by mass of HMA Specimen)
|
0.3 %
|
|
Moisture Content
|
no data0 %
|
|
Temperature Compensation Factor
|
0.19 %
|
|
Test Temperature
|
482 C
|
Test 8 of 9
DIME Test ID: 2025-09-23-37-8
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Verified Date: 09/29/2025
Date Tested: 09/29/2025
Submitted By Organization: CT D04 - Pleasanton Field Laboratory
Organization Address: 5675 B Gibratar Drive,
Organization City: Pleasanton
Organization State: CA
Organization Zipcode: 94588
Organization Email: dennis.yeung@dot.ca.gov
Organization Phone: (510) 224-6127
General Comments for this Test: Lot 2 SL. 5
The test was superseded from test ID: 2025-09-23-37-5
Test Result Compliance: not applicable
Additional Comments When Verified:
|
Bulk Specific Gravity
|
2.236
|
|
Bulk Specific Gravity 2
|
2.242
|
|
Average Bulk Specific Gravity
|
2.239
|
Test 9 of 9
DIME Test ID: 2025-09-23-37-9
Test Method: AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)
Verified Date: 09/29/2025
Date Tested: 09/29/2025
Submitted By Organization: CT D04 - Pleasanton Field Laboratory
Organization Address: 5675 B Gibratar Drive,
Organization City: Pleasanton
Organization State: CA
Organization Zipcode: 94588
Organization Email: dennis.yeung@dot.ca.gov
Organization Phone: (510) 224-6127
General Comments for this Test: Lot 2 SL. 5
The test was superseded from test ID: 2025-09-23-37-6
Test Result Compliance: complies
Additional Comments When Verified:
|
Percent Air Voids
|
7.9 %
|
|
Percent Air Voids 2
|
8.1 %
|
|
Average Percent Air Voids
|
8 %
|
|
Average Core Density
|
92 %
|
