Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 1001312 DEA: 11432844 EFIS: 1125000219 COOP: NONE
QA Service Level: 1
DIST-CO-RTE-PM: 11---unknown
Work Description:
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Carlos Lopez Structure Rep.: Unknown
DIME Sample ID: 2025-08-15-60
TL Number from the TL Form:
Sample Submitted By Organization: CT D11 - District 11 Materials Laboratory
Sample Organization Contact: (858) 518-8709
Type of Sample: Per Request
Type of Material: Hot Mix Asphalt
Sample Taken Date: 08/15/2025
Date that the sample was received by the laboratory/organization performing the testing: 08/21/2025
The quantity of what the sample constitutes: 4 Boxes
A brief description of the sample: Plant Sample
From where was the sample collected: Supplier
Laboratory sample identification: 25-08-15-60-A
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Vulcan Otay
HMA Type: Type A HMA
HMA Grading: 1-1/2 inch
Lot number:
Sublot number:
HMA Mix Number: 820801 Otay Val
Binder content (%): 3.9
Virgin binder PG: PG 70-10
Design binder PG: PG 70-10
Binder Supplier: Valero
RAP content (%): 22
WMA Additives: No
Antistrip type:
DIME Test ID: 2025-08-15-60-1
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 09/23/2025
Date Tested: 09/22/2025
Submitted By Organization: CT D11 - District 11 Materials Laboratory
Organization Address: 4050 Taylor Street,
Organization City: San Diego
Organization State: CA
Organization Zipcode: 92110
Organization Email: benjamin.haney@dot.ca.gov
Organization Phone: (858) 688-1595
General Comments for this Test: Target 3.9%
Complies
Test Result Compliance: complies
Additional Comments When Verified:
|
What temperature unit is used?
|
Celsius
|
|
Test procedure used?
|
Method A
|
|
Mass of the specimen basket assembly
|
3996.8 g
|
|
Mass of the specimen and specimen basket assembly prior to ignition
|
8017.9 g
|
|
Mass of HMA Sample prior to ignition
|
4021.1 g
|
|
Corrected Asphalt Binder Content
|
4.32 %
|
|
Mass Loss
|
183.8 g
|
|
Mass of aggregate remaining after ignition
|
3837.3 g
|
|
Correction Factor (Percent by mass of HMA Specimen)
|
0.25 %
|
|
Moisture Content
|
no data0 %
|
|
Temperature Compensation Factor
|
no data0 %
|
|
Test Temperature
|
538 C
|
DIME Test ID: 2025-08-15-60-2
Test Method: AASHTO T209-22: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 09/23/2025
Date Tested: 09/22/2025
Submitted By Organization: CT D11 - District 11 Materials Laboratory
Organization Address: 4050 Taylor Street,
Organization City: San Diego
Organization State: CA
Organization Zipcode: 92110
Organization Email: benjamin.haney@dot.ca.gov
Organization Phone: (858) 688-1595
General Comments for this Test: Target - 2.552
Complies
Test Result Compliance: complies
Additional Comments When Verified:
|
Number of Samples
|
1
|
|
What is the unit of measurement for theoretical density?
|
US Units
|
|
Mass Determination
|
Air
|
|
Method Performed
|
Mechanical Agitation - Method A
|
|
Mass of container filled with water 1
|
10199 grams
|
|
Mass of oven-dry sample in air for Sample 1
|
4016.7 grams
|
|
Mass of container filled with the sample and water for Sample 1
|
12630.3 grams
|
|
Temperature of Water
|
77 °F
|
|
Specific Gravity for Sample 1
|
2.534
|
|
Theoretical maximum density at 25°C (77°F)
|
157.7 lb/ft^3
|
DIME Test ID: 2025-08-15-60-3
Test Method: CTM 375-February 2012: Determining the Density and Relative Compaction of Data Cores (lab)
Verified Date: 12/11/2025
Date Tested: 12/05/2025
Submitted By Organization: CT D11 - District 11 Materials Laboratory
Organization Address: 4050 Taylor Street,
Organization City: San Diego
Organization State: CA
Organization Zipcode: 92110
Organization Email: benjamin.haney@dot.ca.gov
Organization Phone: (858) 688-1595
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
|
Number of Cores
|
3
|
|
Core 1 ID
|
50 A
|
|
Dry Weight 1
|
1808.4 grams
|
|
Parrafin Coated Weight 1
|
1831.4 grams
|
|
Coated Weight in Water 1
|
1048.1 grams
|
|
Theoretical Maximum Density
|
2.534
|
|
Core 2 ID
|
46 B
|
|
Dry Weight 2
|
1760.3 grams
|
|
Parrafin Coated Weight 2
|
1790.6 grams
|
|
Coated Weight in Water 2
|
1013.6 grams
|
|
Core 3 ID
|
46 C
|
|
Dry Weight 3
|
1669.7 grams
|
|
Parrafin Coated Weight 3
|
1694.8 grams
|
|
Coated Weight in Water 3
|
968.3 grams
|
|
Sublot Relative Compaction
|
94 %
|
DIME Test ID: 2025-08-15-60-4
Test Method: CTM 375-February 2012: Determining the Density and Relative Compaction of Data Cores (lab)
Verified Date: 12/11/2025
Date Tested: 12/05/2025
Submitted By Organization: CT D11 - District 11 Materials Laboratory
Organization Address: 4050 Taylor Street,
Organization City: San Diego
Organization State: CA
Organization Zipcode: 92110
Organization Email: benjamin.haney@dot.ca.gov
Organization Phone: (858) 688-1595
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
|
Number of Cores
|
3
|
|
Core 1 ID
|
47 A
|
|
Dry Weight 1
|
1794 grams
|
|
Parrafin Coated Weight 1
|
1822 grams
|
|
Coated Weight in Water 1
|
1038.5 grams
|
|
Theoretical Maximum Density
|
2.534
|
|
Core 2 ID
|
47 B
|
|
Dry Weight 2
|
1943.9 grams
|
|
Parrafin Coated Weight 2
|
1970.6 grams
|
|
Coated Weight in Water 2
|
1130 grams
|
|
Core 3 ID
|
47 C
|
|
Dry Weight 3
|
1966.1 grams
|
|
Parrafin Coated Weight 3
|
1994.1 grams
|
|
Coated Weight in Water 3
|
1137.4 grams
|
|
Sublot Relative Compaction
|
94.2 %
|
DIME Test ID: 2025-08-15-60-5
Test Method: CTM 375-February 2012: Determining the Density and Relative Compaction of Data Cores (lab)
Verified Date: 12/11/2025
Date Tested: 12/05/2025
Submitted By Organization: CT D11 - District 11 Materials Laboratory
Organization Address: 4050 Taylor Street,
Organization City: San Diego
Organization State: CA
Organization Zipcode: 92110
Organization Email: benjamin.haney@dot.ca.gov
Organization Phone: (858) 688-1595
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
|
Number of Cores
|
3
|
|
Core 1 ID
|
48 A
|
|
Dry Weight 1
|
1629.9 grams
|
|
Parrafin Coated Weight 1
|
1655.3 grams
|
|
Coated Weight in Water 1
|
943.5 grams
|
|
Theoretical Maximum Density
|
2.534
|
|
Core 2 ID
|
48 B
|
|
Dry Weight 2
|
1781.2 grams
|
|
Parrafin Coated Weight 2
|
1809 grams
|
|
Coated Weight in Water 2
|
1024.4 grams
|
|
Core 3 ID
|
48 C
|
|
Dry Weight 3
|
1644.3 grams
|
|
Parrafin Coated Weight 3
|
1671 grams
|
|
Coated Weight in Water 3
|
946.8 grams
|
|
Sublot Relative Compaction
|
93.6 %
|
DIME Test ID: 2025-08-15-60-6
Test Method: CTM 375-February 2012: Determining the Density and Relative Compaction of Data Cores (lab)
Verified Date: 12/11/2025
Date Tested: 12/09/2025
Submitted By Organization: CT D11 - District 11 Materials Laboratory
Organization Address: 4050 Taylor Street,
Organization City: San Diego
Organization State: CA
Organization Zipcode: 92110
Organization Email: benjamin.haney@dot.ca.gov
Organization Phone: (858) 688-1595
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
|
Number of Cores
|
3
|
|
Core 1 ID
|
49 A
|
|
Dry Weight 1
|
1622.7 grams
|
|
Parrafin Coated Weight 1
|
1648.1 grams
|
|
Coated Weight in Water 1
|
941.2 grams
|
|
Theoretical Maximum Density
|
2.534
|
|
Core 2 ID
|
49 B
|
|
Dry Weight 2
|
1786.4 grams
|
|
Parrafin Coated Weight 2
|
1813.8 grams
|
|
Coated Weight in Water 2
|
1034.8 grams
|
|
Core 3 ID
|
49 C
|
|
Dry Weight 3
|
1672.4 grams
|
|
Parrafin Coated Weight 3
|
1698.3 grams
|
|
Coated Weight in Water 3
|
969.1 grams
|
|
Sublot Relative Compaction
|
94.3 %
|
