Print Report | Back to Sample Detail

Sample Record for 2025-08-14-113

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 995229 DEA: 07355404 EFIS: 0719000010 QA Service Level: 1
DIST-CO-RTE-PM: 07-LA-2,210-15.0/57.5,R18.7/R19.4
Work Description: REPLACE AND INSTALL DRAINAGE SYSTEM, AND PERFORM SLOPE PAVING.
Location Description: LOS ANGELES COUNTY ON ROUTE 2 FROM 1.0 MILE NORTH OF CLIFFORD STREET TO MOUNT WATERMAN SKI LIFTS AND ON ROUTE 210 FROM 0.5 MILE EAST OF OCEAN VIEW BOULVEARD OVERCROSSING TO 0.2 MILE EAST OF ALTA CANYADA ROAD OVERCROSSING
Contractor Name: CHUMO CONSTRUCTION INC.
Contractor Address: Unknown
Resident Engineer: Bill Tran Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2025-08-14-113
TL Number from the TL Form:
Sample Submitted By Organization: Alta Vista Solutions - Whittier
Sample Organization Contact: (510) 542-9827
Type of Sample: Quality Assurance
Type of Material: Aggregate
Sample Taken Date: 08/14/2025
Date that the sample was received by the laboratory/organization performing the testing: 08/14/2025
The quantity of what the sample constitutes: 1,193 SY
A brief description of the sample: Class 3 Aggregate Base
From where was the sample collected: Job Site
Laboratory sample identification: 25-2711
Structure unique identifier:
Structure name: Gore 11 NB 2 FWY
The fabricator/manufacturer/facility name: n/a

Material Information

Source Identification (SMARA, name of Pit or Job Site): n/a
The fabricator's/manufacturer's product name for the sample: Class 3 Aggregate Base
The fabricator/manufacturer designation for the sample: Compactions Testing
The plant number:
A detailed description of where the material sample was collected: jobsite
Where the material sample would have been placed if not sampled: jobsite
Primary Aggregate Nominal Size: 3/4 inch
The concrete mix design number:
Lot number:
Sublot number:
Aggregate Mix Number:

Test Results

Test 1 of 2

DIME Test ID: 2025-08-14-113-1
Test Method: CTM 231-March 2013: Method of Test for Relative Compaction of Untreated and Treated Soils and Aggregates Using Nuclear Gages
Verified Date: 09/17/2025
Date Tested: 08/14/2025
Submitted By Organization: Alta Vista Solutions - Whittier
Organization Address: 12409 Slauson Avenue, Suite I,
Organization City: Whittier
Organization State: CA
Organization Zipcode: 90606
Organization Email: nicholas.hoffmann@oneatlas.com
Organization Phone: (510) 542-9827
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Standard Count Density 1484 g/cc
Count or Density 1 1488 g/cc
Count or Density 2 1522 g/cc
Count or Density 3 1496 g/cc
Count or Density 4 1525 g/cc
Count or Density 5 1511 g/cc
Standard Count Moisture 632 g/cc
Moisture Count 1 123 g/cc
Moisture Count 2 125 g/cc
Moisture Count 3 154 g/cc
Moisture Count 4 123 g/cc
Moisture Count 5 115 g/cc
Sum of Count or Density 7542 g/cc
Average of Count or Density 1508.4 g/cc
Sum of Moisture Count 640 g/cc
Average of Moisture Count 128 g/cc
Calculated Percent Relative Compaction 97.2 %
Reported Percent Relative Compaction 97 %

Test 2 of 2

DIME Test ID: 2025-08-14-113-2
Test Method: CTM 216-June 2011: Method of Test for Relative Compaction of Untreated and Treated Soils and Aggregates
Verified Date: 09/17/2025
Date Tested: 08/14/2025
Submitted By Organization: Alta Vista Solutions - Whittier
Organization Address: 12409 Slauson Avenue, Suite I,
Organization City: Whittier
Organization State: CA
Organization Zipcode: 90606
Organization Email: nicholas.hoffmann@oneatlas.com
Organization Phone: (510) 542-9827
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Is oversize material No
In-place wet density 2.08
Highest adjust wet density 2.14
Relative compaction 97
% Moisture 8.3 %
Optimum Moisture 10.3 %