Print Report | Back to Sample Detail

Sample Record for 2025-09-08-31

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 1000611 DEA: 120R32U4 EFIS: 1222000054 QA Service Level: 1
DIST-CO-RTE-PM: 12-ORA-55-0.2/R17.8
Work Description: COLD PLANE, PLACE RHMA, REPLACE CB, SIGNS AND MODIFY LIGHTING SYSTEM.
Location Description: ORANGE COUNTY FROM 0.1 MILE SOUTH OF ROUTE 55/1 SEPARATION IN NEWPORT BEACH TO ROUTE 55/91 SEPARATION IN ANAHEIM
Contractor Name: R.J. NOBLE COMPANY
Contractor Address: 15505 East Lincoln Avenue, Orange, CA 92865
Resident Engineer: Tyrone Taylor Structure Rep.: Matthew Chang

Sample Information

DIME Sample ID: 2025-09-08-31
TL Number from the TL Form:
Sample Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Sample Organization Contact: 213-792-4794
Type of Sample: Verification
Type of Material: Aggregate
Sample Taken Date: 09/08/2025
Date that the sample was received by the laboratory/organization performing the testing: 09/12/2025
The quantity of what the sample constitutes: 4 Bags Combined Aggregate, 2 Bags Combined RAP
A brief description of the sample: JMF Verification, 1/2" HMA-A-SP R25 0.25% Evo
From where was the sample collected: Manufacturer
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: RJ Noble - Orange

Material Information

Source Identification (SMARA, name of Pit or Job Site): 91-330035
The fabricator's/manufacturer's product name for the sample:
The fabricator/manufacturer designation for the sample:
The plant number:
A detailed description of where the material sample was collected: Belt cut, RJ Noble - Orange
Where the material sample would have been placed if not sampled:
Primary Aggregate Nominal Size: 1/2 inch
The concrete mix design number: 40R2508SPWEO
Lot number:
Sublot number:
Aggregate Mix Number:

Test Results

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
2025-09-08-31-1AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)09/15/2025Not scheduledJulius EsonwuneCT D08 - Fontana Southern Regional Laboratory
2025-09-08-31-2AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)09/15/2025Not scheduledJulius EsonwuneCT D08 - Fontana Southern Regional Laboratory
2025-09-08-31-3AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)09/15/2025Not scheduledJulius EsonwuneCT D08 - Fontana Southern Regional Laboratory
2025-09-08-31-4AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)09/15/2025Not scheduledJulius EsonwuneCT D08 - Fontana Southern Regional Laboratory
2025-09-08-31-5AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)09/15/2025Not scheduledJulius EsonwuneCT D08 - Fontana Southern Regional Laboratory
2025-09-08-31-6AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)09/15/2025Not scheduledJulius EsonwuneCT D08 - Fontana Southern Regional Laboratory
2025-09-08-31-7AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)09/15/2025Not scheduledJulius EsonwuneCT D08 - Fontana Southern Regional Laboratory
2025-09-08-31-8ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)09/15/2025Not scheduledJulius EsonwuneCT D08 - Fontana Southern Regional Laboratory
2025-09-08-31-9CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates09/15/2025Not scheduledJulius EsonwuneCT D08 - Fontana Southern Regional Laboratory
2025-09-08-31-10CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates09/15/2025Not scheduledJulius EsonwuneCT D08 - Fontana Southern Regional Laboratory