Print Report | Back to Sample Detail

Sample Record for 2025-09-10-23

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 1000606 DEA: 081J3004 EFIS: 0818000016 QA Service Level: 1
DIST-CO-RTE-PM: 08-SBD-18-90.9/R96.6
Work Description: HMA (TYPE A), MOD SIGNAL & LTG SYSTEMS, & COLD PLANE AC PVMT.
Location Description: SAN BERNARDINO COUNTY IN AND NEAR VICTORVILLE FROM APPLE VALLEY INN ROAD TO ROUTE 15/18 SEPARATION
Contractor Name: SULLY-MILLER CONTRACTING COMPANY
Contractor Address: 135 S STATE COLLEGE BLVD #400, BREA CA 92821
Resident Engineer: Alfonso Gonzalez Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2025-09-10-23
TL Number from the TL Form:
Sample Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Sample Organization Contact: 213-792-4794
Type of Sample: Acceptance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 09/10/2025
Date that the sample was received by the laboratory/organization performing the testing: 09/11/2025
The quantity of what the sample constitutes: 4 BOXES OF HMA, 1 QT PG64-16
A brief description of the sample: 3/4" HMA A R25 .6% EVO
From where was the sample collected: Manufacturer
Laboratory sample identification: 0555A-25
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Blue Diamond-Victorville

Material Information

HMA Type: Type A HMA
HMA Grading: 3/4 inch
Lot number:
Sublot number:
HMA Mix Number: 300154 R25
Binder content (%): 0.0
Virgin binder PG:
Design binder PG:
Binder Supplier:
RAP content (%):
WMA Additives:
Antistrip type:

Test Results

Test 1 of 1

DIME Test ID: 2025-09-10-23-1
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 09/30/2025
Date Tested: 09/12/2025
Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: (909) 829-3029
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
What temperature unit is used? Celsius
Test procedure used? Method A
Mass of HMA Sample prior to ignition 2157 g
Corrected Asphalt Binder Content 4.64 %
Mass Loss 117.4 g
Correction Factor (Percent by mass of HMA Specimen) 0.67 %
Moisture Content no data0 %
Temperature Compensation Factor 0.13 %
Test Temperature 538 C