Project Information

Project ID: 1001145 DEA: 033G4004 EFIS: 0324000124 QA Service Level: 1

DIST-CO-RTE-PM: 03-YOL-16-9.9/15

Work Description: PARTIAL DEPTH RECYCLING, AND RHMA-G.

Location Description: YOLO COUNTY AT AND NEAR GUINDA FROM 0.2 MILE EAST OF COUNTY ROAD 43 EAST INTERSECTION TO 0.1 MILE WEST OF COUNTY ROAD 68

Contractor Name: ALL-AMERICAN CONSTRUCTION, INC.

Contractor Address: Unknown

Resident Engineer: Luis Pompa Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2025-09-02-81

TL Number from the TL Form: C766480

Sample Submitted By Organization: CT D03 - Olivehurst Northern Regional Laboratory

Sample Organization Contact: (530) 741-4238

Type of Sample: Quality Assurance

Type of Material: Hot Mix Asphalt

Sample Taken Date: 09/02/2025

Date that the sample was received by the laboratory/organization performing the testing: 09/08/2025

The quantity of what the sample constitutes: 2 Boxes

A brief description of the sample: 1/2" RHMA-G

From where was the sample collected: Source

Laboratory sample identification: Daily 25-171

Structure unique identifier:

Structure name:

The fabricator/manufacturer/facility name: Teichert Woodland

Material Information

HMA Type: RHMA-G

HMA Grading: 1/2 inch

Lot number: 1

Sublot number: 9

HMA Mix Number: 30640542500V

Binder content (%): 7.5

Virgin binder PG: PG 64-16

Design binder PG: PG 64-16

Binder Supplier: Valero

RAP content (%): 0

WMA Additives: No

Antistrip type:

Test Results

Test 1 of 2

DIME Test ID: 2025-09-02-81-1

Test Method: AASHTO T209-22: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)

Verified Date: 09/11/2025

Date Tested: 09/10/2025

Submitted By Organization: CT D03 - Olivehurst Northern Regional Laboratory

Organization Address: 5330 Arboga Road,

Organization City: Olivehurst

Organization State: CA

Organization Zipcode: 95961

Organization Email: jeff.herbert@dot.ca.gov

Organization Phone: (530) 741-4238

General Comments for this Test:

Test Result Compliance: not applicable

Additional Comments When Verified:

Number of Samples	1
What is the unit of measurement for theoretical density?	SI Units
Mass Determination	Air
Specific Gravity for Sample 1	2.439
Theoretical maximum density at 25°C (77°F)	2 kg/m^3

Test 2 of 2

DIME Test ID: 2025-09-02-81-2

Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)