Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 215734 DEA: 024H0104 EFIS: 0218000068
QA Service Level: 1
DIST-CO-RTE-PM: 02-PLU-70-78.3/90.3
Work Description: REPLACE AC SURFACING, PLACE HMA AND THERMOPLASTIC TRAFFIC STRIPING.
Location Description: PLUMAS COUNTY NEAR PORTOLA FROM 0.4 MILE WEST OF BIG GRIZZLY CREEK BRIDGE TO 0.8 MILE WEST OF SUMMIT SCHOOL DRIVE
Contractor Name: HAT CREEK CONSTRUCTION & MATERIALS, INC.
Contractor Address: 243339 Hwy 89, N Burney, CA 96013
Resident Engineer: Mike Zdenek Structure Rep.: Unknown
DIME Sample ID: 2025-08-25-95
TL Number from the TL Form: 875177
Sample Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Sample Organization Contact: (530) 225-3194
Type of Sample: Acceptance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 08/25/2025
Date that the sample was received by the laboratory/organization performing the testing: 09/02/2025
The quantity of what the sample constitutes: 227
A brief description of the sample: 1 Box of Lime Treated 1/2-inch HMA-A, w/ 25% RAP, PG 58-22 Albina (K-Falls)
From where was the sample collected: Manufacturer
Laboratory sample identification: D80023
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Hat Creek Construction and Materials - Ward Lake Plant (Litchfield, CA)
HMA Type: Type A HMA
HMA Grading: 1/2 inch
Lot number:
Sublot number:
HMA Mix Number:
Binder content (%): 6.2
Virgin binder PG: PG 58-22
Design binder PG: PG 64-16
Binder Supplier: Albina (Klamath Falls, OR)
RAP content (%): 25
WMA Additives: No
Antistrip type: Lime
DIME Test ID: 2025-08-25-95-1
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 09/10/2025
Date Tested: 09/04/2025
Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Organization Address: 1657 Riverside Drive,
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: 530-225-3194
General Comments for this Test: Pb=5.82%
Test Result Compliance: does not comply
Additional Comments When Verified:
|
What temperature unit is used?
|
Celsius
|
|
Test procedure used?
|
Method A
|
|
Mass of the specimen basket assembly
|
3040.8 g
|
|
Mass of the specimen and specimen basket assembly prior to ignition
|
4838.7 g
|
|
Mass of HMA Sample prior to ignition
|
1797.9 g
|
|
Corrected Asphalt Binder Content
|
5.81 %
|
|
Mass Loss
|
123.2 g
|
|
Mass of aggregate remaining after ignition
|
1674.7 g
|
|
Correction Factor (Percent by mass of HMA Specimen)
|
0.87 %
|
|
Moisture Content
|
no data0 %
|
|
Temperature Compensation Factor
|
0.17 %
|
|
Test Temperature
|
538 C
|
