Print Report | Back to Sample Detail

Sample Record for 2025-09-05-38

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 1001124 DEA: 070W9704 EFIS: 0723000187 QA Service Level: 1
DIST-CO-RTE-PM: 07-LA-10,60,71-Var
Work Description: METHACRYLATE, POLYESTER OVERLAY, JOINT SEAL REPAIR, AND SPALL REPAIR.
Location Description: LOS ANGELES COUNTY AT VARIOUS LOCATIONS
Contractor Name: J. FRANCIS COMPANY
Contractor Address: Unknown
Resident Engineer: Hai Hong Structure Rep.: John-HC Lee

Sample Information

DIME Sample ID: 2025-09-05-38
TL Number from the TL Form: 181 KBP
Sample Submitted By Organization: Kwik Bond Polymers
Sample Organization Contact: (760) 518-6064
Type of Sample: Quality Control
Type of Material: Polyester
Sample Taken Date: 09/05/2025
Date that the sample was received by the laboratory/organization performing the testing: 09/08/2025
The quantity of what the sample constitutes: 17 totes
A brief description of the sample: 1 gallon can / PPC 1121 RESIN
From where was the sample collected: Source
Laboratory sample identification: 25-144
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Kwik Bond Polymers, Benicia

Material Information

Mfg. Lot Number(s): ET5I01450
Batch number: ET5I01450
Mix number: ET5I0450
Test results on following page(s): 6

Test Results

Test 1 of 6

DIME Test ID: 2025-09-05-38-1
Test Method: ASTM D2196-Feb15: Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational Viscometer
Verified Date: 09/19/2025
Date Tested: 09/10/2025
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joe.harline@dot.ca.gov
Organization Phone: (916) 206-4373
General Comments for this Test: Accepted supplier's result.
Test Result Compliance: complies
Additional Comments When Verified:
Viscosity 102.5

Test 2 of 6

DIME Test ID: 2025-09-05-38-2
Test Method: ASTM D1475-Nov13: Standard Test Method For Density of Liquid Coatings, Inks, and Related Products
Verified Date: 09/19/2025
Date Tested: 09/10/2025
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joe.harline@dot.ca.gov
Organization Phone: (916) 206-4373
General Comments for this Test: Accepted supplier's result.
Test Result Compliance: complies
Additional Comments When Verified:
Density Units pounds/gallons
Liquid Density (pounds per gallon) 8.8

Test 3 of 6

DIME Test ID: 2025-09-05-38-3
Test Method: ASTM D2369-Jul10: Standard Test Method for Volatile Content of Coatings
Verified Date: 09/19/2025
Date Tested: 09/10/2025
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joe.harline@dot.ca.gov
Organization Phone: (916) 206-4373
General Comments for this Test: Accepted supplier's result.
Test Result Compliance: complies
Additional Comments When Verified:
Mean of two volatile content determination 46.4

Test 4 of 6

DIME Test ID: 2025-09-05-38-4
Test Method: ASTM D638-Dec14: Standard Test Method for Tensile Properties of Plastics
Verified Date: 09/19/2025
Date Tested: 09/10/2025
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joe.harline@dot.ca.gov
Organization Phone: (916) 206-4373
General Comments for this Test: Accepted supplier's result.
Test Result Compliance: complies
Additional Comments When Verified:
Number of specimens tested 6
Conditioning procedure 18/25/50+5/70
Speed of testing 0.45 in/min
Sample 1 Width 0.485 in
Sample 1 Ultimate strength 3203.6 psi
Sample 1 Thickness 0.249 in
Sample 1 Area 0.1208 in^2
Sample 1 Ultimate Strength Actual 387 lbs
Sample 1 percent elongation 79.8 %
Sample 1 Time no data0 MM:SS
Sample 2 Width 0.484 in
Sample 2 Thickness 0.254 in
Sample 2 Area 0.1229 in^2
Sample 2 Ultimate strength 2685.1 psi
Sample 2 Ultimate Strength Actual 330 lbs
Sample 2 percent elongation 65.1 %
Sample 2 Time no data0 MM:SS
Sample 3 Width 0.485 in
Sample 3 Thickness 0.25 in
Sample 3 Area 0.1213 in^2
Sample 3 Ultimate strength 2819.5 psi
Sample 3 Ultimate Strength Actual 342 lbs
Sample 3 percent elongation 68.9 %
Sample 3 Time no data0 MM:SS
Sample 4 Width 0.484 in
Sample 4 Thickness 0.248 in
Sample 4 Area 0.12 in^2
Sample 4 Ultimate strength 2850 psi
Sample 4 Ultimate Strength Actual 342 lbs
Sample 4 percent elongation 68.7 %
Sample 4 Time no data0 MM:SS
Sample 5 Width 0.483 in
Sample 5 Thickness 0.251 in
Sample 5 Area 0.1212 in^2
Sample 5 Ultimate strength 3085.8 psi
Sample 5 Ultimate Strength Actual 374 lbs
Sample 5 percent elongation 74.7 %
Sample 5 Time no data0 MM:SS
Sample 6 Width 0.485 in
Sample 6 Thickness 0.246 in
Sample 6 Area 0.1193 in^2
Sample 6 Ultimate strength 2933.8 psi
Sample 6 Ultimate Strength Actual 350 lbs
Sample 6 percent elongation 71.1 %
Sample 6 Time no data0 MM:SS
Ultimate Strength Average 2930 psi
Percent Elongation Average 71 %

Test 5 of 6

DIME Test ID: 2025-09-05-38-5
Test Method: CTM 551-August 2012: Method of Test for Determining Suitability of Materials for Overlayment and Repair of Portland Cement Concrete Pavements and Structures
Verified Date: 09/19/2025
Date Tested: 09/10/2025
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joe.harline@dot.ca.gov
Organization Phone: (916) 206-4373
General Comments for this Test: Accepted supplier's result.
Test Result Compliance: complies
Additional Comments When Verified:
Curing history for Sample 1 24hr
Maximum applied load (P) for Sample 1 1418 lb
Span length for Sample 1 9 in
Break location for Sample 1 bond
Specimen defects/notes for Sample 1 no data
Surface type for Sample 1 SSD
Modulus of rupture (R) for Sample 1 709 psi
Curing history for Sample 2 24hr
Maximum applied load (P) for Sample 2 1104 lb
Span length for Sample 2 9 in
Break location for Sample 2 bond
Specimen defects/notes for Sample 2 no data
Surface type for Sample 2 SSD
Modulus of rupture (R) for Sample 2 552 psi
Curing history for Sample 3 24hr
Maximum applied load (P) for Sample 3 1646 lb
Span length for Sample 3 9 in
Break location for Sample 3 bond
Specimen defects/notes for Sample 3 no data
Surface type for Sample 3 SSD
Modulus of rupture (R) for Sample 3 823 psi

Test 6 of 6

DIME Test ID: 2025-09-05-38-6
Test Method: SCAQMD 309-91-Feb93: Determination of Static Volatile Emissions
Verified Date: 09/19/2025
Date Tested: 09/09/2025
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joe.harline@dot.ca.gov
Organization Phone: (916) 206-4373
General Comments for this Test: Accepted supplier's result.
Test Result Compliance: complies
Additional Comments When Verified:
Diameter of lid 153.9 mm
Room Temperature 78 f
Tare weight no data
Initial weight 100.035 grams
Weight at 5 minutes 100.003 grams
Weight at 10 minutes 99.979 grams
Weight at 15 minutes 99.956 grams
Weight at 20 minutes 99.932 grams
Weight at 25 minutes 99.908 grams
Weight at 30 minutes 99.885 grams
Final weight 99.89 grams
Total weight loss 0.14 grams
Calculated radius of gallon can lid in cm 7.695 cm
Lid Factor 53.757 m^2
Volatile emission 7.795 grams/m^2