Print Report | Back to Sample Detail

Sample Record for 2025-09-06-7

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 1000264 DEA: 060W90U4 EFIS: 0623000128 QA Service Level: 1
DIST-CO-RTE-PM: 06-TUL-198,216-R11.6/R11.9,R0.0/2.7
Work Description: HMA AND MODIFYING SIGNAL AND LIGHTING SYSTEMS.
Location Description: TULARE COUNTY IN AND NEAR VISALIA ON ROUTE 216 FROM 0.2 MILE SOUTH OF LOVERS LANE UNDERCROSSING TO 0.2 MILE EAST OF MCAULIFF STREET AND ON ROUTE 198 FROM 0.1 MILE WEST TO 0.2 MILE EAST OF LOVERS LANE UNDERCROSSING
Contractor Name: Teichert Construction (James Dunnington)
Contractor Address: 5771 Toyota Avenue, Fresno, CA 93725
Resident Engineer: Chris Wilfong Structure Rep.: Martin Garcia

Sample Information

DIME Sample ID: 2025-09-06-7
TL Number from the TL Form:
Sample Submitted By Organization: Oldcastle Precast, Incorporated - Pleasanton
Sample Organization Contact: (925) 846-8183
Type of Sample: Quality Control
Type of Material: Aggregate
Sample Taken Date: 09/06/2025
Date that the sample was received by the laboratory/organization performing the testing: 09/06/2025
The quantity of what the sample constitutes: Week's worth of deliveries
A brief description of the sample: Washed Concrete Sand
From where was the sample collected: Supplier
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Vulcan Materials

Material Information

Source Identification (SMARA, name of Pit or Job Site): Pleasanton-SMARA-91-01-0010
The fabricator's/manufacturer's product name for the sample:
The fabricator/manufacturer designation for the sample:
The plant number:
A detailed description of where the material sample was collected: Stockpile @ Supplier
Where the material sample would have been placed if not sampled:
Primary Aggregate Nominal Size: fine
The concrete mix design number:
Lot number:
Sublot number:
Aggregate Mix Number:
Test results on following page(s): 2

Test Results

Test 1 of 2

DIME Test ID: 2025-09-06-7-1
Test Method: ASTM C136-19: Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates
Verified Date: 09/11/2025
Date Tested: 09/06/2025
Submitted By Organization: Oldcastle Precast, Incorporated - Pleasanton
Organization Address: 1233 Quarry Lane, Suite 145,
Organization City: Pleasanton
Organization State: CA
Organization Zipcode: 94566
Organization Email: juan.maiz@oldcastle.com
Organization Phone: (925) 750-6646
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
What type of gradation is being tested? Fine Aggregate
Cumulative percent passing the 3/8 in. sieve 100 %
Cumulative percent passing the #4 sieve 100 %
Cumulative percent passing the #8 sieve 88 %
Cumulative percent passing the #16 sieve 59 %
Cumulative percent passing the #30 sieve 34 %
Cumulative percent passing the #50 sieve 16 %
Cumulative percent passing the #100 sieve 6 %
Cumulative percent passing the #200 sieve 2.7 %

Test 2 of 2

DIME Test ID: 2025-09-06-7-2
Test Method: ASTM D2419-14: Standard Test Method for Sand Equivalent Value of Soils and Fine Aggregate
Submitted By Organization: Oldcastle Precast, Incorporated - Pleasanton
Organization Address: 1233 Quarry Lane, Suite 145,
Organization City: Pleasanton
Organization State: CA
Organization Zipcode: 94566
Organization Email: juan.maiz@oldcastle.com
Organization Phone: (925) 750-6646
Data has not been verified.