Sample Record for 2025-08-05-86
Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project Information
Project ID: 1000575 DEA: 11430904 EFIS: 1119000199
QA Service Level: 1
DIST-CO-RTE-PM: 11-SD-5,805-Var
Work Description: RESURFACE BRIDGE, REPLACE BRIDGE BARRIER, MGS, AND MODIFY ELECT.
Location Description: SAN DIEGO COUNTY AT VARIOUS LOCATIONS
Contractor Name: J. FRANCIS COMPANY
Contractor Address: 766 Palmyrita Ave. Suite B, Riverside, CA 92507
Resident Engineer: Navid Borzouei Structure Rep.: Unknown
Sample Information
DIME Sample ID: 2025-08-05-86
TL Number from the TL Form:
Sample Submitted By Organization: RMA Group - Rancho Cucamonga
Sample Organization Contact: (909) 989-1751
Type of Sample: Quality Control
Type of Material: Concrete
Sample Taken Date: 08/05/2025
Date that the sample was received by the laboratory/organization performing the testing: 08/06/2025
The quantity of what the sample constitutes: CY
A brief description of the sample: RSC
From where was the sample collected: Source
Laboratory sample identification:
Structure unique identifier:
Structure name: Approach Slab
The fabricator/manufacturer/facility name: GL Throop Co.
Material Information
The concrete mix design number: 2007-007
The truck number from where the sample was collected: 114
The batch plant ticket number from where the sample was collected: 1J16
Concrete batch plant:
The fabricator/manufacturer designation for the sample:
A detailed description of where the material sample was collected: NB Rte805, 47th St, NB Approach Slab Right Shoulder
Where the material sample would have been placed if not sampled:
From Lot No.:
Bag Lot No.:
Test Results
Test 1 of 3
DIME Test ID: 2025-08-05-86-1
Test Method: CTM 521-June 2020: Method of Test for Compressive Strength of Molded Concrete Cylinders
Verified Date: 09/03/2025
Date Tested: 08/06/2025
Submitted By Organization: RMA Group - Rancho Cucamonga
Organization Address: 12130 Santa Margarita Court,
Organization City: Rancho Cucamonga
Organization State: CA
Organization Zipcode: 91730
Organization Email: cbachler@rmacompanies.com
Organization Phone: (909) 989-1751
General Comments for this Test: Avg Comp. Strength - 2230psi
Test Result Compliance:
Additional Comments When Verified:
|
Unit system used?
|
US Units
|
|
Number of specimens
|
5
|
|
Test performed
|
With density determined by dimension measurements
|
|
Average cylinder density (to nearest 1 pcf)
|
145 lb/ft^3
|
|
Average diameter of cylinder 1
|
6.00 in
|
|
Average diameter of cylinder 2
|
6.00 in
|
|
Average diameter of cylinder 3
|
6.00 in
|
|
Average diameter of cylinder 4
|
6.00 in
|
|
Average diameter of cylinder 5
|
6.00 in
|
|
Comment on any defect in either specimen or caps (Max 250 Characters)
|
no data
|
Test 2 of 3
DIME Test ID: 2025-08-05-86-2
Test Method: CTM 521-June 2020: Method of Test for Compressive Strength of Molded Concrete Cylinders
Verified Date: 09/03/2025
Date Tested: 08/08/2025
Submitted By Organization: RMA Group - Rancho Cucamonga
Organization Address: 12130 Santa Margarita Court,
Organization City: Rancho Cucamonga
Organization State: CA
Organization Zipcode: 91730
Organization Email: cbachler@rmacompanies.com
Organization Phone: (909) 989-1751
General Comments for this Test: Avg Comp Strength - 7680psi
Test Result Compliance:
Additional Comments When Verified:
|
Unit system used?
|
US Units
|
|
Number of specimens
|
5
|
|
Test performed
|
With density determined by dimension measurements
|
|
Average cylinder density (to nearest 1 pcf)
|
145 lb/ft^3
|
|
Average diameter of cylinder 1
|
6.00 in
|
|
Average diameter of cylinder 2
|
6.00 in
|
|
Average diameter of cylinder 3
|
6.00 in
|
|
Average diameter of cylinder 4
|
6.00 in
|
|
Average diameter of cylinder 5
|
6.00 in
|
|
Comment on any defect in either specimen or caps (Max 250 Characters)
|
no data
|
Test 3 of 3
DIME Test ID: 2025-08-05-86-3
Test Method: CTM 521-June 2020: Method of Test for Compressive Strength of Molded Concrete Cylinders
Verified Date: 09/03/2025
Date Tested: 09/02/2025
Submitted By Organization: RMA Group - Rancho Cucamonga
Organization Address: 12130 Santa Margarita Court,
Organization City: Rancho Cucamonga
Organization State: CA
Organization Zipcode: 91730
Organization Email: cbachler@rmacompanies.com
Organization Phone: (909) 989-1751
General Comments for this Test: Avg Compressive Strength - 8487psi
Test Result Compliance:
Additional Comments When Verified:
|
Unit system used?
|
US Units
|
|
Number of specimens
|
5
|
|
Test performed
|
With density determined by dimension measurements
|
|
Average cylinder density (to nearest 1 pcf)
|
145 lb/ft^3
|
|
Average diameter of cylinder 1
|
6.00 in
|
|
Average diameter of cylinder 2
|
6.00 in
|
|
Average diameter of cylinder 3
|
6.00 in
|
|
Average diameter of cylinder 4
|
6.00 in
|
|
Average diameter of cylinder 5
|
6.00 in
|
|
Comment on any defect in either specimen or caps (Max 250 Characters)
|
no data
|
