Print Report | Back to Sample Detail

Sample Record for 2025-08-15-6

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 1000942 DEA: 061G7204 EFIS: 0624000159 QA Service Level: 1
DIST-CO-RTE-PM: 06-KIN-43-3.1/10.2
Work Description: TRAFFIC PAVEMENT STRIPE, MARKING AND RUMBLE STRIP.
Location Description: KINGS COUNTY IN AND NEAR CORCORAN FROM 1.9 MILES SOUTH OF NEVADA AVENUE TO 0.2 MILE SOUTH OF KANSAS AVENUE
Contractor Name: CENTRAL STRIPING SERVICE, INC.
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2025-08-15-6
TL Number from the TL Form:
Sample Submitted By Organization: CT D06 - Millbrook Field Laboratory
Sample Organization Contact: (559) 341-3953
Type of Sample: Acceptance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 08/15/2025
Date that the sample was received by the laboratory/organization performing the testing: 08/15/2025
The quantity of what the sample constitutes: 60 tons
A brief description of the sample: 3/4 HMA- A
From where was the sample collected: Manufacturer
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Martin murrieta fresno

Material Information

HMA Type: Type A HMA
HMA Grading: 3/4 inch
Lot number:
Sublot number:
HMA Mix Number:
Binder content (%): 0.0
Virgin binder PG:
Design binder PG:
Binder Supplier: SJR
RAP content (%): 25
WMA Additives:
Antistrip type:
Test results on following page(s): 1

Test Results

Test 1 of 1

DIME Test ID: 2025-08-15-6-1
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 08/18/2025
Date Tested: 08/15/2025
Submitted By Organization: CT D06 - Millbrook Field Laboratory
Organization Address: 1352 W. Olive Ave,
Organization City: Fresno
Organization State: CA
Organization Zipcode: 93728
Organization Email: tomas.silva@dot.ca.gov
Organization Phone: (559) 417-5341
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
What temperature unit is used? Celsius
Test procedure used? Method A
Mass of the specimen basket assembly 3969.3 g
Mass of the specimen and specimen basket assembly prior to ignition 6061.3 g
Mass of HMA Sample prior to ignition 2092 g
Corrected Asphalt Binder Content 5.06 %
Mass Loss 108.2 g
Mass of aggregate remaining after ignition 1983.8 g
Correction Factor (Percent by mass of HMA Specimen) 0.11 %
Moisture Content no data0 %
Temperature Compensation Factor no data0 %
Test Temperature 538 C