Project Information

Project ID: 995174 DEA: 043W5604 EFIS: 0421000388 QA Service Level: 1

DIST-CO-RTE-PM: 04-SOL-12,80,680-Var

Work Description: POLYESTER CONCRETE OVERLAY.

Location Description: SOLANO COUNTY AT VARIOUS LOCATIONS

Contractor Name: MYERS & SONS CONSTRUCTION, LLC

Contractor Address: 45 Morrison ave, Sacramento, CA 95838

Resident Engineer: Justen Tatum Structure Rep.: Kambiz Kouchesfahani

Sample Information

DIME Sample ID: 2025-07-08-80

TL Number from the TL Form:

Sample Submitted By Organization: CT D04 - Hayward Field Laboratory

Sample Organization Contact: (510) 723-0168

Type of Sample: Quality Assurance

Type of Material: Aggregate

Sample Taken Date: 07/08/2025

Date that the sample was received by the laboratory/organization performing the testing: 07/09/2025

The quantity of what the sample constitutes: 100Tons

A brief description of the sample: 3/4"HMA-R25-WMA

From where was the sample collected: Manufacturer

Laboratory sample identification:

Structure unique identifier:

Structure name:

The fabricator/manufacturer/facility name: Vulcan Napa Plant

Material Information

Source Identification (SMARA, name of Pit or Job Site): 91-49-0004

The fabricator's/manufacturer's product name for the sample:

The fabricator/manufacturer designation for the sample:

The plant number:

A detailed description of where the material sample was collected: At the plant

Where the material sample would have been placed if not sampled:

Primary Aggregate Nominal Size: 3/4 inch

The concrete mix design number:

Lot number: 1

Sublot number: 18

Aggregate Mix Number:

Test Results

Test 1 of 2

DIME Test ID: 2025-07-08-80-3

Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)

Verified Date: 08/14/2025

Date Tested: 07/14/2025

Submitted By Organization: CT D04 - Hayward Field Laboratory

Organization Address: 21339 Cabot Boulevard,

Organization City: Hayward

Organization State: CA

Organization Zipcode: 94545

Organization Email: pamela.brown@dot.ca.gov

Organization Phone: (510) 385-8258

General Comments for this Test:

Test Result Compliance: complies

Additional Comments When Verified:

What type of gradation is being tested?	HMA Gradation
Cumulative percent passing the 2 in. sieve	no data
Cumulative percent passing the 1 1/2 in. sieve	100 %
Cumulative percent passing the 1 in. sieve	100 %
Cumulative percent passing the 3/4 in. sieve	100 %
Cumulative percent passing the 1/2 in. sieve	100 %
Cumulative percent passing the 3/8 in. sieve	98 %
Cumulative percent passing the #4 sieve	68 %
Cumulative percent passing the #8 sieve	50 %
Cumulative percent passing the #16 sieve	44 %
Cumulative percent passing the #30 sieve	27 %
Cumulative percent passing the #50 sieve	19 %
Cumulative percent passing the #100 sieve	12 %
Cumulative percent passing the #200 sieve	8.3 %

Test 2 of 2

DIME Test ID: 2025-07-08-80-4

Test Method: AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)