Print Report | Back to Sample Detail

Sample Record for 2025-07-26-6

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 995193 DEA: 07356604 EFIS: 0719000026 QA Service Level: 1
DIST-CO-RTE-PM: 07-LA-605-R10.2/20.2
Work Description: LANE & SLAB REPLACEMENT, COLD PLANE & HMA OVERLAY.
Location Description: LOS ANGELES COUNTY IN SANTA FE SPRINGS, PICO RIVERA, WHITTIER, CITY OF INDUSTRY AND EL MONTE FROM TELEGRAPH ROAD UNDERCROSSING TO ROUTE 605/10 SEPARATION
Contractor Name: MYERS & SONS CONSTRUCTION, LLC
Contractor Address: 45 Morrison Ave, Sacramento, CA 95838
Resident Engineer: Jerome Arabe Structure Rep.: Tien Chu

Sample Information

DIME Sample ID: 2025-07-26-6
TL Number from the TL Form:
Sample Submitted By Organization: Alta Vista Solutions - Whittier
Sample Organization Contact: (510) 542-9827
Type of Sample: Quality Assurance
Type of Material: Aggregate
Sample Taken Date: 07/26/2025
Date that the sample was received by the laboratory/organization performing the testing: 07/26/2025
The quantity of what the sample constitutes: 170 SY
A brief description of the sample: Class 3 Aggregate Base
From where was the sample collected: Job Site
Laboratory sample identification: 25-2407
Structure unique identifier:
Structure name: SB-605 Lane #3
The fabricator/manufacturer/facility name: N/A

Material Information

Source Identification (SMARA, name of Pit or Job Site): N/A
The fabricator's/manufacturer's product name for the sample: Class 3 Aggregate Base
The fabricator/manufacturer designation for the sample: Compactions Testing
The plant number:
A detailed description of where the material sample was collected: Jobsite
Where the material sample would have been placed if not sampled: Jobsite
Primary Aggregate Nominal Size: 3/4 inch
The concrete mix design number:
Lot number:
Sublot number:
Aggregate Mix Number:

Test Results

Test 1 of 2

DIME Test ID: 2025-07-26-6-1
Test Method: CTM 231-March 2013: Method of Test for Relative Compaction of Untreated and Treated Soils and Aggregates Using Nuclear Gages
Verified Date: 08/14/2025
Date Tested: 07/26/2025
Submitted By Organization: Alta Vista Solutions - Whittier
Organization Address: 12409 Slauson Avenue, Suite I,
Organization City: Whittier
Organization State: CA
Organization Zipcode: 90606
Organization Email: nicholas.hoffmann@oneatlas.com
Organization Phone: (510) 542-9827
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Standard Count Density 2426 g/cc
Count or Density 1 2197 g/cc
Count or Density 2 2242 g/cc
Count or Density 3 2111 g/cc
Standard Count Moisture 774 g/cc
Moisture Count 1 140 g/cc
Moisture Count 2 129 g/cc
Moisture Count 3 154 g/cc
Sum of Count or Density 6550 g/cc
Average of Count or Density 2183.33 g/cc
Sum of Moisture Count 423 g/cc
Average of Moisture Count 141 g/cc
Calculated Percent Relative Compaction 96.8 %
Reported Percent Relative Compaction 97 %

Test 2 of 2

DIME Test ID: 2025-07-26-6-2
Test Method: CTM 216-June 2011: Method of Test for Relative Compaction of Untreated and Treated Soils and Aggregates
Verified Date: 08/14/2025
Date Tested: 07/26/2025
Submitted By Organization: Alta Vista Solutions - Whittier
Organization Address: 12409 Slauson Avenue, Suite I,
Organization City: Whittier
Organization State: CA
Organization Zipcode: 90606
Organization Email: nicholas.hoffmann@oneatlas.com
Organization Phone: (510) 542-9827
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Is oversize material No
In-place wet density 2.13
Highest adjust wet density 2.2
Relative compaction 97
% Moisture 7 %
Optimum Moisture 9 %