Print Report | Back to Sample Detail

Sample Record for 2025-08-05-48

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 1001001 DEA: 081N7704 EFIS: 0823000047 QA Service Level: 1
DIST-CO-RTE-PM: 08-SBD-173-L0.0/L7.7
Work Description: COLD PLANE AC PVMT, HMA (TYPE A), AND REPLACE AC SURFACING.
Location Description: SAN BERNARDINO COUNTY IN HESPERIA FROM ROUTE 138 TO 0.5 MILE EAST OF ARROWHEAD LAKE ROAD
Contractor Name: CALMEX ENGINEERING, INC.
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2025-08-05-48
TL Number from the TL Form:
Sample Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Sample Organization Contact: 213-792-4794
Type of Sample: Acceptance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 08/05/2025
Date that the sample was received by the laboratory/organization performing the testing: 08/07/2025
The quantity of what the sample constitutes: 2 BOXES OF HMA
A brief description of the sample: 3/4" WMA A SP RAP 20% EVO .50%
From where was the sample collected: Manufacturer
Laboratory sample identification: 0492A-25
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Vulcan Oro Grande

Material Information

HMA Type: Type A HMA
HMA Grading: 3/4 inch
Lot number:
Sublot number:
HMA Mix Number: 220311W ORO VAL
Binder content (%): 0.0
Virgin binder PG:
Design binder PG:
Binder Supplier:
RAP content (%):
WMA Additives:
Antistrip type:

Test Results

Test 1 of 1

DIME Test ID: 2025-08-05-48-1
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 08/15/2025
Date Tested: 08/10/2025
Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: (909) 829-3029
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
What temperature unit is used? Celsius
Test procedure used? Method A
Mass of HMA Sample prior to ignition 2163.9 g
Corrected Asphalt Binder Content 4.93 %
Mass Loss 117.2 g
Correction Factor (Percent by mass of HMA Specimen) 0.35 %
Moisture Content no data0 %
Temperature Compensation Factor 0.14 %
Test Temperature 538 C