Print Report | Back to Sample Detail

Sample Record for 2025-08-09-1

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 1000802 DEA: 07346804 EFIS: 0718000079 QA Service Level: 1
DIST-CO-RTE-PM: 07-VEN-232-0.4/R4.1
Work Description: COLD PLANE AND OVERLAY WITH HMA & RHMA.
Location Description: VENTURA COUNTY IN AND NEAR OXNARD FROM ROUTE 232/101 SEPARATION TO ROUTE 118
Contractor Name: TORO ENTERPRISES, INC.
Contractor Address: Unknown
Resident Engineer: Pantaleon "Torch" Rivera Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2025-08-09-1
TL Number from the TL Form:
Sample Submitted By Organization: CT D07 - Materials Field Laboratory, Unit 1953
Sample Organization Contact: (213) 817-0387
Type of Sample: Acceptance
Type of Material: Aggregate
Sample Taken Date: 08/09/2025
Date that the sample was received by the laboratory/organization performing the testing: 08/09/2025
The quantity of what the sample constitutes: 211.48
A brief description of the sample: Aggregate Base
From where was the sample collected: Job Site
Laboratory sample identification: 25-2666
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: On-Site

Material Information

Source Identification (SMARA, name of Pit or Job Site): NA
The fabricator's/manufacturer's product name for the sample:
The fabricator/manufacturer designation for the sample:
The plant number:
A detailed description of where the material sample was collected: CTM 231 Test Holes
Where the material sample would have been placed if not sampled:
Primary Aggregate Nominal Size: 3/4 inch
The concrete mix design number:
Lot number:
Sublot number:
Aggregate Mix Number:
Test results on following page(s): 2

Test Results

Test 1 of 2

DIME Test ID: 2025-08-09-1-1
Test Method: CTM 216-June 2011: Method of Test for Relative Compaction of Untreated and Treated Soils and Aggregates
Verified Date: 08/09/2025
Date Tested: 08/09/2025
Submitted By Organization: CT D07 - Materials Field Laboratory, Unit 1953
Organization Address: 1940 South Workman Mill Road,
Organization City: Whittier
Organization State: CA
Organization Zipcode: 90601
Organization Email: chad.chotibhongs@dot.ca.gov
Organization Phone: (213) 407-6963
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Is oversize material No
In-place wet density 2.03
Highest adjust wet density 2.12
Relative compaction 96
% Moisture 10.9 %
Optimum Moisture 10.9 %

Test 2 of 2

DIME Test ID: 2025-08-09-1-2
Test Method: CTM 231-March 2013: Method of Test for Relative Compaction of Untreated and Treated Soils and Aggregates Using Nuclear Gages
Verified Date: 08/09/2025
Date Tested: 08/09/2025
Submitted By Organization: CT D07 - Materials Field Laboratory, Unit 1953
Organization Address: 1940 South Workman Mill Road,
Organization City: Whittier
Organization State: CA
Organization Zipcode: 90601
Organization Email: chad.chotibhongs@dot.ca.gov
Organization Phone: (213) 407-6963
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Standard Count Density 2079 g/cc
Count or Density 1 2 g/cc
Count or Density 2 2.05 g/cc
Count or Density 3 2.04 g/cc
Standard Count Moisture 597 g/cc
Moisture Count 1 0.21 g/cc
Moisture Count 2 0.15 g/cc
Moisture Count 3 0.24 g/cc
Sum of Count or Density 6.09 g/cc
Average of Count or Density 2.03 g/cc
Sum of Moisture Count 0.6 g/cc
Average of Moisture Count 0.2 g/cc
Calculated Percent Relative Compaction 95.8 %
Reported Percent Relative Compaction 96 %