Print Report | Back to Sample Detail

Sample Record for 2025-08-05-23

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 1000943 DEA: 09404304 EFIS: 0924000070 QA Service Level: 1
DIST-CO-RTE-PM: 09-MNO-120-32.1/R35.0,48.0/50.0
Work Description: COLD IN-PLACE RECYCLE EXISTING PAVEMENT AND PLACE HMA.
Location Description: MONO COUNTY NEAR BENTON FROM 0.5 MILE EAST TO 3.4 MILES EAST OF BAXTER\'S ROAD AND FROM 2.0 MILES WEST OF BLACK LAKE ROAD TO BLACK LAKE ROAD
Contractor Name: PAPICH CONSTRUCTION COMPANY, INC.
Contractor Address: 398 Sunrise Terrace, Arroyo Grande, CA 93420
Resident Engineer: Melissa Reynolds Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2025-08-05-23
TL Number from the TL Form:
Sample Submitted By Organization: CT D09 - Bishop Field Laboratory
Sample Organization Contact: (760) 872-5211
Type of Sample: Acceptance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 08/05/2025
Date that the sample was received by the laboratory/organization performing the testing: 08/05/2025
The quantity of what the sample constitutes: 12 Boxes of HMA
A brief description of the sample: 1/2" HMA 58-34M R25
From where was the sample collected: Job Site
Laboratory sample identification: HMA-4
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Granite Lee Vining

Material Information

HMA Type: Type A HMA
HMA Grading: 1/2 inch
Lot number: 1
Sublot number: 4
HMA Mix Number:
Binder content (%): 0.0
Virgin binder PG:
Design binder PG:
Binder Supplier:
RAP content (%):
WMA Additives:
Antistrip type:

Test Results

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
2025-08-05-23-1AASHTO T209-22: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)08/05/2025Not scheduledJeffery PuenteCT D09 - Bishop Field LaboratoryDerek Carrington
2025-08-05-23-2AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)08/05/2025Not scheduledJeffery PuenteCT D09 - Bishop Field LaboratoryDerek Carrington