Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 88888 DEA: SMTL-STOCK EFIS: SMTL-STOCK
QA Service Level:
DIST-CO-RTE-PM: 59---
Work Description: Special project for SMTL stock material. Object Code: 1025. J2 DEA: 912680.
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown
DIME Sample ID: 2025-08-01-8
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Sample Organization Contact: (530) 329-6527
Type of Sample: Quality Assurance
Type of Material: SMTL TM3 - Fastener Assembly
Sample Taken Date: 08/01/2025
Date that the sample was received by the laboratory/organization performing the testing: 08/04/2025
The quantity of what the sample constitutes: 21775
A brief description of the sample: A325 Bolt
From where was the sample collected: Manufacturer
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: AFC Industries
Rocap Number(s):
Heat Number(s): X9824
Nut Mfg. Lot Number(s):
Washer Mfg. Lot Number(s):
Bolt Specification: A325
Bolt Length(s): 4-3/4"
Nut Specification: NA
Washer Specification: NA
Finish: HDG
Diameter/Size: 1-1/2"
Bolt Mfg. Lot Number: 40673690-PPO
Rocap Test Requirement(s):
Lubricant Requirements(s):
Washer Inner Diameter(s):
DIME Test ID: 2025-08-01-8-1
Test Method: ASME B1.2-83r17: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)
Verified Date: 09/11/2025
Date Tested: 09/09/2025
Submitted By Organization: Phoenix National Lab
Organization Address: 941 South Park Lane, Suite 102 ,
Organization City: Tempe
Organization State: AZ
Organization Zipcode: 85281
Organization Email: kyle@pnltest.com
Organization Phone: 602-431-8887
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
40673690-PPO
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
no data
|
|
Size
|
1.5 in
|
|
Bolt Length
|
4.75 in
|
|
Pitch Diameter
|
1.4010 in
|
|
Pitch Diameter 2nd
|
1.4010 in
|
DIME Test ID: 2025-08-01-8-2
Test Method: ASME B1.2-83r17: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)
Verified Date: 09/11/2025
Date Tested: 09/09/2025
Submitted By Organization: Phoenix National Lab
Organization Address: 941 South Park Lane, Suite 102 ,
Organization City: Tempe
Organization State: AZ
Organization Zipcode: 85281
Organization Email: kyle@pnltest.com
Organization Phone: 602-431-8887
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1B
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
40673690-PPO
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
no data
|
|
Size
|
1.5 in
|
|
Bolt Length
|
4.75 in
|
|
Pitch Diameter
|
1.4028 in
|
|
Pitch Diameter 2nd
|
1.4028 in
|
DIME Test ID: 2025-08-01-8-3
Test Method: ASME B1.2-83r17: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)
Verified Date: 09/11/2025
Date Tested: 09/09/2025
Submitted By Organization: Phoenix National Lab
Organization Address: 941 South Park Lane, Suite 102 ,
Organization City: Tempe
Organization State: AZ
Organization Zipcode: 85281
Organization Email: kyle@pnltest.com
Organization Phone: 602-431-8887
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1C
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
40673690-PPO
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
no data
|
|
Size
|
1.5 in
|
|
Bolt Length
|
4.75 in
|
|
Pitch Diameter
|
1.3991 in
|
|
Pitch Diameter 2nd
|
1.3991 in
|
DIME Test ID: 2025-08-01-8-4
Test Method: ASME B1.2-83r17: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)
Verified Date: 09/11/2025
Date Tested: 09/09/2025
Submitted By Organization: Phoenix National Lab
Organization Address: 941 South Park Lane, Suite 102 ,
Organization City: Tempe
Organization State: AZ
Organization Zipcode: 85281
Organization Email: kyle@pnltest.com
Organization Phone: 602-431-8887
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1D
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
40673690-PPO
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
no data
|
|
Size
|
1.5 in
|
|
Bolt Length
|
4.75 in
|
|
Pitch Diameter
|
1.3974 in
|
|
Pitch Diameter 2nd
|
1.3974 in
|
DIME Test ID: 2025-08-01-8-5
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 09/11/2025
Date Tested: 09/09/2025
Submitted By Organization: Phoenix National Lab
Organization Address: 941 South Park Lane, Suite 102 ,
Organization City: Tempe
Organization State: AZ
Organization Zipcode: 85281
Organization Email: kyle@pnltest.com
Organization Phone: 602-431-8887
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
40673690-PPO
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
no data
|
|
Size
|
1.5 in
|
|
Bolt Length
|
4.75 in
|
|
Measurement Average
|
3.4 mils
|
DIME Test ID: 2025-08-01-8-6
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 09/11/2025
Date Tested: 09/09/2025
Submitted By Organization: Phoenix National Lab
Organization Address: 941 South Park Lane, Suite 102 ,
Organization City: Tempe
Organization State: AZ
Organization Zipcode: 85281
Organization Email: kyle@pnltest.com
Organization Phone: 602-431-8887
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1B
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
40673690-PPO
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
no data
|
|
Size
|
1.5 in
|
|
Bolt Length
|
4.75 in
|
|
Measurement Average
|
4.7 mils
|
DIME Test ID: 2025-08-01-8-7
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 09/11/2025
Date Tested: 09/09/2025
Submitted By Organization: Phoenix National Lab
Organization Address: 941 South Park Lane, Suite 102 ,
Organization City: Tempe
Organization State: AZ
Organization Zipcode: 85281
Organization Email: kyle@pnltest.com
Organization Phone: 602-431-8887
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1C
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
40673690-PPO
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
no data
|
|
Size
|
1.5 in
|
|
Bolt Length
|
4.75 in
|
|
Measurement Average
|
7.3 mils
|
DIME Test ID: 2025-08-01-8-8
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 09/11/2025
Date Tested: 09/09/2025
Submitted By Organization: Phoenix National Lab
Organization Address: 941 South Park Lane, Suite 102 ,
Organization City: Tempe
Organization State: AZ
Organization Zipcode: 85281
Organization Email: kyle@pnltest.com
Organization Phone: 602-431-8887
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1D
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
40673690-PPO
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
no data
|
|
Size
|
1.5 in
|
|
Bolt Length
|
4.75 in
|
|
Measurement Average
|
3.8 mils
|
DIME Test ID: 2025-08-01-8-9
Test Method: ASTM F606-21: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)
Verified Date: 09/11/2025
Date Tested: 09/09/2025
Submitted By Organization: Phoenix National Lab
Organization Address: 941 South Park Lane, Suite 102 ,
Organization City: Tempe
Organization State: AZ
Organization Zipcode: 85281
Organization Email: kyle@pnltest.com
Organization Phone: 602-431-8887
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
|
Number of Samples
|
4
|
| Sample | Bolt Mfg. Lot Number | Size (in) | Peak Load (lbf) | Peak Load (kN) | Comments | Tested By | | 1A | 40673690-PPO | 1.5 | 192140 | 0 | NA | W Torres | | 1B | 40673690-PPO | 1.5 | 196280 | 0 | NA | W Torres | | 1C | 40673690-PPO | 1.5 | 198980 | 0 | NA | W Torres | | 1D | 40673690-PPO | 1.5 | 194490 | 0 | NA | W Torres |
| |
|
UTM
|
NA
|
|
Temperature
|
0 f
|
