Print Report | Back to Sample Detail

Sample Record for 2025-08-01-2

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 1001232 DEA: 032H4514 EFIS: 0324000171 MINOR: 03A3872 QA Service Level: 1
DIST-CO-RTE-PM: 03-YOL-505-R10.6/0.0
Work Description: Seismic Retrofit at Putah Creek Bridge
Location Description: Construction On State Highway In Solano and Yolo Counties near Winters at Putah Creek Bridge.
Contractor Name: TPA CONSTRUCTION INC.
Contractor Address: 1770 Booth Road, Roseville, CA 95747
Resident Engineer: Luis Pompa Structure Rep.: Brent Bullard

Sample Information

DIME Sample ID: 2025-08-01-2
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - QASI Sacramento Field Office
Sample Organization Contact: (916) 2058871
Type of Sample: Quality Assurance
Type of Material: SMTL TM3 - Fastener Assembly
Sample Taken Date: 08/01/2025
Date that the sample was received by the laboratory/organization performing the testing: 08/05/2025
The quantity of what the sample constitutes: 6
A brief description of the sample: 1" diameter All-Thread Rod
From where was the sample collected: Fabricator
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Opticomp Construction

Material Information

Rocap Number(s):
Heat Number(s): 79015900 5806355003
Nut Mfg. Lot Number(s): 41973-5806355003
Washer Mfg. Lot Number(s):
Bolt Specification: A193 Gr. B7 & F1554 Gr. 105
Bolt Length(s): 12"
Nut Specification: n/a
Washer Specification: n/a
Finish: HDG
Diameter/Size: 1"
Bolt Mfg. Lot Number: 2505121-23
Rocap Test Requirement(s):
Lubricant Requirements(s):
Washer Inner Diameter(s):
Test results on following page(s): 5

Test Results

Test 1 of 5

DIME Test ID: 2025-08-01-2-1
Test Method: ASME B1.2-83r17: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)
Verified Date: 08/12/2025
Date Tested: 08/12/2025
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) 79015900
Mfg. Lot Number no data
Finish Coating ASTM F2329 - Hot Dip
Product Markings no data
Size 1 in
Bolt Length 12 in
Pitch Diameter 0.92385 in
Pitch Diameter 2nd no data in

Test 2 of 5

DIME Test ID: 2025-08-01-2-2
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 08/12/2025
Date Tested: 08/12/2025
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) 79015900
Mfg. Lot Number no data
Finish Coating ASTM F2329 - Hot Dip
Product Markings no data
Size 1 in
Bolt Length 12 in
Measurement Average 7.4 mils

Test 3 of 5

DIME Test ID: 2025-08-01-2-3
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 08/12/2025
Date Tested: 08/12/2025
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 41973-5806355003
Finish Coating ASTM F2329 - Hot Dip
Product Markings no data
Size 1 in
Bolt Length no data in
Measurement Average 4.5 mils

Test 4 of 5

DIME Test ID: 2025-08-01-2-4
Test Method: ASTM E18-20: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 08/12/2025
Date Tested: 08/12/2025
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number 41973-5806355003
Finish Coating ASTM F2329 - Hot Dip
Product Markings no data
Size 1 in
Bolt Length no data in
Hardness Reading Scale C Scale
Hardness Reading Average 32.8
Spacing Ok

Test 5 of 5

DIME Test ID: 2025-08-01-2-5
Test Method: ASTM A370-20: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)
Verified Date: 08/12/2025
Date Tested: 08/12/2025
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Number of Samples 1
SampleHeat NumberDiameter (in)Area (sqin)Stress at Offset (psi)Tensile Strength (psi)Elongation in 4 x d (%)Tested By
1A7901590010.611133001303800000Atlas
UTM NA
Temperature 0 f