Print Report | Back to Sample Detail

Sample Record for 2025-07-29-57

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 1001056 DEA: 112N2074 EFIS: 1123000286 QA Service Level: 1
DIST-CO-RTE-PM: 11-SD-54,805-Var
Work Description: GRIND BRIDGE DECKS, POLYESTER CONCRETE OVERLAY, REPAIR APPROACH SLABS.
Location Description: SAN DIEGO COUNTY AT VARIOUS LOCATIONS
Contractor Name: TRUESDELL CORPORATION OF CALIFORNIA, INC.
Contractor Address: 1310 West 23rd Street, Tempe, AZ 85282
Resident Engineer: Peris Salih Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2025-07-29-57
TL Number from the TL Form: 25-129
Sample Submitted By Organization: Kwik Bond Polymers
Sample Organization Contact: (760) 518-6064
Type of Sample: Quality Control
Type of Material: Methacrylate
Sample Taken Date: 07/29/2025
Date that the sample was received by the laboratory/organization performing the testing: 07/29/2025
The quantity of what the sample constitutes: 100 Totes
A brief description of the sample: 2 pints 204, CHP, Z-Cure,8020
From where was the sample collected: Source
Laboratory sample identification: 000172KBP
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Kwik Bond Polymers, Benicia

Material Information

Mfg. Lot Number(s): 25-80-451550
Batch number: 2580451550
Mix number: 2580451550
Test results on following page(s): 1

Test Results

Test 1 of 1

DIME Test ID: 2025-07-29-57-1
Test Method: CONCLP 4-16: HMWM
Verified Date: 09/18/2025
Date Tested: 09/10/2025
Submitted By Organization: Future Labs, LLC
Organization Address: 124 Lone Wolf Drive,
Organization City: Madison
Organization State: MS
Organization Zipcode: 39110
Organization Email: alexh@futurelabsllc.com
Organization Phone:
General Comments for this Test: Accepted CTM 551 based on supplier's result.
Test Result Compliance: complies
Additional Comments When Verified:
Viscosity (ASTM D 2196) Brookfield RVT with UL adapter, 50 RPM @ 77 deg F, 25 max cps @ 77 deg F 20
Specific gravity (ASTM D 1475) 0.90 min @ 77 deg F 9
Volatile content (ASTM D 2369) 30% max 3.4
Flash point (ASTM D 3828) more than 180 deg F 212
PCC - SSD bond strength (CA Test 551) 500 psi minimum @ 24 hours 636
Tack free time, 400 minutes max 240