Print Report | Back to Sample Detail

Sample Record for 2025-07-28-24

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 1000510 DEA: 060W79U4 EFIS: 0622000189 QA Service Level: 1
DIST-CO-RTE-PM: 06-KER,TUL-99-56.4/57.6,0.0/13.5
Work Description: RDWY EXC, HMA, AGGREGATE BASE, CRCP, SIGN STR, AND STR EXC.
Location Description: KERN AND TULARE COUNTIES IN AND NEAR DELANO FROM 0.2 MILE SOUTH OF CECIL AVENUE OVERCROSSING TO 0.7 MILE NORTH OF AVENUE 100 OVERCROSSING
Contractor Name: SECURITY PAVING COMPANY, INC.
Contractor Address: 2915 Fairhaven Drive, Bakersfield, CA 93308
Resident Engineer: Jake Garcia Structure Rep.: Raman Guraya

Sample Information

DIME Sample ID: 2025-07-28-24
TL Number from the TL Form:
Sample Submitted By Organization: CT D06 - Bakersfield Field Laboratory
Sample Organization Contact: 661-549-8281
Type of Sample: Acceptance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 07/28/2025
Date that the sample was received by the laboratory/organization performing the testing: 07/29/2025
The quantity of what the sample constitutes: L1SL1- PSE sample per CTM 125
A brief description of the sample: 3/4" HMA(type A) with 25% Rap
From where was the sample collected: Source
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Deer Creek Porterville

Material Information

HMA Type: Type A HMA
HMA Grading: 3/4 inch
Lot number: 1
Sublot number: 1
HMA Mix Number: 25J012
Binder content (%): 4.2
Virgin binder PG: PG 64-16
Design binder PG: PG 70-10
Binder Supplier: San Juaquin Refinery
RAP content (%): 25
WMA Additives: No
Antistrip type: Lime
Test results on following page(s): 2

Test Results

Test 1 of 2

DIME Test ID: 2025-07-28-24-1
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Verified Date: 07/29/2025
Date Tested: 07/29/2025
Submitted By Organization: CT D06 - Bakersfield Field Laboratory
Organization Address: 1824 Norris Road,
Organization City: Bakersfield
Organization State: CA
Organization Zipcode: 93308
Organization Email: kulwinder.rai@dot.ca.gov
Organization Phone: (661) 549-8281
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Bulk Specific Gravity 2.551
Bulk Specific Gravity 2 2.571
Bulk Specific Gravity 3 2.531
Average Bulk Specific Gravity 2.551

Test 2 of 2

DIME Test ID: 2025-07-28-24-2
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 07/29/2025
Date Tested: 07/29/2025
Submitted By Organization: CT D06 - Bakersfield Field Laboratory
Organization Address: 1824 Norris Road,
Organization City: Bakersfield
Organization State: CA
Organization Zipcode: 93308
Organization Email: kulwinder.rai@dot.ca.gov
Organization Phone: (661) 549-8281
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
What temperature unit is used? Fahrenheit
Test procedure used? Method A
Mass of the specimen basket assembly 3956.1 g
Mass of the specimen and specimen basket assembly prior to ignition 6080.6 g
Mass of HMA Sample prior to ignition 2124.5 g
Corrected Asphalt Binder Content 3.94 %
Mass Loss 89.5 g
Mass of aggregate remaining after ignition 2035 g
Correction Factor (Percent by mass of HMA Specimen) 0.27 %
Moisture Content no data0 %
Temperature Compensation Factor no data0 %
Test Temperature 538 F