Print Report | Back to Sample Detail

Sample Record for 2025-07-29-7

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 994673 DEA: 033F0704 EFIS: 0312000054 QA Service Level: 1
DIST-CO-RTE-PM: 03-SAC-51-2.0/3.5
Work Description: American River Bridge Rehabilitation
Location Description:
Contractor Name: American River Constructors
Contractor Address: 4001 Bradshaw Road, Sacramento, CA 95827
Resident Engineer: John Ruzic Structure Rep.: Pha Tran

Sample Information

DIME Sample ID: 2025-07-29-7
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - QASI Sacramento Field Office
Sample Organization Contact: (916) 2058871
Type of Sample: Quality Assurance
Type of Material: SMTL TM3 - Fastener Assembly
Sample Taken Date: 07/29/2025
Date that the sample was received by the laboratory/organization performing the testing: 08/07/2025
The quantity of what the sample constitutes: 4,950
A brief description of the sample: A325 HDG Bolts
From where was the sample collected: Fabricator
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: L&B Metal Product Fabrication

Material Information

Rocap Number(s):
Heat Number(s): 10937000
Nut Mfg. Lot Number(s):
Washer Mfg. Lot Number(s):
Bolt Specification: ASTM A325
Bolt Length(s): 2"
Nut Specification: N/A
Washer Specification: N/A
Finish: HDG, ASTM A153/F2329
Diameter/Size: 3/4"
Bolt Mfg. Lot Number: BG2995
Rocap Test Requirement(s):
Lubricant Requirements(s):
Washer Inner Diameter(s):
Test results on following page(s): 12

Test Results

Test 1 of 12

DIME Test ID: 2025-07-29-7-1
Test Method: ASME B1.2-83r17: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)
Verified Date: 09/15/2025
Date Tested: 09/12/2025
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: brian.ellis@dot.ca.gov
Organization Phone: (916) 380-8623
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number BG2995
Finish Coating ASTM F2329 - Hot Dip
Product Markings no data
Size 0.75 in
Bolt Length 2 in
Pitch Diameter 0.7021 in
Pitch Diameter 2nd 0.7021 in

Test 2 of 12

DIME Test ID: 2025-07-29-7-2
Test Method: ASME B1.2-83r17: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)
Verified Date: 09/15/2025
Date Tested: 09/12/2025
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: brian.ellis@dot.ca.gov
Organization Phone: (916) 380-8623
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number BG2995
Finish Coating ASTM F2329 - Hot Dip
Product Markings no data
Size 0.75 in
Bolt Length 2 in
Pitch Diameter 0.6899 in
Pitch Diameter 2nd 0.6899 in

Test 3 of 12

DIME Test ID: 2025-07-29-7-3
Test Method: ASME B1.2-83r17: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)
Verified Date: 09/15/2025
Date Tested: 09/12/2025
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: brian.ellis@dot.ca.gov
Organization Phone: (916) 380-8623
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number BG2995
Finish Coating ASTM F2329 - Hot Dip
Product Markings no data
Size 0.75 in
Bolt Length 2 in
Pitch Diameter 0.6920 in
Pitch Diameter 2nd 0.6920 in

Test 4 of 12

DIME Test ID: 2025-07-29-7-4
Test Method: ASME B1.2-83r17: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)
Verified Date: 09/15/2025
Date Tested: 09/12/2025
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: brian.ellis@dot.ca.gov
Organization Phone: (916) 380-8623
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1D
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number BG2995
Finish Coating ASTM F2329 - Hot Dip
Product Markings no data
Size 0.75 in
Bolt Length 2 in
Pitch Diameter 0.6873 in
Pitch Diameter 2nd 0.6873 in

Test 5 of 12

DIME Test ID: 2025-07-29-7-5
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 09/15/2025
Date Tested: 09/12/2025
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: brian.ellis@dot.ca.gov
Organization Phone: (916) 380-8623
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number BG2995
Finish Coating ASTM F2329 - Hot Dip
Product Markings no data
Size 0.75 in
Bolt Length 2 in
Measurement Average 8.6 mils

Test 6 of 12

DIME Test ID: 2025-07-29-7-6
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 09/15/2025
Date Tested: 09/12/2025
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: brian.ellis@dot.ca.gov
Organization Phone: (916) 380-8623
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number BG2995
Finish Coating ASTM F2329 - Hot Dip
Product Markings no data
Size 0.75 in
Bolt Length 2 in
Measurement Average 5.9 mils

Test 7 of 12

DIME Test ID: 2025-07-29-7-7
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 09/15/2025
Date Tested: 09/12/2025
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: brian.ellis@dot.ca.gov
Organization Phone: (916) 380-8623
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number BG2995
Finish Coating ASTM F2329 - Hot Dip
Product Markings no data
Size 0.75 in
Bolt Length 2 in
Measurement Average 4.3 mils

Test 8 of 12

DIME Test ID: 2025-07-29-7-8
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 09/15/2025
Date Tested: 09/12/2025
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: brian.ellis@dot.ca.gov
Organization Phone: (916) 380-8623
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1D
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number BG2995
Finish Coating ASTM F2329 - Hot Dip
Product Markings no data
Size 0.75 in
Bolt Length 2 in
Measurement Average 4.3 mils

Test 9 of 12

DIME Test ID: 2025-07-29-7-9
Test Method: ASTM E18-20: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 09/15/2025
Date Tested: 09/12/2025
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: brian.ellis@dot.ca.gov
Organization Phone: (916) 380-8623
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number BG2995
Finish Coating ASTM F2329 - Hot Dip
Product Markings no data
Size 0.75 in
Bolt Length 2 in
Hardness Reading Scale C Scale
Hardness Reading Average 30.4
Spacing Ok

Test 10 of 12

DIME Test ID: 2025-07-29-7-10
Test Method: ASTM E18-20: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 09/15/2025
Date Tested: 09/12/2025
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: brian.ellis@dot.ca.gov
Organization Phone: (916) 380-8623
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number BG2995
Finish Coating ASTM F2329 - Hot Dip
Product Markings no data
Size 0.75 in
Bolt Length 2 in
Hardness Reading Scale C Scale
Hardness Reading Average 32
Spacing Ok

Test 11 of 12

DIME Test ID: 2025-07-29-7-11
Test Method: ASTM E18-20: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 09/15/2025
Date Tested: 09/12/2025
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: brian.ellis@dot.ca.gov
Organization Phone: (916) 380-8623
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number BG2995
Finish Coating ASTM F2329 - Hot Dip
Product Markings no data
Size 0.75 in
Bolt Length 2 in
Hardness Reading Scale C Scale
Hardness Reading Average 31
Spacing Ok

Test 12 of 12

DIME Test ID: 2025-07-29-7-12
Test Method: ASTM E18-20: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 09/15/2025
Date Tested: 09/12/2025
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: brian.ellis@dot.ca.gov
Organization Phone: (916) 380-8623
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1D
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number BG2995
Finish Coating ASTM F2329 - Hot Dip
Product Markings no data
Size 0.75 in
Bolt Length 2 in
Hardness Reading Scale C Scale
Hardness Reading Average 30.8
Spacing Ok