Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 1000751 DEA: 060Y1704 EFIS: 0619000004
QA Service Level: 1
DIST-CO-RTE-PM: 06-KIN-41-0.0/15.5
Work Description: COLD PLANE AC PVMT, OVERLAY HMA AND RHMA.
Location Description: KINGS COUNTY NEAR KETTLEMAN CITY FROM THE KERN COUNTY LINE TO 0.8 MILE SOUTH OF ROUTE 5
Contractor Name: PAPICH CONSTRUCTION COMPANY, INC.
Contractor Address: Unknown
Resident Engineer: Oscar Sherrill Structure Rep.: Ramandeep Guraya
DIME Sample ID: 2025-07-23-42
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Sample Organization Contact: (916) 227-7302
Type of Sample: Verification
Type of Material: Asphalt Binder
Sample Taken Date: 07/23/2025
Date that the sample was received by the laboratory/organization performing the testing: 07/25/2025
The quantity of what the sample constitutes: 1 Can
A brief description of the sample: PG 64-10
From where was the sample collected: Source
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: SPM Avenal Plant
Performance Grade: PG 64-10
Modified: No
Lot number: 4
Sublot number: 1
Tank number:
Time of sample:
HMA Supplier:
Certified Asphalt Supplier: San Joaquin Refinery - Bakersfield CA
Multigrade: No
Multigrade Type:
Asphalt Binder Mix Number:
DIME Test ID: 2025-07-23-42-1
Test Method: AASHTO T315-24: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Verified Date: 10/30/2025
Date Tested: 10/29/2025
Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (530) 713-6823
General Comments for this Test: Original
Test Result Compliance: complies
Additional Comments When Verified:
|
Phase
|
Original binder
|
|
Test Gap
|
1 mm
|
|
Test Frequency
|
10.0 rad/s
|
|
Strain Amplitude
|
12.06 %
|
|
Stress Amplitude
|
0.172 kPa
|
|
Phase Angle (δ) (for the 10 cycles)
|
89.5 degree
|
|
Complex Modulus (G*) (for the 10 measurements)
|
1.425 kPa
|
|
Test Temperature (Specimen 1)
|
64.0 C
|
|
Dynamic Shear, G*/sin(δ)
|
1.43 kPa
|
