Print Report | Back to Sample Detail

Sample Record for 2025-07-01-38

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 993387 DEA: 07323404 EFIS: 0716000064 QA Service Level: 1
DIST-CO-RTE-PM: 07-LA-5-R59.5/R67.9
Work Description: PLACE CULVERT, REPLACE DRAINAGE SYSTEM, RECONST ROADWAY & EMBANKMENT.
Location Description: LOS ANGELES COUNTY AT VARIOUS LOCATIONS FROM LAKE HUGHES ROAD UNDERCROSSING TO 1.9 MILES NORTH OF TEMPLIN HIGHWAY UNDERCROSSING
Contractor Name: SECURITY PAVING COMPANY INC
Contractor Address: 13170 TELEFAIR AVE, SYLMAR, CA 91342
Resident Engineer: Oscar Osorio Structure Rep.: Chanh Tong

Sample Information

DIME Sample ID: 2025-07-01-38
TL Number from the TL Form:
Sample Submitted By Organization: Alta Vista Solutions - Whittier
Sample Organization Contact: (510) 542-9827
Type of Sample: Quality Assurance
Type of Material: Aggregate
Sample Taken Date: 07/01/2025
Date that the sample was received by the laboratory/organization performing the testing: 07/01/2025
The quantity of what the sample constitutes: 357 SY
A brief description of the sample: Aggregate Base
From where was the sample collected: Job Site
Laboratory sample identification: 25-2137
Structure unique identifier:
Structure name: SB I-5 Approximately 2 Mile North of Templin off-ramp Sta 3519+82 to 3522+50
The fabricator/manufacturer/facility name: N/A

Material Information

Source Identification (SMARA, name of Pit or Job Site): N/A
The fabricator's/manufacturer's product name for the sample: Aggregate Base
The fabricator/manufacturer designation for the sample: Compaction testing
The plant number:
A detailed description of where the material sample was collected: Jobsite
Where the material sample would have been placed if not sampled:
Primary Aggregate Nominal Size: 3/4 inch
The concrete mix design number:
Lot number:
Sublot number:
Aggregate Mix Number:

Test Results

Test 1 of 2

DIME Test ID: 2025-07-01-38-1
Test Method: CTM 231-March 2013: Method of Test for Relative Compaction of Untreated and Treated Soils and Aggregates Using Nuclear Gages
Verified Date: 07/23/2025
Date Tested: 07/01/2025
Submitted By Organization: Alta Vista Solutions - Whittier
Organization Address: 12409 Slauson Avenue, Suite I,
Organization City: Whittier
Organization State: CA
Organization Zipcode: 90606
Organization Email: nicholas.hoffmann@oneatlas.com
Organization Phone: (510) 542-9827
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Standard Count Density 2923 g/cc
Count or Density 1 1890 g/cc
Count or Density 2 1833 g/cc
Count or Density 3 1583 g/cc
Standard Count Moisture 1063 g/cc
Moisture Count 1 315 g/cc
Moisture Count 2 347 g/cc
Moisture Count 3 383 g/cc
Sum of Count or Density 5306 g/cc
Average of Count or Density 1768.67 g/cc
Sum of Moisture Count 1045 g/cc
Average of Moisture Count 348.33 g/cc
Calculated Percent Relative Compaction 95.4 %
Reported Percent Relative Compaction 95 %

Test 2 of 2

DIME Test ID: 2025-07-01-38-2
Test Method: CTM 216-June 2011: Method of Test for Relative Compaction of Untreated and Treated Soils and Aggregates
Verified Date: 07/23/2025
Date Tested: 07/01/2025
Submitted By Organization: Alta Vista Solutions - Whittier
Organization Address: 12409 Slauson Avenue, Suite I,
Organization City: Whittier
Organization State: CA
Organization Zipcode: 90606
Organization Email: nicholas.hoffmann@oneatlas.com
Organization Phone: (510) 542-9827
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Is oversize material No
In-place wet density 2.09
Highest adjust wet density 2.19
Relative compaction 95
% Moisture 13.6 %
Optimum Moisture 11.6 %