Print Report | Back to Sample Detail

Sample Record for 2025-07-20-1

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 1000926 DEA: 061G8304 EFIS: 0624000171 QA Service Level: 1
DIST-CO-RTE-PM: 06-FRE-99-19.9/21.4
Work Description: REPLACE CONCRETE SLABS WITH HMA, COLD PLANE AND PLACE HMA (TYPE A).
Location Description: FRESNO COUNTY IN FRESNO FROM 0.1 MILE NORTH OF CALIFORNIA AVENUE OVERCROSSING TO 0.1 MILE SOUTH OF EL DORADO STREET OVERCROSSING
Contractor Name: CAL VALLEY CONSTRUCTION, INC.
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2025-07-20-1
TL Number from the TL Form:
Sample Submitted By Organization: CT D06 - Millbrook Field Laboratory
Sample Organization Contact: (559) 341-3953
Type of Sample: Quality Assurance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 07/20/2025
Date that the sample was received by the laboratory/organization performing the testing: 07/21/2025
The quantity of what the sample constitutes: 0-750 Tons Produced
A brief description of the sample: 3/4” HMA Aggregate
From where was the sample collected: Manufacturer
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Vulcan Material Ashlan Plant

Material Information

HMA Type: Type A HMA
HMA Grading: 3/4 inch
Lot number: 1
Sublot number: 11
HMA Mix Number: 221534
Binder content (%): 4.3
Virgin binder PG: PG 70-10
Design binder PG: PG 70-10
Binder Supplier:
RAP content (%): 15
WMA Additives: No
Antistrip type:

Test Results

Test 1 of 1

DIME Test ID: 2025-07-20-1-1
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 07/22/2025
Date Tested: 07/21/2025
Submitted By Organization: CT D06 - Millbrook Field Laboratory
Organization Address: 1352 W. Olive Ave,
Organization City: Fresno
Organization State: CA
Organization Zipcode: 93728
Organization Email: tomas.silva@dot.ca.gov
Organization Phone: (559) 417-5341
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
What temperature unit is used? Celsius
Test procedure used? Method A
Mass of the specimen basket assembly 3990.4 g
Mass of the specimen and specimen basket assembly prior to ignition 6211.9 g
Mass of HMA Sample prior to ignition 2221.5 g
Corrected Asphalt Binder Content 4.51 %
Mass Loss 100.3 g
Mass of aggregate remaining after ignition 2121.2 g
Correction Factor (Percent by mass of HMA Specimen) no data0 %
Moisture Content no data0 %
Temperature Compensation Factor no data0 %
Test Temperature 538 C