Print Report | Back to Sample Detail

Sample Record for 2025-07-16-47

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 1000943 DEA: 09404304 EFIS: 0924000070 QA Service Level: 1
DIST-CO-RTE-PM: 09-MNO-120-32.1/R35.0,48.0/50.0
Work Description: COLD IN-PLACE RECYCLE EXISTING PAVEMENT AND PLACE HMA.
Location Description: MONO COUNTY NEAR BENTON FROM 0.5 MILE EAST TO 3.4 MILES EAST OF BAXTER\'S ROAD AND FROM 2.0 MILES WEST OF BLACK LAKE ROAD TO BLACK LAKE ROAD
Contractor Name: PAPICH CONSTRUCTION COMPANY, INC.
Contractor Address: 398 Sunrise Terrace, Arroyo Grande, CA 93420
Resident Engineer: Melissa Reynolds Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2025-07-16-47
TL Number from the TL Form:
Sample Submitted By Organization: CT D09 - Bishop Field Laboratory
Sample Organization Contact: (760) 872-5211
Type of Sample: Verification
Type of Material: Hot Mix Asphalt
Sample Taken Date: 07/16/2025
Date that the sample was received by the laboratory/organization performing the testing: 07/16/2025
The quantity of what the sample constitutes: 750 Tons
A brief description of the sample: 1/2" HMA-A-SP PG58-34M R25
From where was the sample collected: Source
Laboratory sample identification: JMF-1
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Granite Lee Vining Plant

Material Information

HMA Type: Type A HMA
HMA Grading: 1/2 inch
Lot number:
Sublot number:
HMA Mix Number:
Binder content (%): 5.1
Virgin binder PG:
Design binder PG:
Binder Supplier:
RAP content (%): 25
WMA Additives:
Antistrip type:
Test results on following page(s): 4

Test Results

Test 1 of 4

DIME Test ID: 2025-07-16-47-1
Test Method: AASHTO T209-22: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 07/21/2025
Date Tested: 07/16/2025
Submitted By Organization: CT D09 - Bishop Field Laboratory
Organization Address: 500 South Main Street,
Organization City: Bishop
Organization State: CA
Organization Zipcode: 93514
Organization Email: chris.talbot@dot.ca.gov
Organization Phone: (760) 872-0794
General Comments for this Test: JMF-1
Test Result Compliance: complies
Additional Comments When Verified:
Number of Samples 1
What is the unit of measurement for theoretical density? US Units
Mass Determination Air
Method Performed Mechanical Agitation - Method A
Mass of container filled with water 1 7310.5 grams
Mass of oven-dry sample in air for Sample 1 1913.7 grams
Mass of container filled with the sample and water for Sample 1 8459.2 grams
Temperature of Water 177 °F
Specific Gravity for Sample 1 2.502
Theoretical maximum density at 25°C (77°F) 155.7 lb/ft^3

Test 2 of 4

DIME Test ID: 2025-07-16-47-2
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 07/21/2025
Date Tested: 07/16/2025
Submitted By Organization: CT D09 - Bishop Field Laboratory
Organization Address: 500 South Main Street,
Organization City: Bishop
Organization State: CA
Organization Zipcode: 93514
Organization Email: chris.talbot@dot.ca.gov
Organization Phone: (760) 872-0794
General Comments for this Test: JMF-1. Oil % out of spec. Spec = 4.80-5.60
Test Result Compliance: does not comply
Additional Comments When Verified:
What temperature unit is used? Celsius
Test procedure used? Method A
Mass of the specimen basket assembly 4274.8 g
Mass of the specimen and specimen basket assembly prior to ignition 5913.4 g
Mass of HMA Sample prior to ignition 1638.6 g
Corrected Asphalt Binder Content 4.1 %
Mass Loss 73.6 g
Mass of aggregate remaining after ignition 1565 g
Correction Factor (Percent by mass of HMA Specimen) 0.39 %
Moisture Content no data0 %
Temperature Compensation Factor no data0 %
Test Temperature 538 C

Test 3 of 4

DIME Test ID: 2025-07-16-47-3
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Verified Date: 07/21/2025
Date Tested: 07/16/2025
Submitted By Organization: CT D09 - Bishop Field Laboratory
Organization Address: 500 South Main Street,
Organization City: Bishop
Organization State: CA
Organization Zipcode: 93514
Organization Email: chris.talbot@dot.ca.gov
Organization Phone: (760) 872-0794
General Comments for this Test: JMF-1
Test Result Compliance: complies
Additional Comments When Verified:
Bulk Specific Gravity 2.292
Bulk Specific Gravity 2 2.294
Bulk Specific Gravity 3 2.294
Average Bulk Specific Gravity 2.293

Test 4 of 4

DIME Test ID: 2025-07-16-47-4
Test Method: AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)
Verified Date: 07/21/2025
Date Tested: 07/16/2025
Submitted By Organization: CT D09 - Bishop Field Laboratory
Organization Address: 500 South Main Street,
Organization City: Bishop
Organization State: CA
Organization Zipcode: 93514
Organization Email: chris.talbot@dot.ca.gov
Organization Phone: (760) 872-0794
General Comments for this Test: JMF-1. Voids are out of spec. Spec = 2.5-5.5
Test Result Compliance: does not comply
Additional Comments When Verified:
Percent Air Voids 8.4 %
Percent Air Voids 2 8.3 %
Percent Air Voids 3 8.3 %
Average Percent Air Voids 8.3 %