Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 1000661 DEA: 081J2704 EFIS: 0818000014
QA Service Level: 1
DIST-CO-RTE-PM: 08-SBD-247-0.0/23.0
Work Description: RUBBERIZED HMA, HMA (TYPE A), COLD PLANE AC PVMT & REPLACE AC SURF.
Location Description: SAN BERNARDINO COUNTY IN YUCCA VALLEY FROM ROUTE 62 TO 0.4 MILE WEST OF GIN ROAD
Contractor Name: SULLY-MILLER CONTRACTING COMPANY
Contractor Address: 135 S State College Blvd, Brea, CA 92821
Resident Engineer: Walid Saoud Structure Rep.: Unknown
DIME Sample ID: 2025-07-15-38
TL Number from the TL Form:
Sample Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Sample Organization Contact: 213-792-4794
Type of Sample: Acceptance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 07/15/2025
Date that the sample was received by the laboratory/organization performing the testing: 07/16/2025
The quantity of what the sample constitutes: 6 BOXES RHMA, 1 QT PG64-16, 1 QT RUBBER BLEND
A brief description of the sample: 3/4" RHMA G SP 0.3% EVO
From where was the sample collected: Manufacturer
Laboratory sample identification: 0440G-25
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Blue Diamond Victorville
DIME Test ID: 2025-07-15-38-1
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 07/23/2025
Date Tested: 07/18/2025
Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: (909) 829-3029
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
|
What temperature unit is used?
|
Celsius
|
|
Test procedure used?
|
Method A
|
|
Mass of HMA Sample prior to ignition
|
2176.7 g
|
|
Corrected Asphalt Binder Content
|
7.4 %
|
|
Mass Loss
|
165.2 g
|
|
Correction Factor (Percent by mass of HMA Specimen)
|
0.07 %
|
|
Moisture Content
|
no data0 %
|
|
Temperature Compensation Factor
|
0.12 %
|
|
Test Temperature
|
538 C
|