Print Report | Back to Sample Detail

Sample Record for 2025-06-15-12

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 1000661 DEA: 081J2704 EFIS: 0818000014 QA Service Level: 1
DIST-CO-RTE-PM: 08-SBD-247-0.0/23.0
Work Description: RUBBERIZED HMA, HMA (TYPE A), COLD PLANE AC PVMT & REPLACE AC SURF.
Location Description: SAN BERNARDINO COUNTY IN YUCCA VALLEY FROM ROUTE 62 TO 0.4 MILE WEST OF GIN ROAD
Contractor Name: SULLY-MILLER CONTRACTING COMPANY
Contractor Address: 135 S State College Blvd, Brea, CA 92821
Resident Engineer: Walid Saoud Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2025-06-15-12
TL Number from the TL Form:
Sample Submitted By Organization: CT D08 - Barstow Field Laboratory 1
Sample Organization Contact: (760) 252-9216
Type of Sample: Acceptance
Type of Material: Aggregate
Sample Taken Date: 06/15/2025
Date that the sample was received by the laboratory/organization performing the testing: 06/16/2025
The quantity of what the sample constitutes: 218.57 Tons @ 8:34 PM & 779.98 @ 11:13 PM
A brief description of the sample: 3/4" HMA COARSE AGGREGATES
From where was the sample collected: Manufacturer
Laboratory sample identification: L-1 SL-33, L-1 SL-34
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Blue Diamond-Victorville

Material Information

Source Identification (SMARA, name of Pit or Job Site): 91-36-0022, 91-36-0046
The fabricator's/manufacturer's product name for the sample:
The fabricator/manufacturer designation for the sample:
The plant number:
A detailed description of where the material sample was collected: Belt Cut at Blue Diamond Victorville Plant
Where the material sample would have been placed if not sampled: Asphalt Paving
Primary Aggregate Nominal Size: 3/4 inch
The concrete mix design number:
Lot number: 1
Sublot number: 33
Aggregate Mix Number: 300154 R25

Test Results

Test 1 of 6

DIME Test ID: 2025-06-15-12-1
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Verified Date: 07/15/2025
Date Tested: 06/16/2025
Submitted By Organization: CT D08 - Barstow Field Laboratory 1
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: kaushalkumar.talati@dot.ca.gov
Organization Phone: (951) 840-8328
General Comments for this Test: Sample# 1
Test Result Compliance: complies
Additional Comments When Verified:
What type of gradation is being tested? HMA Gradation
Cumulative percent passing the 2 in. sieve no data
Cumulative percent passing the 1 1/2 in. sieve 100 %
Cumulative percent passing the 1 in. sieve 100 %
Cumulative percent passing the 3/4 in. sieve 99 %
Cumulative percent passing the 1/2 in. sieve 87 %
Cumulative percent passing the 3/8 in. sieve 76 %
Cumulative percent passing the #4 sieve 56 %
Cumulative percent passing the #8 sieve 44 %
Cumulative percent passing the #16 sieve 32 %
Cumulative percent passing the #30 sieve 21 %
Cumulative percent passing the #50 sieve 12 %
Cumulative percent passing the #100 sieve 6 %
Cumulative percent passing the #200 sieve 3.5 %

Test 2 of 6

DIME Test ID: 2025-06-15-12-2
Test Method: AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)
Verified Date: 07/15/2025
Date Tested: 06/16/2025
Submitted By Organization: CT D08 - Barstow Field Laboratory 1
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: kaushalkumar.talati@dot.ca.gov
Organization Phone: (951) 840-8328
General Comments for this Test: Sample# 1
Test Result Compliance: complies
Additional Comments When Verified:
Sand Equivalent 81

Test 3 of 6

DIME Test ID: 2025-06-15-12-3
Test Method: AASHTO T255-0: Standard Method of Test for Total Evaporable Moisture Content of Aggregate by Drying
Verified Date: 07/15/2025
Date Tested: 06/16/2025
Submitted By Organization: CT D08 - Barstow Field Laboratory 1
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: kaushalkumar.talati@dot.ca.gov
Organization Phone: (951) 840-8328
General Comments for this Test: Sample# 1
Test Result Compliance:
Additional Comments When Verified:
Total evaporable moisture content 1.5 %

Test 4 of 6

DIME Test ID: 2025-06-15-12-4
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Verified Date: 07/15/2025
Date Tested: 06/16/2025
Submitted By Organization: CT D08 - Barstow Field Laboratory 1
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: kaushalkumar.talati@dot.ca.gov
Organization Phone: (951) 840-8328
General Comments for this Test: Sample# 2
Test Result Compliance: complies
Additional Comments When Verified:
What type of gradation is being tested? HMA Gradation
Cumulative percent passing the 2 in. sieve no data
Cumulative percent passing the 1 1/2 in. sieve 100 %
Cumulative percent passing the 1 in. sieve 100 %
Cumulative percent passing the 3/4 in. sieve 99 %
Cumulative percent passing the 1/2 in. sieve 86 %
Cumulative percent passing the 3/8 in. sieve 74 %
Cumulative percent passing the #4 sieve 55 %
Cumulative percent passing the #8 sieve 43 %
Cumulative percent passing the #16 sieve 31 %
Cumulative percent passing the #30 sieve 21 %
Cumulative percent passing the #50 sieve 12 %
Cumulative percent passing the #100 sieve 6 %
Cumulative percent passing the #200 sieve 3.8 %

Test 5 of 6

DIME Test ID: 2025-06-15-12-5
Test Method: AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)
Verified Date: 07/15/2025
Date Tested: 07/15/2025
Submitted By Organization: CT D08 - Barstow Field Laboratory 1
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: kaushalkumar.talati@dot.ca.gov
Organization Phone: (951) 840-8328
General Comments for this Test: Sample# 2
Test Result Compliance: complies
Additional Comments When Verified:
Sand Equivalent 82

Test 6 of 6

DIME Test ID: 2025-06-15-12-6
Test Method: AASHTO T255-0: Standard Method of Test for Total Evaporable Moisture Content of Aggregate by Drying
Verified Date: 07/15/2025
Date Tested: 06/16/2025
Submitted By Organization: CT D08 - Barstow Field Laboratory 1
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: kaushalkumar.talati@dot.ca.gov
Organization Phone: (951) 840-8328
General Comments for this Test: Sample# 2
Test Result Compliance:
Additional Comments When Verified:
Total evaporable moisture content 1.6 %