Print Report | Back to Sample Detail

Sample Record for 2025-06-04-111

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 1000234 DEA: 112N1774 EFIS: 1123000036 QA Service Level: 1
DIST-CO-RTE-PM: 11-SD-15,52-Var
Work Description: MICRO-SURFACING, HMA, PAVEMENT MARKING AND SHOULDER BACKING.
Location Description: SAN DIEGO COUNTY AT VARIOUS LOCATIONS
Contractor Name: GRIFFITH COMPANY
Contractor Address: Unknown
Resident Engineer: Peris Salih Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2025-06-04-111
TL Number from the TL Form:
Sample Submitted By Organization: CT D11 - District 11 Materials Laboratory
Sample Organization Contact: (858) 518-8709
Type of Sample: Quality Assurance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 06/04/2025
Date that the sample was received by the laboratory/organization performing the testing: 06/06/2025
The quantity of what the sample constitutes: 4 boxes
A brief description of the sample: Plant Sample
From where was the sample collected: Supplier
Laboratory sample identification: 25-06-04-111-A
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Vulcan Otay

Material Information

HMA Type: RHMA-G
HMA Grading: 1/2 inch
Lot number:
Sublot number:
HMA Mix Number: 21218080SR MM
Binder content (%):
Virgin binder PG:
Design binder PG:
Binder Supplier:
RAP content (%):
WMA Additives:
Antistrip type:
Test results on following page(s): 2

Test Results

Test 1 of 2

DIME Test ID: 2025-06-04-111-1
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 07/11/2025
Date Tested: 07/10/2025
Submitted By Organization: CT D11 - District 11 Materials Laboratory
Organization Address: 4050 Taylor Street,
Organization City: San Diego
Organization State: CA
Organization Zipcode: 92110
Organization Email: benjamin.haney@dot.ca.gov
Organization Phone: (858) 688-1595
General Comments for this Test: Complies Target - 7.50% Tested 7.42%
Test Result Compliance: complies
Additional Comments When Verified:
What temperature unit is used? Celsius
Test procedure used? Method A
Mass of the specimen basket assembly 4029.2 g
Mass of the specimen and specimen basket assembly prior to ignition 5580.7 g
Mass of HMA Sample prior to ignition 1551.5 g
Corrected Asphalt Binder Content 7.42 %
Mass Loss 121.3 g
Mass of aggregate remaining after ignition 1430.2 g
Correction Factor (Percent by mass of HMA Specimen) 0.4 %
Moisture Content no data0 %
Temperature Compensation Factor no data0 %
Test Temperature 538 C

Test 2 of 2

DIME Test ID: 2025-06-04-111-2
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 07/11/2025
Date Tested: 07/10/2025
Submitted By Organization: CT D11 - District 11 Materials Laboratory
Organization Address: 4050 Taylor Street,
Organization City: San Diego
Organization State: CA
Organization Zipcode: 92110
Organization Email: benjamin.haney@dot.ca.gov
Organization Phone: (858) 688-1595
General Comments for this Test: Complies Target - 2.457 Tested 2.436 Within the 0.024 spec
Test Result Compliance: complies
Additional Comments When Verified:
Number of tests 1
What is the unit of measurement for theoretical density? US Units
Mass Determination Air
Method Performed Mechanical Agitation - Method A
Mass of container filled with water 7475.6 grams
Mass of oven-dry sample in air for Sample 1 1546.3 grams
Mass of container filled with the sample and water for Sample 1 8387.2 grams
Temperature of Water 77 °F
Specific Gravity for Sample 1 2.436
Theoretical maximum density at 25°C (77°F) 151.6 lb/ft^3