Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 1000026 DEA: 081E3404 EFIS: 0813000215
QA Service Level: 1
DIST-CO-RTE-PM: 08-RIV-15-15.9/20.3
Work Description: BONDED FIBER MATRIX, MINOR STAMPED CONC, ROCK MULCH & ROCK BLANKET.
Location Description: RIVERSIDE COUNTY IN WILDOMAR AND LAKE ELSINORE FROM 0.4 MILE SOUTH OF BUNDY CANYON ROAD TO 0.5 MILE NORTH OF GRUNDER DRIVE/FRANKLIN STREET
Contractor Name: DIVERSCAPE, INC. DBA DIVERSIFIED LANDSCAPE CO.
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown
DIME Sample ID: 2025-06-25-53
TL Number from the TL Form:
Sample Submitted By Organization: CT D08 - Fontana Field Testing Laboratory
Sample Organization Contact: 9512323690
Type of Sample: Acceptance
Type of Material: Soil
Sample Taken Date: 06/25/2025
Date that the sample was received by the laboratory/organization performing the testing: 06/25/2025
The quantity of what the sample constitutes: 22.7 kg
A brief description of the sample: Native Subgrade
From where was the sample collected: Job Site
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: CTM 231 TEST LOCATION
The fabricator's/manufacturer's product name for the sample:
The fabricator/manufacturer designation for the sample:
A detailed description of where the material sample was collected: I-15 SB to Bundy Canyon Rd Off-Ramp, Gore Area, Sta 871+24
Where the material sample would have been placed if not sampled:
DIME Test ID: 2025-06-25-53-1
Test Method: CTM 231-March 2013: Method of Test for Relative Compaction of Untreated and Treated Soils and Aggregates Using Nuclear Gages
Verified Date: 07/02/2025
Date Tested: 07/02/2025
Submitted By Organization: CT D08 - Fontana Field Testing Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: prakash.gowda@dot.ca.gov
Organization Phone: (951) 232-3690
General Comments for this Test: Density Spec 95%
Test Result Compliance: complies
Additional Comments When Verified:
|
Standard Count Density
|
1724 g/cc
|
|
Count or Density 1
|
986 g/cc
|
|
Count or Density 2
|
1089 g/cc
|
|
Count or Density 3
|
1221 g/cc
|
|
Standard Count Moisture
|
637 g/cc
|
|
Moisture Count 1
|
72 g/cc
|
|
Moisture Count 2
|
110 g/cc
|
|
Moisture Count 3
|
67 g/cc
|
|
Sum of Count or Density
|
3296 g/cc
|
|
Average of Count or Density
|
1099 g/cc
|
|
Sum of Moisture Count
|
249 g/cc
|
|
Average of Moisture Count
|
83 g/cc
|
|
Count Ratio Density
|
0.64
|
|
Count Ratio Moisture
|
0.13
|
|
Calculated Percent Relative Compaction
|
95.4 %
|
|
Reported Percent Relative Compaction
|
95 %
|
DIME Test ID: 2025-06-25-53-2
Test Method: CTM 216-June 2011: Method of Test for Relative Compaction of Untreated and Treated Soils and Aggregates
Verified Date: 07/02/2025
Date Tested: 06/26/2025
Submitted By Organization: CT D08 - Fontana Field Testing Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: prakash.gowda@dot.ca.gov
Organization Phone: (951) 232-3690
General Comments for this Test: Density Spec 95%
Test Result Compliance: complies
Additional Comments When Verified:
|
Is oversize material
|
No
|
|
In-place wet density
|
2.07
|
|
Highest adjust wet density
|
2.17
|
|
Relative compaction
|
95
|
|
% Moisture
|
no data
|
|
Optimum Moisture
|
no data
|
