Sample Record for 2025-06-20-44
Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project Information
Project ID: 1001001 DEA: 081N7704 EFIS: 0823000047
QA Service Level: 1
DIST-CO-RTE-PM: 08-SBD-173-L0.0/L7.7
Work Description: COLD PLANE AC PVMT, HMA (TYPE A), AND REPLACE AC SURFACING.
Location Description: SAN BERNARDINO COUNTY IN HESPERIA FROM ROUTE 138 TO 0.5 MILE EAST OF ARROWHEAD LAKE ROAD
Contractor Name: CALMEX ENGINEERING, INC.
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown
Sample Information
DIME Sample ID: 2025-06-20-44
TL Number from the TL Form:
Sample Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Sample Organization Contact: 213-792-4794
Type of Sample: Verification
Type of Material: Aggregate
Sample Taken Date: 06/20/2025
Date that the sample was received by the laboratory/organization performing the testing: 06/30/2025
The quantity of what the sample constitutes: 12 Bags of Bin Agg, 2 Bags Rap
A brief description of the sample: JMF 3/4" WMA-A-SP Rap 20%, EVO 0.35%
From where was the sample collected: Manufacturer
Laboratory sample identification: 0404A-25
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Vulcan Material Company
Material Information
Source Identification (SMARA, name of Pit or Job Site): 91-36-0022, 91-36-0046
The fabricator's/manufacturer's product name for the sample:
The fabricator/manufacturer designation for the sample:
The plant number:
A detailed description of where the material sample was collected: Belt Cut at Vulcan Oro Grande Plant
Where the material sample would have been placed if not sampled: Asphalt Paving
Primary Aggregate Nominal Size: 3/4 inch
The concrete mix design number: 220311W ORO VAL
Lot number:
Sublot number:
Aggregate Mix Number:
Test Results
Tests Assigned to this Sample
| DIME Test ID | Test Method | Assigned Date | Test Date | Assigned By | Assigned Lab | Test Comments | Assigned To |
| 2025-06-20-44-1 | AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis) | 07/01/2025 | Not scheduled | Satish Jain | CT D08 - Fontana Southern Regional Laboratory | | |
| 2025-06-20-44-2 | AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity) | 07/01/2025 | Not scheduled | Satish Jain | CT D08 - Fontana Southern Regional Laboratory | | |
| 2025-06-20-44-3 | AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity) | 07/01/2025 | Not scheduled | Satish Jain | CT D08 - Fontana Southern Regional Laboratory | | |
| 2025-06-20-44-4 | AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler) | 07/01/2025 | Not scheduled | Satish Jain | CT D08 - Fontana Southern Regional Laboratory | | |
| 2025-06-20-44-5 | AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent) | 07/01/2025 | Not scheduled | Satish Jain | CT D08 - Fontana Southern Regional Laboratory | | |
| 2025-06-20-44-6 | AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles) | 07/01/2025 | Not scheduled | Satish Jain | CT D08 - Fontana Southern Regional Laboratory | | |
| 2025-06-20-44-7 | AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles) | 07/01/2025 | Not scheduled | Satish Jain | CT D08 - Fontana Southern Regional Laboratory | | |
| 2025-06-20-44-8 | ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles) | 07/01/2025 | Not scheduled | Satish Jain | CT D08 - Fontana Southern Regional Laboratory | | |
| 2025-06-20-44-9 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | 07/01/2025 | Not scheduled | Satish Jain | CT D08 - Fontana Southern Regional Laboratory | | |
| 2025-06-20-44-10 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | 07/01/2025 | Not scheduled | Satish Jain | CT D08 - Fontana Southern Regional Laboratory | | |
136067136068136069136070136071136072136073136074136075136076
