Print Report | Back to Sample Detail

Sample Record for 2025-06-16-11

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 1000751 DEA: 060Y1704 EFIS: 0619000004 QA Service Level: 1
DIST-CO-RTE-PM: 06-KIN-41-0.0/15.5
Work Description: COLD PLANE AC PVMT, OVERLAY HMA AND RHMA.
Location Description: KINGS COUNTY NEAR KETTLEMAN CITY FROM THE KERN COUNTY LINE TO 0.8 MILE SOUTH OF ROUTE 5
Contractor Name: PAPICH CONSTRUCTION COMPANY, INC.
Contractor Address: Unknown
Resident Engineer: Oscar Sherrill Structure Rep.: Ramandeep Guraya

Sample Information

DIME Sample ID: 2025-06-16-11
TL Number from the TL Form:
Sample Submitted By Organization: CT D06 - Millbrook Field Laboratory
Sample Organization Contact: (559) 341-3953
Type of Sample: Acceptance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 06/16/2025
Date that the sample was received by the laboratory/organization performing the testing: 06/16/2025
The quantity of what the sample constitutes: 1525 tons
A brief description of the sample: 3/4 hma
From where was the sample collected: Manufacturer
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Sierra Pacific - Avenal

Material Information

HMA Type: Type A HMA
HMA Grading: 3/4 inch
Lot number: 1
Sublot number: 19
HMA Mix Number: L221154
Binder content (%):
Virgin binder PG:
Design binder PG:
Binder Supplier:
RAP content (%):
WMA Additives:
Antistrip type:
Test results on following page(s): 1

Test Results

Test 1 of 1

DIME Test ID: 2025-06-16-11-1
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 06/18/2025
Date Tested: 06/18/2025
Submitted By Organization: CT D06 - Millbrook Field Laboratory
Organization Address: 1352 W. Olive Ave,
Organization City: Fresno
Organization State: CA
Organization Zipcode: 93728
Organization Email: tomas.silva@dot.ca.gov
Organization Phone: (559) 417-5341
General Comments for this Test:
Test Result Compliance: does not comply
Additional Comments When Verified:
What temperature unit is used? Celsius
Test procedure used? Method A
Mass of the specimen basket assembly 2878 g
Mass of the specimen and specimen basket assembly prior to ignition 4984 g
Mass of HMA Sample prior to ignition 2106 g
Corrected Asphalt Binder Content 4.69 %
Mass Loss 123.4 g
Mass of aggregate remaining after ignition 1982.6 g
Correction Factor (Percent by mass of HMA Specimen) 1.04 %
Moisture Content no data0 %
Temperature Compensation Factor 0.13 %
Test Temperature 482 C