Print Report | Back to Sample Detail

Sample Record for 2025-06-09-42

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 1000682 DEA: 09379104 EFIS: 0919000005 QA Service Level: 1
DIST-CO-RTE-PM: 09-INY-395-91.6/100.8
Work Description: CONSTRUCT HMA, CURB RAMPS, AND ELECTRICAL SYSTEMS.
Location Description: INYO COUNTY AT AND NEAR BIG PINE FROM 0.1 MILE SOUTH OF ELNA ROAD TO SOUTH JUNCTION ROUTE 168
Contractor Name: ROAD AND HIGHWAY BUILDERS, LLC.
Contractor Address: P.O. Box 70846, Reno, N V, 89570
Resident Engineer: Adam Zumstein Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2025-06-09-42
TL Number from the TL Form: JMF-01
Sample Submitted By Organization: CT D09 - Bishop Field Laboratory
Sample Organization Contact: (760) 872-5211
Type of Sample: Verification
Type of Material: Hot Mix Asphalt
Sample Taken Date: 06/09/2025
Date that the sample was received by the laboratory/organization performing the testing: 06/09/2025
The quantity of what the sample constitutes: JMF Verification
A brief description of the sample: 1/2" HMA-A-SP PG58-34M R18
From where was the sample collected: Source
Laboratory sample identification: 4618
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Road & Highway Builders

Material Information

HMA Type: Type A HMA
HMA Grading: 1/2 inch
Lot number:
Sublot number:
HMA Mix Number:
Binder content (%):
Virgin binder PG:
Design binder PG:
Binder Supplier:
RAP content (%):
WMA Additives:
Antistrip type:

Test Results

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
2025-06-09-42-1AASHTO T209-22: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)06/11/2025Not scheduledDerek CarringtonCT D09 - Bishop Field LaboratoryDerek Carrington
2025-06-09-42-2AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)06/11/2025Not scheduledDerek CarringtonCT D09 - Bishop Field LaboratoryDerek Carrington
2025-06-09-42-3AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)06/11/2025Not scheduledDerek CarringtonCT D09 - Bishop Field LaboratoryDerek Carrington
2025-06-09-42-4AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)06/11/2025Not scheduledDerek CarringtonCT D09 - Bishop Field LaboratoryDerek Carrington
2025-06-09-42-5AASHTO T166-16: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Saturated Surface-Dry Specimens (Method A)06/11/2025Not scheduledDerek CarringtonCT D09 - Bishop Field LaboratoryDerek Carrington
2025-06-09-42-6AASHTO T324-14: Standard Method of Test for Hamburg Wheel-Track Testing of Compacted Asphalt Mixtures (Hamburg Wheel Track)06/11/2025Not scheduledDerek CarringtonCT D09 - Bishop Field LaboratoryDerek Carrington
2025-06-09-42-7AASHTO T30-19: Standard Method of Test for Mechanical Analysis of Extracted Aggregate (Mechanical Analysis)06/11/2025Not scheduledDerek CarringtonCT D09 - Bishop Field LaboratoryDerek Carrington