Print Report | Back to Sample Detail

Sample Record for 2025-06-08-7

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 1000234 DEA: 112N1774 EFIS: 1123000036 QA Service Level: 1
DIST-CO-RTE-PM: 11-SD-15,52-Var
Work Description: MICRO-SURFACING, HMA, PAVEMENT MARKING AND SHOULDER BACKING.
Location Description: SAN DIEGO COUNTY AT VARIOUS LOCATIONS
Contractor Name: GRIFFITH COMPANY
Contractor Address: Unknown
Resident Engineer: Peris Salih Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2025-06-08-7
TL Number from the TL Form:
Sample Submitted By Organization: CT D11 - District 11 Materials Laboratory
Sample Organization Contact: (858) 518-8709
Type of Sample: Quality Assurance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 06/08/2025
Date that the sample was received by the laboratory/organization performing the testing: 06/09/2025
The quantity of what the sample constitutes: 12 boxes
A brief description of the sample: JMFR
From where was the sample collected: Supplier
Laboratory sample identification: 25-06-08-7-JMFR
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Martin Marietta

Material Information

HMA Type: RHMA-G
HMA Grading: 3/4 inch
Lot number:
Sublot number:
HMA Mix Number: 23418080SR MM
Binder content (%):
Virgin binder PG:
Design binder PG:
Binder Supplier:
RAP content (%):
WMA Additives:
Antistrip type:
Test results on following page(s): 6

Test Results

Test 1 of 6

DIME Test ID: 2025-06-08-7-1
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 06/20/2025
Date Tested: 06/19/2025
Submitted By Organization: CT D11 - District 11 Materials Laboratory
Organization Address: 4050 Taylor Street,
Organization City: San Diego
Organization State: CA
Organization Zipcode: 92110
Organization Email: benjamin.haney@dot.ca.gov
Organization Phone: (858) 688-1595
General Comments for this Test: Complies Correction Factor - 0.13 Tested 7.97 % Target - 7.5% Save Material for HMA T30
Test Result Compliance: complies
Additional Comments When Verified:
What temperature unit is used? Fahrenheit
Test procedure used? Method A
Mass of the specimen basket assembly 3993.3 g
Mass of the specimen and specimen basket assembly prior to ignition 6036.1 g
Mass of HMA Sample prior to ignition 2042.8 g
Corrected Asphalt Binder Content 8.1 %
Mass Loss 165.4 g
Mass of aggregate remaining after ignition 1877.4 g
Correction Factor (Percent by mass of HMA Specimen) no data0 %
Moisture Content no data0 %
Temperature Compensation Factor no data0 %
Test Temperature 538 F

Test 2 of 6

DIME Test ID: 2025-06-08-7-2
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 06/12/2025
Date Tested: 06/10/2025
Submitted By Organization: CT D11 - District 11 Materials Laboratory
Organization Address: 4050 Taylor Street,
Organization City: San Diego
Organization State: CA
Organization Zipcode: 92110
Organization Email: benjamin.haney@dot.ca.gov
Organization Phone: (858) 688-1595
General Comments for this Test: Target - 2.456
Test Result Compliance: complies
Additional Comments When Verified:
Number of tests 1
What is the unit of measurement for theoretical density? US Units
Mass Determination Air
Method Performed Mechanical Agitation - Method A
Mass of container filled with water 7475.6 grams
Mass of oven-dry sample in air for Sample 1 2563.5 grams
Mass of container filled with the sample and water for Sample 1 8992.5 grams
Temperature of Water 77 °F
Specific Gravity for Sample 1 2.449
Theoretical maximum density at 25°C (77°F) 152.4 lb/ft^3

Test 3 of 6

DIME Test ID: 2025-06-08-7-3
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Verified Date: 06/12/2025
Date Tested: 06/10/2025
Submitted By Organization: CT D11 - District 11 Materials Laboratory
Organization Address: 4050 Taylor Street,
Organization City: San Diego
Organization State: CA
Organization Zipcode: 92110
Organization Email: benjamin.haney@dot.ca.gov
Organization Phone: (858) 688-1595
General Comments for this Test: Target - 4.0%
Test Result Compliance: complies
Additional Comments When Verified:
Bulk Specific Gravity 2.409
Bulk Specific Gravity 2 2.402
Bulk Specific Gravity 3 2.404
Average Bulk Specific Gravity 2.405

Test 4 of 6

DIME Test ID: 2025-06-08-7-4
Test Method: AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)
Verified Date: 06/24/2025
Date Tested: 06/23/2025
Submitted By Organization: CT D11 - District 11 Materials Laboratory
Organization Address: 4050 Taylor Street,
Organization City: San Diego
Organization State: CA
Organization Zipcode: 92110
Organization Email: benjamin.haney@dot.ca.gov
Organization Phone: (858) 688-1595
General Comments for this Test: Does not comply Target 4.0 Tested 2.0
Test Result Compliance: does not comply
Additional Comments When Verified:
Percent Air Voids 2 %

Test 5 of 6

DIME Test ID: 2025-06-08-7-5
Test Method: AASHTO T283-14: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage (Moisture Content)
Verified Date: 06/25/2025
Date Tested: 06/24/2025
Submitted By Organization: CT D11 - District 11 Materials Laboratory
Organization Address: 4050 Taylor Street,
Organization City: San Diego
Organization State: CA
Organization Zipcode: 92110
Organization Email: benjamin.haney@dot.ca.gov
Organization Phone: (858) 688-1595
General Comments for this Test: Does Not Comply Target WET > 70 psi and DRY > 100 psi TESTED WET - 53 psi and DRY- 73 psi
Test Result Compliance: does not comply
Additional Comments When Verified:
Unit system used? SI Units
Average Dry Tensile Strength 73 psi
Average Wet Tensile Strength 53 psi
Tensile Strength Ratio 0.73

Test 6 of 6

DIME Test ID: 2025-06-08-7-6
Test Method: CTM 389-19: Method of Test for Hamburg Wheel-Track Testing of Compacted Hot Mix Asphalt
Verified Date: 06/24/2025
Date Tested: 06/24/2025
Submitted By Organization: CT D11 - District 11 Materials Laboratory
Organization Address: 4050 Taylor Street,
Organization City: San Diego
Organization State: CA
Organization Zipcode: 92110
Organization Email: benjamin.haney@dot.ca.gov
Organization Phone: (858) 688-1595
General Comments for this Test: Complies Target <12.7 mm Tested Avg of 3.97 mm
Test Result Compliance: complies
Additional Comments When Verified:
Specimen Preparation Method no data
Test Temperature 122 F
Air Void Content for specimen A-1 no data
Air Void Content for specimen A-2 no data
Air Void Content for specimen B-1 no data
Air Void Content for specimen B-2 no data
Stripping Inflection Point (Wheel A) >15000
Stripping Inflection Point (Wheel B) >15000
Maximum impression at 5000 passes (left wheel) 1.69 mm
Maximum impression at 5000 passes (right wheel) 1.05 mm
Average impression at 5000 passes (left/right avg) 1.37 mm
Maximum impression at 10000 passes (left wheel) 3.41 mm
Maximum impression at 10000 passes (right wheel) 2.1 mm
Average impression at 10000 passes (left/right avg) 2.76 mm
Maximum impression at 15000 passes (left wheel) 5.01 mm
Maximum impression at 15000 passes (right wheel) 2.93 mm
Average impression at 15000 passes (left/right avg) 3.97 mm
Average impression at 20000 passes (left/right avg) no data
Average impression at 25000 passes (left/right avg) no data