Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 1000402 DEA: 11430384 EFIS: 1118000114
QA Service Level: 1
DIST-CO-RTE-PM: 11-SD-805-23.7/28.5
Work Description: REPLACE DRAINAGE, CONCRETE PAVEMENT, AND MODIFY ELECTRICAL SYSTEMS.
Location Description: SAN DIEGO COUNTY IN SAN DIEGO FROM 0.1 MILE NORTH OF ROUTE 805/52 SEPARATION TO ROUTE 5/805 SEPARATION
Contractor Name: HAZARD CONSTRUCTION ENGR, LLC
Contractor Address: 10529 VINE STREET, LAKESIDE, CA 92040
Resident Engineer: Karl Hartline Structure Rep.: Unknown
DIME Sample ID: 2025-06-04-37
TL Number from the TL Form: 164KBP
Sample Submitted By Organization: Kwik Bond Polymers
Sample Organization Contact: (760) 518-6064
Type of Sample: Quality Control
Type of Material: Polyester
Sample Taken Date: 06/04/2025
Date that the sample was received by the laboratory/organization performing the testing: 06/05/2025
The quantity of what the sample constitutes: 80 drums
A brief description of the sample: 1 gallon can / PPC 1121 RESIN
From where was the sample collected: Source
Laboratory sample identification: 25-019
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Kwik Bond Polymers, Benicia
DIME Test ID: 2025-06-04-37-1
Test Method: ASTM D2196-Feb15: Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational Viscometer
Verified Date: 07/24/2025
Date Tested: 07/17/2025
Submitted By Organization: Future Labs, LLC
Organization Address: 124 Lone Wolf Drive,
Organization City: Madison
Organization State: MS
Organization Zipcode: 39110
Organization Email: alexh@futurelabsllc.com
Organization Phone:
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
DIME Test ID: 2025-06-04-37-2
Test Method: ASTM D1475-Nov13: Standard Test Method For Density of Liquid Coatings, Inks, and Related Products
Verified Date: 07/24/2025
Date Tested: 07/17/2025
Submitted By Organization: Future Labs, LLC
Organization Address: 124 Lone Wolf Drive,
Organization City: Madison
Organization State: MS
Organization Zipcode: 39110
Organization Email: alexh@futurelabsllc.com
Organization Phone:
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
|
Density Units
|
pounds/gallons
|
|
Liquid Density (pounds per gallon)
|
9
|
DIME Test ID: 2025-06-04-37-3
Test Method: ASTM D638-Dec14: Standard Test Method for Tensile Properties of Plastics
Verified Date: 07/24/2025
Date Tested: 07/17/2025
Submitted By Organization: Future Labs, LLC
Organization Address: 124 Lone Wolf Drive,
Organization City: Madison
Organization State: MS
Organization Zipcode: 39110
Organization Email: alexh@futurelabsllc.com
Organization Phone:
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
|
Number of specimens tested
|
5
|
|
Conditioning procedure
|
18/25/50+5/70
|
|
Speed of testing
|
0.45 in/min
|
|
Sample 1 Width
|
0.508 in
|
|
Sample 1 Ultimate strength
|
2575.9 psi
|
|
Sample 1 Thickness
|
0.227 in
|
|
Sample 1 Area
|
0.1153 in^2
|
|
Sample 1 Ultimate Strength Actual
|
297 lbs
|
|
Sample 1 percent elongation
|
52 %
|
|
Sample 1 Time
|
no data0 MM:SS
|
|
Sample 2 Width
|
0.509 in
|
|
Sample 2 Thickness
|
0.243 in
|
|
Sample 2 Area
|
0.1237 in^2
|
|
Sample 2 Ultimate strength
|
2546.5 psi
|
|
Sample 2 Ultimate Strength Actual
|
315 lbs
|
|
Sample 2 percent elongation
|
51 %
|
|
Sample 2 Time
|
no data0 MM:SS
|
|
Sample 3 Width
|
0.509 in
|
|
Sample 3 Thickness
|
0.227 in
|
|
Sample 3 Area
|
0.1155 in^2
|
|
Sample 3 Ultimate strength
|
2597.4 psi
|
|
Sample 3 Ultimate Strength Actual
|
300 lbs
|
|
Sample 3 percent elongation
|
49 %
|
|
Sample 3 Time
|
no data0 MM:SS
|
|
Sample 4 Width
|
0.515 in
|
|
Sample 4 Thickness
|
0.235 in
|
|
Sample 4 Area
|
0.121 in^2
|
|
Sample 4 Ultimate strength
|
2628.1 psi
|
|
Sample 4 Ultimate Strength Actual
|
318 lbs
|
|
Sample 4 percent elongation
|
53 %
|
|
Sample 4 Time
|
no data0 MM:SS
|
|
Sample 5 Width
|
0.512 in
|
|
Sample 5 Thickness
|
0.234 in
|
|
Sample 5 Area
|
0.1198 in^2
|
|
Sample 5 Ultimate strength
|
2537.6 psi
|
|
Sample 5 Ultimate Strength Actual
|
304 lbs
|
|
Sample 5 percent elongation
|
50 %
|
|
Sample 5 Time
|
no data0 MM:SS
|
|
Ultimate Strength Average
|
2577 psi
|
|
Percent Elongation Average
|
51 %
|
DIME Test ID: 2025-06-04-37-4
Test Method: ASTM D2369-Jul10: Standard Test Method for Volatile Content of Coatings
Verified Date: 07/24/2025
Date Tested: 07/17/2025
Submitted By Organization: Future Labs, LLC
Organization Address: 124 Lone Wolf Drive,
Organization City: Madison
Organization State: MS
Organization Zipcode: 39110
Organization Email: alexh@futurelabsllc.com
Organization Phone:
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
|
Mean of two volatile content determination
|
45
|
DIME Test ID: 2025-06-04-37-5
Test Method: CTM 551-August 2012: Method of Test for Determining Suitability of Materials for Overlayment and Repair of Portland Cement Concrete Pavements and Structures
Verified Date: 07/24/2025
Date Tested: 06/10/2025
Submitted By Organization: Future Labs, LLC
Organization Address: 124 Lone Wolf Drive,
Organization City: Madison
Organization State: MS
Organization Zipcode: 39110
Organization Email: alexh@futurelabsllc.com
Organization Phone:
General Comments for this Test: Accepted based on supplier's results.
Test Result Compliance: complies
Additional Comments When Verified:
|
Curing history for Sample 1
|
24hr
|
|
Maximum applied load (P) for Sample 1
|
1296 lb
|
|
Span length for Sample 1
|
9 in
|
|
Break location for Sample 1
|
bond
|
|
Specimen defects/notes for Sample 1
|
no data
|
|
Surface type for Sample 1
|
SSD
|
|
Modulus of rupture (R) for Sample 1
|
648 psi
|
|
Curing history for Sample 2
|
24hr
|
|
Maximum applied load (P) for Sample 2
|
1084 lb
|
|
Span length for Sample 2
|
9 in
|
|
Break location for Sample 2
|
bond
|
|
Specimen defects/notes for Sample 2
|
no data
|
|
Surface type for Sample 2
|
SSD
|
|
Modulus of rupture (R) for Sample 2
|
542 psi
|
|
Curing history for Sample 3
|
24hr
|
|
Maximum applied load (P) for Sample 3
|
1182 lb
|
|
Span length for Sample 3
|
9 in
|
|
Break location for Sample 3
|
bond
|
|
Specimen defects/notes for Sample 3
|
no data
|
|
Surface type for Sample 3
|
SSD
|
|
Modulus of rupture (R) for Sample 3
|
591 psi
|
DIME Test ID: 2025-06-04-37-6
Test Method: SCAQMD 309-91-Feb93: Determination of Static Volatile Emissions
Verified Date: 07/24/2025
Date Tested: 07/17/2025
Submitted By Organization: Future Labs, LLC
Organization Address: 124 Lone Wolf Drive,
Organization City: Madison
Organization State: MS
Organization Zipcode: 39110
Organization Email: alexh@futurelabsllc.com
Organization Phone:
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
|
Diameter of lid
|
154.11 mm
|
|
Room Temperature
|
74 f
|
|
Tare weight
|
no data
|
|
Initial weight
|
100.01 grams
|
|
Weight at 5 minutes
|
99.88 grams
|
|
Weight at 10 minutes
|
99.75 grams
|
|
Weight at 15 minutes
|
99.62 grams
|
|
Weight at 20 minutes
|
99.49 grams
|
|
Weight at 25 minutes
|
99.37 grams
|
|
Weight at 30 minutes
|
99.24 grams
|
|
Final weight
|
99.24 grams
|
|
Total weight loss
|
0.77 grams
|
|
Calculated radius of gallon can lid in cm
|
7.706 cm
|
|
Lid Factor
|
53.603 m^2
|
|
Volatile emission
|
41.274 grams/m^2
|
