Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 1001249 DEA: 031N5504 EFIS: 0325000797
QA Service Level: 1
DIST-CO-RTE-PM: 03-BUT-70-35/36
Work Description: Major Damage Restoration
Location Description: BUT 70 Viaduct
Contractor Name: Steelhead Constructors (Justin Babcock)
Contractor Address: 2940 INNSBRUCK DRIVE, REDDING CA 96003
Resident Engineer: Adam Scardaci Structure Rep.: Adam Scardaci
DIME Sample ID: 2025-05-29-26
TL Number from the TL Form:
Sample Submitted By Organization: CT SC - 3667 - Chico
Sample Organization Contact: (530) 713-7871
Type of Sample: Quality Assurance
Type of Material: Concrete
Sample Taken Date: 05/29/2025
Date that the sample was received by the laboratory/organization performing the testing: 05/30/2025
The quantity of what the sample constitutes: 9 CY
A brief description of the sample: Bent 7 Right CIDH Wet Pile Mix
From where was the sample collected: Job Site
Laboratory sample identification:
Structure unique identifier: 12-0209
Structure name: Concow Sidehill Viaduct
The fabricator/manufacturer/facility name: Mathews Ready Mix
The concrete mix design number: 072335F25O
The truck number from where the sample was collected: 841
The batch plant ticket number from where the sample was collected: 16033286
Concrete batch plant: Mathews Readymix Oroville
The fabricator/manufacturer designation for the sample:
A detailed description of where the material sample was collected: Chute
Where the material sample would have been placed if not sampled: Bent 7 Right
From Lot No.:
Bag Lot No.:
DIME Test ID: 2025-05-29-26-1
Test Method: ASTM C39-18: Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
Verified Date: 07/12/2026
Date Tested: 07/07/2025
Submitted By Organization: CT D03 - Chico Field Laboratory
Organization Address: 2707 Notre Dame Boulevard,
Organization City: Chico
Organization State: CA
Organization Zipcode: 95928
Organization Email: bmckeehan@ghirardelliassoc.com
Organization Phone: (916) 799-4305
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Unit system used?
|
US Units
|
|
Number of specimens
|
3
|
|
Test performed
|
With no density determined
|
|
Average diameter of cylinder 1
|
4.00 in
|
|
Average diameter of cylinder 2
|
4.00 in
|
|
Capped in accordance with?
|
ASTM C617 - Sulfur Mortar Cap
|
|
Average diameter of cylinder 3
|
4.00 in
|
|
Cross sectional area of cylinder 1
|
12.57 in^2
|
|
Cross sectional area of cylinder 2
|
12.57 in^2
|
|
Cross sectional area of cylinder 3
|
12.57 in^2
|
|
Compressive strength (to nearest 10 psi)
|
5840 psi
|
|
Maximum load on cylinder 1
|
78430 lb
|
|
Maximum load on cylinder 2
|
67460 lb
|
|
Maximum load on cylinder 3
|
74220 lb
|
|
Compressive strength of cylinder 1
|
6239.5 psi
|
|
Type of fracture pattern of cylinder 1
|
2
|
|
Compressive strength of cylinder 2
|
5366.7 psi
|
|
Compressive strength of cylinder 3
|
5904.5 psi
|
|
Type of fracture pattern of cylinder 2
|
2
|
|
Type of fracture pattern of cylinder 3
|
2
|
|
Comment on any defect in either specimen or caps (Max 250 Characters)
|
no data
|
|
Correction factor for cylinder 1
|
1
|
|
Correction factor for cylinder 2
|
1
|
|
Correction factor for cylinder 3
|
1
|
|
Age of specimen
|
42 days
|
|
Age of specimen in hours
|
no data0 hours
|
