Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 1000269 DEA: 070W6604 EFIS: 0722000360
QA Service Level: 1
DIST-CO-RTE-PM: 07-LA-47,110,405,605-Var
Work Description: METHACRYLATE, POLYESTER OVERLAY AND JOINT SEALS.
Location Description: LOS ANGELES COUNTY AT VARIOUS LOCATIONS
Contractor Name: VELARDE CONCRETE CONSTRUCTION, INC
Contractor Address: Unknown
Resident Engineer: Joahnna Vergara Structure Rep.: Unknown
DIME Sample ID: 2025-05-13-79
TL Number from the TL Form: 161KBP
Sample Submitted By Organization: Kwik Bond Polymers
Sample Organization Contact: (760) 518-6064
Type of Sample: Quality Control
Type of Material: Polyester
Sample Taken Date: 05/13/2025
Date that the sample was received by the laboratory/organization performing the testing: 06/02/2025
The quantity of what the sample constitutes: 2 tankers
A brief description of the sample: 1 gallon can / PPC 1121 RESIN
From where was the sample collected: Source
Laboratory sample identification: 25-016
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Kwik Bond Polymers, Benicia
DIME Test ID: 2025-05-13-79-1
Test Method: ASTM D2196-Feb15: Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational Viscometer
Verified Date: 07/25/2025
Date Tested: 07/17/2025
Submitted By Organization: Future Labs, LLC
Organization Address: 124 Lone Wolf Drive,
Organization City: Madison
Organization State: MS
Organization Zipcode: 39110
Organization Email: alexh@futurelabsllc.com
Organization Phone:
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
DIME Test ID: 2025-05-13-79-2
Test Method: ASTM D1475-Nov13: Standard Test Method For Density of Liquid Coatings, Inks, and Related Products
Verified Date: 07/25/2025
Date Tested: 07/17/2025
Submitted By Organization: Future Labs, LLC
Organization Address: 124 Lone Wolf Drive,
Organization City: Madison
Organization State: MS
Organization Zipcode: 39110
Organization Email: alexh@futurelabsllc.com
Organization Phone:
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
|
Density Units
|
pounds/gallons
|
|
Liquid Density (pounds per gallon)
|
9
|
DIME Test ID: 2025-05-13-79-3
Test Method: ASTM D638-Dec14: Standard Test Method for Tensile Properties of Plastics
Verified Date: 07/25/2025
Date Tested: 07/11/2025
Submitted By Organization: Future Labs, LLC
Organization Address: 124 Lone Wolf Drive,
Organization City: Madison
Organization State: MS
Organization Zipcode: 39110
Organization Email: alexh@futurelabsllc.com
Organization Phone:
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
|
Number of specimens tested
|
6
|
|
Conditioning procedure
|
18/25/50+5/70
|
|
Speed of testing
|
0.45 in/min
|
|
Sample 1 Width
|
0.509 in
|
|
Sample 1 Ultimate strength
|
2721.8 psi
|
|
Sample 1 Thickness
|
0.228 in
|
|
Sample 1 Area
|
0.1161 in^2
|
|
Sample 1 Ultimate Strength Actual
|
316 lbs
|
|
Sample 1 percent elongation
|
58 %
|
|
Sample 1 Time
|
no data0 MM:SS
|
|
Sample 2 Width
|
0.51 in
|
|
Sample 2 Thickness
|
0.236 in
|
|
Sample 2 Area
|
0.1204 in^2
|
|
Sample 2 Ultimate strength
|
2599.7 psi
|
|
Sample 2 Ultimate Strength Actual
|
313 lbs
|
|
Sample 2 percent elongation
|
50 %
|
|
Sample 2 Time
|
no data0 MM:SS
|
|
Sample 3 Width
|
0.511 in
|
|
Sample 3 Thickness
|
0.224 in
|
|
Sample 3 Area
|
0.1145 in^2
|
|
Sample 3 Ultimate strength
|
2690 psi
|
|
Sample 3 Ultimate Strength Actual
|
308 lbs
|
|
Sample 3 percent elongation
|
54 %
|
|
Sample 3 Time
|
no data0 MM:SS
|
|
Sample 4 Width
|
0.511 in
|
|
Sample 4 Thickness
|
0.232 in
|
|
Sample 4 Area
|
0.1186 in^2
|
|
Sample 4 Ultimate strength
|
2723.4 psi
|
|
Sample 4 Ultimate Strength Actual
|
323 lbs
|
|
Sample 4 percent elongation
|
56 %
|
|
Sample 4 Time
|
no data0 MM:SS
|
|
Sample 5 Width
|
0.51 in
|
|
Sample 5 Thickness
|
0.228 in
|
|
Sample 5 Area
|
0.1163 in^2
|
|
Sample 5 Ultimate strength
|
2768.7 psi
|
|
Sample 5 Ultimate Strength Actual
|
322 lbs
|
|
Sample 5 percent elongation
|
60 %
|
|
Sample 5 Time
|
no data0 MM:SS
|
|
Sample 6 Width
|
0.51 in
|
|
Sample 6 Thickness
|
0.226 in
|
|
Sample 6 Area
|
0.1153 in^2
|
|
Sample 6 Ultimate strength
|
2896.8 psi
|
|
Sample 6 Ultimate Strength Actual
|
334 lbs
|
|
Sample 6 percent elongation
|
59 %
|
|
Sample 6 Time
|
no data0 MM:SS
|
|
Ultimate Strength Average
|
2733 psi
|
|
Percent Elongation Average
|
56 %
|
DIME Test ID: 2025-05-13-79-4
Test Method: ASTM D2369-Jul10: Standard Test Method for Volatile Content of Coatings
Verified Date: 07/25/2025
Date Tested: 07/17/2025
Submitted By Organization: Future Labs, LLC
Organization Address: 124 Lone Wolf Drive,
Organization City: Madison
Organization State: MS
Organization Zipcode: 39110
Organization Email: alexh@futurelabsllc.com
Organization Phone:
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
|
Mean of two volatile content determination
|
46
|
DIME Test ID: 2025-05-13-79-5
Test Method: CTM 551-August 2012: Method of Test for Determining Suitability of Materials for Overlayment and Repair of Portland Cement Concrete Pavements and Structures
Verified Date: 07/25/2025
Date Tested: 05/23/2025
Submitted By Organization: Future Labs, LLC
Organization Address: 124 Lone Wolf Drive,
Organization City: Madison
Organization State: MS
Organization Zipcode: 39110
Organization Email: alexh@futurelabsllc.com
Organization Phone:
General Comments for this Test: Accepted supplier's results.
Test Result Compliance: complies
Additional Comments When Verified:
|
Curing history for Sample 1
|
24hr
|
|
Maximum applied load (P) for Sample 1
|
1082 lb
|
|
Span length for Sample 1
|
9 in
|
|
Break location for Sample 1
|
bond
|
|
Specimen defects/notes for Sample 1
|
no data
|
|
Surface type for Sample 1
|
SSD
|
|
Modulus of rupture (R) for Sample 1
|
541 psi
|
|
Curing history for Sample 2
|
24hr
|
|
Maximum applied load (P) for Sample 2
|
1488 lb
|
|
Span length for Sample 2
|
9 in
|
|
Break location for Sample 2
|
bond
|
|
Specimen defects/notes for Sample 2
|
no data
|
|
Surface type for Sample 2
|
SSD
|
|
Modulus of rupture (R) for Sample 2
|
744 psi
|
|
Curing history for Sample 3
|
24hr
|
|
Maximum applied load (P) for Sample 3
|
1308 lb
|
|
Span length for Sample 3
|
9 in
|
|
Break location for Sample 3
|
bond
|
|
Specimen defects/notes for Sample 3
|
no data
|
|
Surface type for Sample 3
|
SSD
|
|
Modulus of rupture (R) for Sample 3
|
654 psi
|
DIME Test ID: 2025-05-13-79-6
Test Method: SCAQMD 309-91-Feb93: Determination of Static Volatile Emissions
Verified Date: 07/25/2025
Date Tested: 07/14/2025
Submitted By Organization: Future Labs, LLC
Organization Address: 124 Lone Wolf Drive,
Organization City: Madison
Organization State: MS
Organization Zipcode: 39110
Organization Email: alexh@futurelabsllc.com
Organization Phone:
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
|
Diameter of lid
|
153.19 mm
|
|
Room Temperature
|
74 f
|
|
Tare weight
|
no data
|
|
Initial weight
|
100 grams
|
|
Weight at 5 minutes
|
99.83 grams
|
|
Weight at 10 minutes
|
99.68 grams
|
|
Weight at 15 minutes
|
99.52 grams
|
|
Weight at 20 minutes
|
99.37 grams
|
|
Weight at 25 minutes
|
99.22 grams
|
|
Weight at 30 minutes
|
99.08 grams
|
|
Final weight
|
99.08 grams
|
|
Total weight loss
|
0.92 grams
|
|
Calculated radius of gallon can lid in cm
|
7.66 cm
|
|
Lid Factor
|
54.249 m^2
|
|
Volatile emission
|
49.909 grams/m^2
|
