Print Report | Back to Sample Detail

Sample Record for 2025-05-14-25

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 1000784 DEA: 07356504 EFIS: 0719000023 QA Service Level: 1
DIST-CO-RTE-PM: 07-VEN-126-R14.6/R34.5
Work Description: INSTALL DPP INFILTRATION AREA AND HOT MIX ASPHALT.
Location Description: VENTURA COUNTY IN AND NEAR FILLMORE AT VARIOUS LOCATIONS FROM HALLOCK DRIVE TO 0.1 MILE WEST OF THE LOS ANGELES COUNTY LINE
Contractor Name: ACCU CONSTRUCTION, INC.
Contractor Address: 14751 Plaza Drive, Suite L, Tustin, CA 92780, Tustin, CA, 92780
Resident Engineer: Ranjit singh Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2025-05-14-25
TL Number from the TL Form:
Sample Submitted By Organization: CT D07 - Materials Field Laboratory, Unit 1953
Sample Organization Contact: (213) 817-0387
Type of Sample: Acceptance
Type of Material: Soil
Sample Taken Date: 05/14/2025
Date that the sample was received by the laboratory/organization performing the testing: 05/14/2025
The quantity of what the sample constitutes: 113 sy
A brief description of the sample: 07-Ven-126 EB R18.7 Location 12
From where was the sample collected: Job Site
Laboratory sample identification: 25-1595
Structure unique identifier:
Structure name: 07-Ven-126 EB R18.7 Location 12
The fabricator/manufacturer/facility name: NA

Material Information

The fabricator's/manufacturer's product name for the sample: Aggregate Base
The fabricator/manufacturer designation for the sample: various location A.B
A detailed description of where the material sample was collected: Jobsite
Where the material sample would have been placed if not sampled: Jobsite
Test results on following page(s): 2

Test Results

Test 1 of 2

DIME Test ID: 2025-05-14-25-1
Test Method: CTM 231-March 2013: Method of Test for Relative Compaction of Untreated and Treated Soils and Aggregates Using Nuclear Gages
Verified Date: 05/15/2025
Date Tested: 05/15/2025
Submitted By Organization: CT D07 - Materials Field Laboratory, Unit 1953
Organization Address: 1940 South Workman Mill Road,
Organization City: Whittier
Organization State: CA
Organization Zipcode: 90601
Organization Email: chad.chotibhongs@dot.ca.gov
Organization Phone: (213) 407-6963
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Standard Count Density 2171 g/cc
Count or Density 1 2.04 g/cc
Count or Density 2 2.05 g/cc
Count or Density 3 2.02 g/cc
Standard Count Moisture 657 g/cc
Moisture Count 1 0.16 g/cc
Moisture Count 2 0.16 g/cc
Moisture Count 3 0.14 g/cc
Sum of Count or Density 6.11 g/cc
Average of Count or Density 2.04 g/cc
Sum of Moisture Count 0.46 g/cc
Average of Moisture Count 0.15 g/cc
Calculated Percent Relative Compaction 94.7 %
Reported Percent Relative Compaction 95 %

Test 2 of 2

DIME Test ID: 2025-05-14-25-2
Test Method: CTM 216-June 2011: Method of Test for Relative Compaction of Untreated and Treated Soils and Aggregates
Verified Date: 05/15/2025
Date Tested: 05/15/2025
Submitted By Organization: CT D07 - Materials Field Laboratory, Unit 1953
Organization Address: 1940 South Workman Mill Road,
Organization City: Whittier
Organization State: CA
Organization Zipcode: 90601
Organization Email: chad.chotibhongs@dot.ca.gov
Organization Phone: (213) 407-6963
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Is oversize material No
In-place wet density 2.04
Highest adjust wet density 2.15
Relative compaction 95
% Moisture 8.1 %
Optimum Moisture 10.1 %