Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 995255 DEA: 041J9604 EFIS: 0414000403
QA Service Level: 1
DIST-CO-RTE-PM: 04-MRN-1-22.8/33.0,45.0/50.5
Work Description: COLD PLANE, RHMA, HMA, MGS, CURB RAMPS, SIDEWALKS, AND CULVERTS.
Location Description: MARIN COUNTY IN AND NEAR POINT REYES STATION FROM FIVE BROOKS TO 1.9 MILES NORTH OF CYPRESS ROAD AND IN AND NEAR TOMALES FROM 0.2 MILES SOUTH OF TOMALES TO 4.4 MILES NORTH OF TOMALES
Contractor Name: O.C. JONES & SONS, INC.
Contractor Address: Unknown
Resident Engineer: Andrew Wong Structure Rep.: Jeremy Light
DIME Sample ID: 2025-05-07-40
TL Number from the TL Form:
Sample Submitted By Organization: CT D04 - Petaluma Field Laboratory
Sample Organization Contact: (510) 385-6841
Type of Sample: Quality Assurance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 05/07/2025
Date that the sample was received by the laboratory/organization performing the testing: 05/08/2025
The quantity of what the sample constitutes: 750 Tons
A brief description of the sample: 1/2" hma wma
From where was the sample collected: Manufacturer
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: BoDean Company
DIME Test ID: 2025-05-07-40-1
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 05/12/2025
Date Tested: 05/08/2025
Submitted By Organization: CT D04 - Petaluma Field Laboratory
Organization Address: 5675 Gibraltar Drive,
Organization City: Pleasanton
Organization State: CA
Organization Zipcode: 94588
Organization Email: glenn.cea@dot.ca.gov
Organization Phone: (510) 385-6841
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
|
What temperature unit is used?
|
Celsius
|
|
Test procedure used?
|
Method A
|
|
Mass of HMA Sample prior to ignition
|
1615.9 g
|
|
Corrected Asphalt Binder Content
|
4.86 %
|
|
Mass Loss
|
93.5 g
|
|
Correction Factor (Percent by mass of HMA Specimen)
|
0.74 %
|
|
Moisture Content
|
no data0 %
|
|
Temperature Compensation Factor
|
0.19 %
|
|
Test Temperature
|
482 C
|