Print Report | Back to Sample Detail

Sample Record for 2025-03-21-42

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 1000314 DEA: 042Y5804 EFIS: 0423000130 QA Service Level: 1
DIST-CO-RTE-PM: 04-SON-1-30.5/32.0
Work Description: COLD PLANE ASPHALT CONCRETE PAVEMENT AND OVERLAY WITH HMA.
Location Description: SONOMA COUNTY AT FORT ROSS FROM 2.5 MILES SOUTH OF FORT ROSS ROAD TO 1.0 MILE SOUTH OF FORT ROSS ROAD
Contractor Name: O.C. JONES & SONS, INC.
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2025-03-21-42
TL Number from the TL Form:
Sample Submitted By Organization: CT D04 - Petaluma Field Laboratory
Sample Organization Contact: 510-385-7413
Type of Sample: Quality Assurance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 03/21/2025
Date that the sample was received by the laboratory/organization performing the testing: 03/24/2025
The quantity of what the sample constitutes: 750 Tons
A brief description of the sample: 3/4" hma wma
From where was the sample collected: Manufacturer
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: BoDean Company

Material Information

HMA Type: Type A HMA
HMA Grading: 3/4 inch
Lot number: 1
Sublot number: 1
HMA Mix Number: 700SPW16
Binder content (%):
Virgin binder PG:
Design binder PG:
Binder Supplier:
RAP content (%):
WMA Additives:
Antistrip type:
Test results on following page(s): 4

Test Results

Test 1 of 4

DIME Test ID: 2025-03-21-42-1
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 05/06/2025
Date Tested: 03/26/2025
Submitted By Organization: CT D04 - Petaluma Field Laboratory
Organization Address: 3401 Regatta Blvd.,
Organization City: Richmond
Organization State: CA
Organization Zipcode: 94804
Organization Email: ignacio.arechiga@dot.ca.gov
Organization Phone: (510) 385-7413
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
What temperature unit is used? Celsius
Test procedure used? Method A
Mass of HMA Sample prior to ignition 2000.2 g
Corrected Asphalt Binder Content 4.84 %
Mass Loss 120 g
Correction Factor (Percent by mass of HMA Specimen) 1.01 %
Moisture Content no data0 %
Temperature Compensation Factor 0.15 %
Test Temperature 482 C

Test 2 of 4

DIME Test ID: 2025-03-21-42-2
Test Method: AASHTO T209-22: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 05/06/2025
Date Tested: 03/26/2025
Submitted By Organization: CT D04 - Petaluma Field Laboratory
Organization Address: 3401 Regatta Blvd.,
Organization City: Richmond
Organization State: CA
Organization Zipcode: 94804
Organization Email: ignacio.arechiga@dot.ca.gov
Organization Phone: (510) 385-7413
General Comments for this Test:
Test Result Compliance: not applicable
Additional Comments When Verified:
Number of Samples 2
What is the unit of measurement for theoretical density? SI Units
Mass Determination Air
Method Performed Mechanical Agitation - Method A
Mass of container filled with water 1 7391 grams
Mass of oven-dry sample in air for Sample 1 2526.5 grams
Mass of container filled with the sample and water for Sample 1 8902 grams
Mass of container filled with water 2 7391 grams
Mass of oven-dry sample in air for Sample 2 2531.2 grams
Mass of container filled with the sample and water for Sample 2 8906.2 grams
Temperature of Water 77 °F
Specific Gravity for Sample 1 2.488
Specific Gravity for Sample 2 2.491
Average Specific Gravity 2.49
Theoretical maximum density at 25°C (77°F) 2483 kg/m^3

Test 3 of 4

DIME Test ID: 2025-03-21-42-3
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Verified Date: 05/19/2025
Date Tested: 04/01/2025
Submitted By Organization: CT D04 - Petaluma Field Laboratory
Organization Address: 3401 Regatta Blvd.,
Organization City: Richmond
Organization State: CA
Organization Zipcode: 94804
Organization Email: ignacio.arechiga@dot.ca.gov
Organization Phone: (510) 385-7413
General Comments for this Test:
Test Result Compliance: not applicable
Additional Comments When Verified:
Bulk Specific Gravity 2.448
Bulk Specific Gravity 2 2.452
Bulk Specific Gravity 3 2.455
Average Bulk Specific Gravity 2.452

Test 4 of 4

DIME Test ID: 2025-03-21-42-4
Test Method: AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)
Verified Date: 05/19/2025
Date Tested: 04/01/2025
Submitted By Organization: CT D04 - Petaluma Field Laboratory
Organization Address: 3401 Regatta Blvd.,
Organization City: Richmond
Organization State: CA
Organization Zipcode: 94804
Organization Email: ignacio.arechiga@dot.ca.gov
Organization Phone: (510) 385-7413
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Percent Air Voids 1.7 %
Percent Air Voids 2 1.5 %
Percent Air Voids 3 1.4 %
Average Percent Air Voids 1.5 %
Average Core Density 98.5 %