Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 995239 DEA: 060W9104 EFIS: 0618000011
QA Service Level: 1
DIST-CO-RTE-PM: 06-TUL-99-27.6/30.6
Work Description: HMA, RHMA-G, JOINTED PLAIN CONC PVMT (RSC) AND STBB (TYPE M).
Location Description: TULARE COUNTY IN AND NEAR TULARE FROM PAIGE AVENUE OVERCROSSING TO PROSPERITY AVENUE OVERCROSSING.
Contractor Name: GRANITE CONSTRUCTION COMPANY
Contractor Address: Unknown
Resident Engineer: Amir Zamanian Structure Rep.: Albert Heredia
DIME Sample ID: 2025-05-01-14
TL Number from the TL Form:
Sample Submitted By Organization: CT D06 - Visalia Field Laboratory
Sample Organization Contact: (559) 974-1304
Type of Sample: Quality Assurance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 05/01/2025
Date that the sample was received by the laboratory/organization performing the testing: 05/02/2025
The quantity of what the sample constitutes: 10 Boxes
A brief description of the sample: HMA Type A
From where was the sample collected: Source
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: MMV - Visalia
DIME Test ID: 2025-05-01-14-1
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Verified Date: 05/05/2025
Date Tested: 05/02/2025
Submitted By Organization: CT D06 - Visalia Field Laboratory
Organization Address: 8530 W Roosevelt Ave,
Organization City: Visalia
Organization State: CA
Organization Zipcode: 93291
Organization Email: paul.klinker@dot.ca.gov
Organization Phone: (559) 974-1304
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
|
Bulk Specific Gravity
|
2.524
|
|
Bulk Specific Gravity 2
|
2.505
|
|
Average Bulk Specific Gravity
|
2.515
|
DIME Test ID: 2025-05-01-14-2
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 05/05/2025
Date Tested: 05/02/2025
Submitted By Organization: CT D06 - Visalia Field Laboratory
Organization Address: 8530 W Roosevelt Ave,
Organization City: Visalia
Organization State: CA
Organization Zipcode: 93291
Organization Email: paul.klinker@dot.ca.gov
Organization Phone: (559) 974-1304
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
|
What temperature unit is used?
|
Celsius
|
|
Test procedure used?
|
Method A
|
|
Mass of HMA Sample prior to ignition
|
2018 g
|
|
Corrected Asphalt Binder Content
|
4.64 %
|
|
Mass Loss
|
101.5 g
|
|
Correction Factor (Percent by mass of HMA Specimen)
|
0.25 %
|
|
Moisture Content
|
no data0 %
|
|
Temperature Compensation Factor
|
0.14 %
|
|
Test Temperature
|
538 C
|