Print Report | Back to Sample Detail

Sample Record for 2025-04-17-64

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 88888 DEA: SMTL-STOCK EFIS: SMTL-STOCK QA Service Level:
DIST-CO-RTE-PM: 59---
Work Description: Special project for SMTL stock material. Object Code: 1025. J2 DEA: 912680.
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2025-04-17-64
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Sample Organization Contact: (530) 329-6527
Type of Sample: Quality Assurance
Type of Material: SMTL TM2 - Type B Elastomeric Joint Seal
Sample Taken Date: 04/17/2025
Date that the sample was received by the laboratory/organization performing the testing: 04/28/2025
The quantity of what the sample constitutes: 300'
A brief description of the sample: 5" Joint Seal
From where was the sample collected: Manufacturer
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Watson Bowman Acme

Material Information

Mfg. Lot Number(s): 0925184
Manufacturer(s): Watson Bowman Acme
Temperature: 72
Humidity: 50
Comments:
Joint Seal Size: 5
Test results on following page(s): 7

Test Results

Test 1 of 7

DIME Test ID: 2025-04-17-64-1
Test Method: ASTM D2240-15r21: Standard Test Method for Rubber Property - Durometer Hardness
Verified Date: 06/12/2025
Date Tested: 06/02/2025
Submitted By Organization: Phoenix National Lab
Organization Address: 941 South Park Lane, Suite 102 ,
Organization City: Tempe
Organization State: AZ
Organization Zipcode: 85281
Organization Email: kyle@pnltest.com
Organization Phone: 602-431-8887
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Temperature 72 f
Humidity 50 %
Reading #1 54
Reading #2 53
Reading #3 54
Reading #4 54
Reading #5 53
Mean 54.1

Test 2 of 7

DIME Test ID: 2025-04-17-64-2
Test Method: ASTM D412-16r21: Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers-Tension
Verified Date: 06/12/2025
Date Tested: 06/02/2025
Submitted By Organization: Phoenix National Lab
Organization Address: 941 South Park Lane, Suite 102 ,
Organization City: Tempe
Organization State: AZ
Organization Zipcode: 85281
Organization Email: kyle@pnltest.com
Organization Phone: 602-431-8887
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Number of specimens tested 3
Unit of the Ultimate Tensile Values psi
UTM NA
Humidity 50 %
Temperature 72 f
Sample 1 Median Thickness 0.099 in
Sample 1 Thickness all Within 0.003 inch? Yes
Sample 1 Ultimate Tensile 2378 psi
Sample 1 Elongation (350% Min) Pass
Sample 2 Median Thickness 0.128 in
Sample 2 Thickness all Within 0.003 inch? Yes
Sample 2 Ultimate Tensile 2250 psi
Sample 2 Elongation (350% Min) Pass
Sample 3 Median Thickness 0.113 in
Sample 3 Thickness all Within 0.003 inch? Yes
Sample 3 Ultimate Tensile 2404 psi
Sample 3 Elongation (350% Min) Pass
Median of the Ultimate Tensile Values 2378 psi

Test 3 of 7

DIME Test ID: 2025-04-17-64-3
Test Method: CTM 673-July 2012: Method of Determining Movement Rating of Type B1 and B2 Preformed Elastomeric Joint Seals
Verified Date: 06/12/2025
Date Tested: 06/12/2025
Submitted By Organization: Phoenix National Lab
Organization Address: 941 South Park Lane, Suite 102 ,
Organization City: Tempe
Organization State: AZ
Organization Zipcode: 85281
Organization Email: kyle@pnltest.com
Organization Phone: 602-431-8887
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
UTM NA
Temperature 72 f
Humidity 50 %
Spec Minimum Uncompressed Width 5 in
Area (5 Times of the Height of Contact Face) 25.366 sqin
Half of the Spec Minimum Uncompressed Width no data0 in
85 Percent of the Spec Minimum Uncompressed Width 4.338 in
3 Times of the Area no data0 sqin
4 Times of the Load at W1 no data0 lbs
W1 (US Units) 4.338 in
W1 (Metric Units) 110.185 millimeters
W2 (US Units) 2.218 in
W2 (Metric Units) 56.3372 millimeters
Satisfactory of MR of (US Units) 2.12 in
Satisfactory of MR of (Metric Units) 53.848 millimeters
Optional W1 Measurement 1 no data0 in
Optional W1 Measurement 2 no data0 sqin

Test 4 of 7

DIME Test ID: 2025-04-17-64-4
Test Method: ASTM D2628-91r16: Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements
Verified Date: 06/12/2025
Date Tested: 06/02/2025
Submitted By Organization: Phoenix National Lab
Organization Address: 941 South Park Lane, Suite 102 ,
Organization City: Tempe
Organization State: AZ
Organization Zipcode: 85281
Organization Email: kyle@pnltest.com
Organization Phone: 602-431-8887
General Comments for this Test: cold
Test Result Compliance: complies
Additional Comments When Verified:
High or low tempurature Low
Temperature 72 f
Humidity 50 %
Temp Recovery (22 hrs at -20F) Size Before (Height of Contact Face ) 5 in
Temp Recovery (22 hrs at -20F) Size After (Recovered Contact Face ) 4.394 in
Percent Recovery 88 %

Test 5 of 7

DIME Test ID: 2025-04-17-64-5
Test Method: ASTM D2628-91r16: Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements
Verified Date: 06/12/2025
Date Tested: 06/02/2025
Submitted By Organization: Phoenix National Lab
Organization Address: 941 South Park Lane, Suite 102 ,
Organization City: Tempe
Organization State: AZ
Organization Zipcode: 85281
Organization Email: kyle@pnltest.com
Organization Phone: 602-431-8887
General Comments for this Test: hot
Test Result Compliance: complies
Additional Comments When Verified:
High or low tempurature High
Temperature 72 f
Humidity 50 %
Temp Recovery (22 hrs at -20F) Size Before (Height of Contact Face ) 5 in
Temp Recovery (22 hrs at -20F) Size After (Recovered Contact Face ) 4.895 in
Percent Recovery 98 %

Test 6 of 7

DIME Test ID: 2025-04-17-64-6
Test Method: ASTM D471-16r21: Standard Test Method for Rubber Property - Effect of Liquids
Verified Date: 06/12/2025
Date Tested: 06/02/2025
Submitted By Organization: Phoenix National Lab
Organization Address: 941 South Park Lane, Suite 102 ,
Organization City: Tempe
Organization State: AZ
Organization Zipcode: 85281
Organization Email: kyle@pnltest.com
Organization Phone: 602-431-8887
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Oil Swell Percentage 31.9 %

Test 7 of 7

DIME Test ID: 2025-04-17-64-7
Test Method: SMTL BILST-06: (Neoprene Verification) Bilstein Test
Verified Date: 06/12/2025
Date Tested: 06/02/2025
Submitted By Organization: Phoenix National Lab
Organization Address: 941 South Park Lane, Suite 102 ,
Organization City: Tempe
Organization State: AZ
Organization Zipcode: 85281
Organization Email: kyle@pnltest.com
Organization Phone: 602-431-8887
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Result Pass