Print Report | Back to Sample Detail

Sample Record for 2025-04-22-22

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 995239 DEA: 060W9104 EFIS: 0618000011 QA Service Level: 1
DIST-CO-RTE-PM: 06-TUL-99-27.6/30.6
Work Description: HMA, RHMA-G, JOINTED PLAIN CONC PVMT (RSC) AND STBB (TYPE M).
Location Description: TULARE COUNTY IN AND NEAR TULARE FROM PAIGE AVENUE OVERCROSSING TO PROSPERITY AVENUE OVERCROSSING.
Contractor Name: GRANITE CONSTRUCTION COMPANY
Contractor Address: Unknown
Resident Engineer: Amir Zamanian Structure Rep.: Albert Heredia

Sample Information

DIME Sample ID: 2025-04-22-22
TL Number from the TL Form:
Sample Submitted By Organization: CT D06 - Visalia Field Laboratory
Sample Organization Contact: (559) 974-1304
Type of Sample: Quality Assurance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 04/22/2025
Date that the sample was received by the laboratory/organization performing the testing: 04/23/2025
The quantity of what the sample constitutes: 10 Boxes
A brief description of the sample: HMA Type A
From where was the sample collected: Source
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: MMV - Visalia

Material Information

HMA Type: Type A HMA
HMA Grading: 3/4 inch
Lot number: 1
Sublot number: 2
HMA Mix Number: 21J003
Binder content (%):
Virgin binder PG:
Design binder PG:
Binder Supplier:
RAP content (%):
WMA Additives:
Antistrip type:
Test results on following page(s): 4

Test Results

Test 1 of 4

DIME Test ID: 2025-04-22-22-1
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 04/23/2025
Date Tested: 04/23/2025
Submitted By Organization: CT D06 - Visalia Field Laboratory
Organization Address: 8530 W Roosevelt Ave,
Organization City: Visalia
Organization State: CA
Organization Zipcode: 93291
Organization Email: paul.klinker@dot.ca.gov
Organization Phone: (559) 974-1304
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
What temperature unit is used? Celsius
Test procedure used? Method A
Mass of HMA Sample prior to ignition 2016 g
Corrected Asphalt Binder Content 5.11 %
Mass Loss 111 g
Correction Factor (Percent by mass of HMA Specimen) 0.25 %
Moisture Content no data0 %
Temperature Compensation Factor 0.15 %
Test Temperature 538 C

Test 2 of 4

DIME Test ID: 2025-04-22-22-2
Test Method: AASHTO T209-22: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 04/23/2025
Date Tested: 04/23/2025
Submitted By Organization: CT D06 - Visalia Field Laboratory
Organization Address: 8530 W Roosevelt Ave,
Organization City: Visalia
Organization State: CA
Organization Zipcode: 93291
Organization Email: paul.klinker@dot.ca.gov
Organization Phone: (559) 974-1304
General Comments for this Test:
Test Result Compliance: not applicable
Additional Comments When Verified:
Number of Samples 1
What is the unit of measurement for theoretical density? SI Units
Mass Determination Air
Method Performed Mechanical Agitation - Method A
Mass of container filled with water 1 7318.5 grams
Mass of oven-dry sample in air for Sample 1 2533 grams
Mass of container filled with the sample and water for Sample 1 8902.8 grams
Temperature of Water 77 °F
Specific Gravity for Sample 1 2.67
Theoretical maximum density at 25°C (77°F) 2662 kg/m^3

Test 3 of 4

DIME Test ID: 2025-04-22-22-3
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Submitted By Organization: CT D06 - Visalia Field Laboratory
Organization Address: 8530 West Roosevelt Avenue,
Organization City: Visalia
Organization State: CA
Organization Zipcode: 93291
Organization Email: paul.klinker@dot.ca.gov
Organization Phone: (559) 974-1304
This test has been superseded on 04/25/2025. The corrected test ID is: 2025-04-22-22-4
Reason: corrected

Test 4 of 4

DIME Test ID: 2025-04-22-22-4
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Verified Date: 05/01/2025
Date Tested: 04/25/2025
Submitted By Organization: CT D06 - Visalia Field Laboratory
Organization Address: 8530 W Roosevelt Ave,
Organization City: Visalia
Organization State: CA
Organization Zipcode: 93291
Organization Email: paul.klinker@dot.ca.gov
Organization Phone: (559) 974-1304
General Comments for this Test:
The test was superseded from test ID: 2025-04-22-22-3
Test Result Compliance:
Additional Comments When Verified:
Bulk Specific Gravity 2.58