Print Report | Back to Sample Detail

Sample Record for 2025-04-15-43

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 1000478 DEA: 020K6404 EFIS: 0223000189 QA Service Level: 1
DIST-CO-RTE-PM: 02-SIS-97-18.0/22.4
Work Description: CONSTRUCT WILDLIFE OVERPASS, INSTALL CULVERT, AND INSTALL FENCING.
Location Description: SISKIYOU COUNTY NEAR GRASS LAKE FROM 1.4 MILES NORTH OF DEER MOUNTAIN ROAD TO 0.6 MILE NORTH OF GRASS LAKE REST AREA
Contractor Name: MCCUEN CONSTRUCTION, INC.
Contractor Address: 3269 Swetzer Road, Loomis, CA 95650
Resident Engineer: Austin Henry Structure Rep.: Carlos Paz

Sample Information

DIME Sample ID: 2025-04-15-43
TL Number from the TL Form:
Sample Submitted By Organization: Con-Fab California Corporation - Lathrop
Sample Organization Contact: (209) 249-4700
Type of Sample: Quality Control
Type of Material: Aggregate
Sample Taken Date: 04/15/2025
Date that the sample was received by the laboratory/organization performing the testing: 04/15/2025
The quantity of what the sample constitutes: 1 Bucket of 1/2", 1 Bucket of 3/8", One Bucket of Sand
A brief description of the sample: 1 Bucket of 1/2", 1 Bucket of 3/8", One Bucket of Sand
From where was the sample collected: Fabricator
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Con-Fab California, LLC

Material Information

Source Identification (SMARA, name of Pit or Job Site): Confab California Lathrop
The fabricator's/manufacturer's product name for the sample:
The fabricator/manufacturer designation for the sample:
The plant number:
A detailed description of where the material sample was collected: Stockpile @ Plant
Where the material sample would have been placed if not sampled:
Primary Aggregate Nominal Size: 1/2 inch
The concrete mix design number:
Lot number:
Sublot number:
Aggregate Mix Number:

Test Results

Test 1 of 1

DIME Test ID: 2025-04-15-43-1
Test Method: ASTM C566-19: Standard Test Method for Total Evaporable Moisture Content of Aggregate by Drying
Verified Date: 04/21/2025
Date Tested: 04/15/2025
Submitted By Organization: Con-Fab California Corporation - Lathrop
Organization Address: 1910 Lathrop Road,
Organization City: Lathrop
Organization State: CA
Organization Zipcode: 95330
Organization Email: dannyc@confabca.com
Organization Phone: (209) 249-4717
General Comments for this Test: Sand 2.60% 1/2": 0.30% 3/8": 0 .30%
Test Result Compliance:
Additional Comments When Verified:
Total evaporable moisture content 2.6 %