Print Report | Back to Sample Detail

Sample Record for 2025-02-25-9

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 1000230 DEA: 081N2204 EFIS: 0822000120 QA Service Level: 1
DIST-CO-RTE-PM: 08-SBD-66,215-Var
Work Description: FURNISH & PLACE POLYESTER CONC OVERLAY, FURNISH BR DECK TREATMENT MTL.
Location Description: SAN BERNARDINO COUNTY AT VARIOUS LOCATIONS
Contractor Name: PETERSON-CHASE GENERAL ENGINEERING CONSTRUCTION, INC.
Contractor Address: Unknown
Resident Engineer: Jason Shbaita Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2025-02-25-9
TL Number from the TL Form: Sacramento Caltrans lab
Sample Submitted By Organization: Kwik Bond Polymers
Sample Organization Contact: (760) 518-6064
Type of Sample: Quality Control
Type of Material: Polyester
Sample Taken Date: 02/25/2025
Date that the sample was received by the laboratory/organization performing the testing: 02/26/2025
The quantity of what the sample constitutes: 9 tankers
A brief description of the sample: 1 gallon can / PPC 1121 RESIN
From where was the sample collected: Source
Laboratory sample identification: 000152KBP
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Kwik Bond Polymers, Benicia

Material Information

Mfg. Lot Number(s): AZ5B00222S
Batch number: AZ5B00222S
Mix number: AZ5B000222S
Test results on following page(s): 5

Test Results

Test 1 of 5

DIME Test ID: 2025-02-25-9-1
Test Method: ASTM D2196-Feb15: Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational Viscometer
Verified Date: 05/01/2025
Date Tested: 04/28/2025
Submitted By Organization: Future Labs, LLC
Organization Address: 124 Lone Wolf Drive,
Organization City: Madison
Organization State: MS
Organization Zipcode: 39110
Organization Email: alexh@futurelabsllc.com
Organization Phone:
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Viscosity 90

Test 2 of 5

DIME Test ID: 2025-02-25-9-2
Test Method: ASTM D1475-Nov13: Standard Test Method For Density of Liquid Coatings, Inks, and Related Products
Verified Date: 05/01/2025
Date Tested: 04/28/2025
Submitted By Organization: Future Labs, LLC
Organization Address: 124 Lone Wolf Drive,
Organization City: Madison
Organization State: MS
Organization Zipcode: 39110
Organization Email: alexh@futurelabsllc.com
Organization Phone:
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Density Units pounds/gallons
Liquid Density (pounds per gallon) 9

Test 3 of 5

DIME Test ID: 2025-02-25-9-3
Test Method: ASTM D638-Dec14: Standard Test Method for Tensile Properties of Plastics
Verified Date: 05/01/2025
Date Tested: 04/28/2025
Submitted By Organization: Future Labs, LLC
Organization Address: 124 Lone Wolf Drive,
Organization City: Madison
Organization State: MS
Organization Zipcode: 39110
Organization Email: alexh@futurelabsllc.com
Organization Phone:
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Number of specimens tested 6
Conditioning procedure 18/25/50+5/70
Speed of testing 0.45 in/min
Sample 1 Width 0.509 in
Sample 1 Ultimate strength 3007.2 psi
Sample 1 Thickness 0.247 in
Sample 1 Area 0.1257 in^2
Sample 1 Ultimate Strength Actual 378 lbs
Sample 1 percent elongation 63 %
Sample 1 Time no data0 MM:SS
Sample 2 Width 0.506 in
Sample 2 Thickness 0.249 in
Sample 2 Area 0.126 in^2
Sample 2 Ultimate strength 3174.6 psi
Sample 2 Ultimate Strength Actual 400 lbs
Sample 2 percent elongation 67 %
Sample 2 Time no data0 MM:SS
Sample 3 Width 0.508 in
Sample 3 Thickness 0.242 in
Sample 3 Area 0.1229 in^2
Sample 3 Ultimate strength 3035 psi
Sample 3 Ultimate Strength Actual 373 lbs
Sample 3 percent elongation 64 %
Sample 3 Time no data0 MM:SS
Sample 4 Width 0.509 in
Sample 4 Thickness 0.247 in
Sample 4 Area 0.1257 in^2
Sample 4 Ultimate strength 2792.4 psi
Sample 4 Ultimate Strength Actual 351 lbs
Sample 4 percent elongation 51 %
Sample 4 Time no data0 MM:SS
Sample 5 Width 0.509 in
Sample 5 Thickness 0.247 in
Sample 5 Area 0.1257 in^2
Sample 5 Ultimate strength 3086.7 psi
Sample 5 Ultimate Strength Actual 388 lbs
Sample 5 percent elongation 63 %
Sample 5 Time no data0 MM:SS
Sample 6 Width 0.504 in
Sample 6 Thickness 0.248 in
Sample 6 Area 0.125 in^2
Sample 6 Ultimate strength 3104 psi
Sample 6 Ultimate Strength Actual 388 lbs
Sample 6 percent elongation 65 %
Sample 6 Time no data0 MM:SS
Ultimate Strength Average 3033 psi
Percent Elongation Average 62 %

Test 4 of 5

DIME Test ID: 2025-02-25-9-4
Test Method: ASTM D2369-Jul10: Standard Test Method for Volatile Content of Coatings
Verified Date: 05/01/2025
Date Tested: 04/28/2025
Submitted By Organization: Future Labs, LLC
Organization Address: 124 Lone Wolf Drive,
Organization City: Madison
Organization State: MS
Organization Zipcode: 39110
Organization Email: alexh@futurelabsllc.com
Organization Phone:
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Mean of two volatile content determination 46

Test 5 of 5

DIME Test ID: 2025-02-25-9-5
Test Method: SCAQMD 309-91-Feb93: Determination of Static Volatile Emissions
Verified Date: 05/01/2025
Date Tested: 04/28/2025
Submitted By Organization: Future Labs, LLC
Organization Address: 124 Lone Wolf Drive,
Organization City: Madison
Organization State: MS
Organization Zipcode: 39110
Organization Email: alexh@futurelabsllc.com
Organization Phone:
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Diameter of lid 154.19 mm
Room Temperature 75 f
Tare weight no data
Initial weight 100.12 grams
Weight at 5 minutes 99.96 grams
Weight at 10 minutes 99.8 grams
Weight at 15 minutes 99.65 grams
Weight at 20 minutes 99.49 grams
Weight at 25 minutes 99.33 grams
Weight at 30 minutes 99.18 grams
Final weight 99.18 grams
Total weight loss 0.94 grams
Calculated radius of gallon can lid in cm 7.71 cm
Lid Factor 53.548 m^2
Volatile emission 50.335 grams/m^2